教育经历
  • 1985-9 — 1989-7
    天津大学
    化工机械
    工学学士学位
  • 2001-9 — 2005-6
    山东大学
    材料学
    工学博士学位
  • 1991-9 — 1994-3
    天津大学
    化工过程机械
    工学硕士学位
工作经历
  • 1989-7 — 1991-8
     河北省沧州市东风塑料厂 
  • 1994-4 — 2000-7
     山东工业大学 
  • 2000-7 — 至今
     山东大学 
研究方向
论文

(1) 刘燕.往复式压缩机的两种无级调节气量节能技术的对比与分析.石油化工设备.2022,51 (1):60

(2) 刘春娜.Energy Management Strategy for Plug-In Hybrid Electric Vehicles Based on Driving Condition Recognition: A Review.ELECTRONICS.2022,11 (3)

(3) 刘燕.A Rational Interpretation of the Role of Turbulence in Particle-Bubble Interactions.MINERALS.2021 (9)

(4) 刘燕.Discussion on the Teaching of "engineering Materials" with Philosophy Thoughts.2020

(5) 刘燕.Failure Analysis of Heat Exchange Tubes in hydrogenation unit.Engineering Failure Analysis.2021 (8)

(6) 刘燕.A Rational Interpretation of the Role of Turbulence in Particle-Bubble Interactions.MINERALS.2021 (9)

(7) 刘燕.Failure Analysis of Heat Exchange Tubes in hydrogenation unit.ENGINEERING FAILURE ANALYSIS.2021,129 (8)

(8) 刘燕.Fatigue behavior and mechanism of FV520B-I welding seams in a very high cycle regime..INTERNATIONAL JOURNAL OF FATIGUE.2016 (1)

(9) 刘燕.结构参数对RESS法制备超微粉体用环隙喷嘴外流场的影响.《工程热物理学报》.2018 (12)

(10) 刘燕.Structural and Regulating Characteristics of Adjustable Annulus-clearance Nozzle Used in Supercritical Fluid Precipitation.武汉理工大学学报.2017 (12)

(11) 刘燕.聚丙烯装置轴流泵机械密封损坏分析及处理措施.石油化工设备.2020,49 (6):68

(12) 刘燕.结构参数对RESS法用环隙喷嘴外流场的影响.工程热物理学报.2018 (12)

(13) 刘燕.粘性应力对空化核初生的影响.《工程热物理学报》.2013,34 (7):1266

(14) Qu Yanpeng.Structural and Regulating Characteristics of Adjustable Annulus-clearance Nozzle Used in Supercritical Fluid Precipitation.JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION.2017, 32 (6):1487

(15) 刘燕.The structural design of nozzle in outer mixing mode for preparing superfine particles by SCF technology.Advanced Materials research.2011

(16) 刘燕.Fatigue behavior and mechanism of FV520B-I welding seams in a very high cycle regime.International Journal of Fatigue.2016,87 :22

(17) 刘燕.粘性应力对空化核初生的影响.《工程热物理学报》.2013,34 (7):1266

(18) 刘燕.Non-dimensional Design Method for Pressure Vessels. .Advanced Materials Research ,Advanced Mechanical Design.2012,Vols. 479-481 (2012) :1704

(19) 刘燕.结构参数对RESS法用环隙喷嘴外流场的影响.工程热物理学报.2018 (12)

专利
版权所有   ©山东大学 地址:中国山东省济南市山大南路27号 邮编:250100 
查号台:(86)-0531-88395114
值班电话:(86)-0531-88364731 建设维护:山东大学信息化工作办公室