sunjie 山东大学主页平台管理系统--Home

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[221] guokai and sunjie. INVESTIGATION ON THE TOOL WEAR MODEL AND EQUIVALENT TOOL LIFE IN END MILLING TITANIUM ALLOY TI6AL.... PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4, 2018.
[222] sunjie and 孙杰. Modeling of cutting force under the tool flank wear effect in end milling Ti6Al4V with solid carb.... The International Journal of Advanced Manufacturing Technology, 69, 2545, 2013.
[223] WANG Weiqiang , sunjie and Li Jianfeng. Effect of cracked blade distribution on vibration characteristics of centrifugal impeller. 2013.
[224] Li Jianfeng , sunjie and huangpanling. 整体硬质合金立铣刀高速加工钛合金振动分析. 粉末冶金材料科学与工程, 15, 574, 2010.
[225] sunjie and Li Jianfeng. Study on crack sensitivity and tribological characterisation of functionally gradient material mu.... International Journal of Surface Science and Engineering, 9, 370, 2015.
[226] sunjie and Li Jianfeng. 纤维增强复合材料钻削分层的研磨检测. 航空制造技术, 73, 2015.
[227] sunjie and Li Jianfeng. Finite element simulation and Experimental investigation on the residual stress related monolithi.... international Journal of Advanced Manufacturing Technology, 77, 1035, 2015.
[228] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Typ.... Journal of Cleaner Production, 67, 258, 2014.
[229] sunjie and Li Jianfeng. 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究. 《中国激光》, 42, 61, 2015.
[230] sunjie and Li Jianfeng. Effect of initial residual stress and machining induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 61, 131, 2015.
[231] sunjie and Li Jianfeng. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials.... Materials Technology, 30, A46, 2015.
[232] sunjie and Li Jianfeng. Experimental investigation of the effect of tool geometry on residual stresses in high speed end .... International Journal of Surface Science and Engineering, 9, 359, 2015.
[233] sunjie and Li Jianfeng. An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbi.... International Journal of Machining and Machinability of Materials, 17, 319, 2015.
[234] Li Jianfeng , sunjie and Jia Xiujie. Influence of cutting tool blade passivation on cutting force and surface roughness. Computer Integrated Manufacturing Systems, 2011,17, 1430, 2011.
[235] sunjie and Li Jianfeng. TC4铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 36, 144, 2015.
[236] sunjie and Li Jianfeng. KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究. 机械工程学报, 51, 37, 2015.
[237] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.
[238] Li Jianfeng , sunjie , zhoujun and huangpanling. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.
[239] Li Jianfeng , sunjie and huangpanling. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End.... Key Engineering Materials, 443, 285, 2010.
[240] Li Jianfeng , sunjie and Jia Xiujie. 铝合金高速铣削过程切屑成形机制研究. 轻合金加工技术, 37, 52, 2009.

total310 12/16

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[221] guokai and sunjie. INVESTIGATION ON THE TOOL WEAR MODEL AND EQUIVALENT TOOL LIFE IN END MILLING TITANIUM ALLOY TI6AL.... PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4, 2018.

[222] sunjie and 孙杰. Modeling of cutting force under the tool flank wear effect in end milling Ti6Al4V with solid carb.... The International Journal of Advanced Manufacturing Technology, 69, 2545, 2013.

[223] WANG Weiqiang , sunjie and Li Jianfeng. Effect of cracked blade distribution on vibration characteristics of centrifugal impeller. 2013.

[224] Li Jianfeng , sunjie and huangpanling. 整体硬质合金立铣刀高速加工钛合金振动分析. 粉末冶金材料科学与工程, 15, 574, 2010.

[225] sunjie and Li Jianfeng. Study on crack sensitivity and tribological characterisation of functionally gradient material mu.... International Journal of Surface Science and Engineering, 9, 370, 2015.

[226] sunjie and Li Jianfeng. 纤维增强复合材料钻削分层的研磨检测. 航空制造技术, 73, 2015.

[227] sunjie and Li Jianfeng. Finite element simulation and Experimental investigation on the residual stress related monolithi.... international Journal of Advanced Manufacturing Technology, 77, 1035, 2015.

[228] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Typ.... Journal of Cleaner Production, 67, 258, 2014.

[229] sunjie and Li Jianfeng. 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究. 《中国激光》, 42, 61, 2015.

[230] sunjie and Li Jianfeng. Effect of initial residual stress and machining induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 61, 131, 2015.

[231] sunjie and Li Jianfeng. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials.... Materials Technology, 30, A46, 2015.

[232] sunjie and Li Jianfeng. Experimental investigation of the effect of tool geometry on residual stresses in high speed end .... International Journal of Surface Science and Engineering, 9, 359, 2015.

[233] sunjie and Li Jianfeng. An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbi.... International Journal of Machining and Machinability of Materials, 17, 319, 2015.

[234] Li Jianfeng , sunjie and Jia Xiujie. Influence of cutting tool blade passivation on cutting force and surface roughness. Computer Integrated Manufacturing Systems, 2011,17, 1430, 2011.

[235] sunjie and Li Jianfeng. TC4铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 36, 144, 2015.

[236] sunjie and Li Jianfeng. KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究. 机械工程学报, 51, 37, 2015.

[237] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.

[238] Li Jianfeng , sunjie , zhoujun and huangpanling. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.

[239] Li Jianfeng , sunjie and huangpanling. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End.... Key Engineering Materials, 443, 285, 2010.

[240] Li Jianfeng , sunjie and Jia Xiujie. 铝合金高速铣削过程切屑成形机制研究. 轻合金加工技术, 37, 52, 2009.