邹斌
-
教授
- 性别:男
- 在职信息:在职
- 所在单位:机械工程学院
- 入职时间: 2008-07-01
访问量:
-
[21]
丁守岭.
Microstructure, mechanical properties and machinability of 316L stainless steel fabricated by direct.
国际机械科学,
243,
2023.
-
[22]
陈清华.
SLA-3d printing and compressive strength of PEGDA/nHAP biomaterials.
CE,
2022.
-
[23]
陈清华.
Influence of irradiation parameters on the curing and interfacial tensile strength of HAP printed pa.
Journal of the European Ceramic Society,
2022.
-
[24]
邢宏宇.
Fabrication strategy of complicated Al2O3-Si3N4 functionally graded materials by stereolithography 3.
Journal of the European Ceramic Society,
40,
5797-5809,
2020.
-
[25]
王一顺.
Analyzing the performance of self-developed cermet micro end mills in machining of TC4 alloy micro-g.
71,
424-428,
2018.
-
[26]
胡宜帆.
Preparation of Mn–Zn ferrite ceramic using stereolithography 3D printing technology.
CE,
48,
6923-6932,
2021.
-
[27]
孙赫武.
Cutting performance of silicon-based ceramic end milling tools in high-efficiency machining of GH409.
international Journal of Advanced Manufacturing Technology,
118,
1719-1732,
2021.
-
[28]
王鹏.
Effects of FDM-3D printing parameters on mechanical properties and microstructure of CF/PEEK and GF/.
CHINESE JOURNAL OF AERONAUTICS,
34,
236-246,
2020.
-
[29]
于洋.
Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D p.
CE,
2022.
-
[30]
陈伟.
The machined surface defect detection of improved superpixel segmentation and two-level region aggre.
Journal of manufacturing processes,
80,
287-301,
2022.
-
[31]
王鹏.
Functionally graded polyetheretherketone-based composites additively manufactured by material extrus.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,
158,
2022.
-
[32]
孙赫武.
Effect of MQL condition on cutting performance of high-speed machining of GH4099 with ceramic end mi.
International Journal of Advanced Manufacturing Technology,
167,
2022.
-
[33]
王鑫锋.
Manufacturing of a ceramic groove part based on additive and subtractive technologies.
CE,
47,
740-747,
2020.
-
[34]
丁守岭.
Geometric modeling and recycling of 3D printed fiber reinforced thermoplastic composite plain weft k.
Composites Part A: Applied Science and Manufacturing,
149,
2021.
-
[35]
杨金照.
A study on the roughness detection for machined surface covered with chips based on deep learning.
Journal of manufacturing processes,
84,
77-87,
2022.
-
[36]
刘继凯.
Challenges in topology optimization for hybrid additive–subtractive manufacturing: A review.
Computer-Aided Design,
161,
2023.
-
[37]
段宁民.
Mechanically robust Ti3C2Tx MXene/Carbon fiber fabric/Thermoplastic polyurethane composite for effic.
materials and design,
214,
2022.
-
[38]
周龙.
Developing and Testing of the Principle Prototype for Efficient Micro-Damage Fine Stripping of Aspha.
Machines,
11,
2023.
-
[39]
赵红宇.
Additive manufacturing of graphene oxide/hydroxyapatite bioceramic scaffolds with reinforced osteoin.
Materials & Design,
2022.
-
[40]
刘玥.
High-temperature flexural strength and reliability of Ti(C5N5)-TiB2-(W7Ti3)C composite cermet tool m.
CE,
43,
12511-12518,
2017.