sunjie 山东大学主页平台管理系统--Home

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[241] Li Jianfeng , sunjie and huangpanling. Structure optimization of variable pitch helix end mills based on FEM simulation. Key Engineering Materials, 443, 291, 2010.
[242] Li Jianfeng , sunjie and huangpanling. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End.... Key Engineering Materials, 443, 285, 2010.
[243] Li Jianfeng , sunjie and huangpanling. 整体硬质合金立铣刀高速加工钛合金振动分析. 粉末冶金材料科学与工程, 15, 574, 2010.
[244] Li Jianfeng , sunjie and huangpanling. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle .... international Journal of Advanced Manufacturing Technology, 0, 1, 2012.
[245] Li Jianfeng , sunjie and Jia Xiujie. 刀具钝化对切削力及表面粗糙度的影响. 《计算机集成制造系统》, 17, 1430, 2011.
[246] sunjie , Li Jianfeng and Jia Xiujie. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.
[247] Li Jianfeng , sunjie and Jia Xiujie. Influence of cutting tool blade passivation on cutting force and surface roughness. Computer Integrated Manufacturing Systems, 2011,17, 1430, 2011.
[248] sunjie and Li Jianfeng. 纤维增强复合材料钻削分层的研磨检测. 航空制造技术, 73, 2015.
[249] sunjie and Li Jianfeng. TC4铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 36, 144, 2015.
[250] sunjie and Li Jianfeng. KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究. 机械工程学报, 51, 37, 2015.
[251] sunjie and Li Jianfeng. 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究. 《中国激光》, 42, 61, 2015.
[252] sunjie and Li Jianfeng. Experimental investigation of the effect of tool geometry on residual stresses in high speed end .... International Journal of Surface Science and Engineering, 9, 359, 2015.
[253] sunjie and Li Jianfeng. Finite element simulation and Experimental investigation on the residual stress related monolithi.... international Journal of Advanced Manufacturing Technology, 77, 1035, 2015.
[254] sunjie and Li Jianfeng. Effect of initial residual stress and machining induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 61, 131, 2015.
[255] sunjie and Li Jianfeng. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials.... Materials Technology, 30, A46, 2015.
[256] sunjie and Li Jianfeng. Study on crack sensitivity and tribological characterisation of functionally gradient material mu.... International Journal of Surface Science and Engineering, 9, 370, 2015.
[257] sunjie and Li Jianfeng. An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbi.... International Journal of Machining and Machinability of Materials, 17, 319, 2015.
[258] sunjie and Li Jianfeng. Study on chip morphology and milling characteristics of laser cladding layer. international Journal of Advanced Manufacturing Technology, 77, 783, 2015.
[259] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Typ.... Journal of Cleaner Production, 67, 258, 2014.
[260] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.

total293 13/15

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[241] Li Jianfeng , sunjie and huangpanling. Structure optimization of variable pitch helix end mills based on FEM simulation. Key Engineering Materials, 443, 291, 2010.

[242] Li Jianfeng , sunjie and huangpanling. Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End.... Key Engineering Materials, 443, 285, 2010.

[243] Li Jianfeng , sunjie and huangpanling. 整体硬质合金立铣刀高速加工钛合金振动分析. 粉末冶金材料科学与工程, 15, 574, 2010.

[244] Li Jianfeng , sunjie and huangpanling. Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle .... international Journal of Advanced Manufacturing Technology, 0, 1, 2012.

[245] Li Jianfeng , sunjie and Jia Xiujie. 刀具钝化对切削力及表面粗糙度的影响. 《计算机集成制造系统》, 17, 1430, 2011.

[246] sunjie , Li Jianfeng and Jia Xiujie. 立铣刀高速加工铝合金铣削力试验研究. 《组合机床与自动化加工技术》, 0, 71, 2007.

[247] Li Jianfeng , sunjie and Jia Xiujie. Influence of cutting tool blade passivation on cutting force and surface roughness. Computer Integrated Manufacturing Systems, 2011,17, 1430, 2011.

[248] sunjie and Li Jianfeng. 纤维增强复合材料钻削分层的研磨检测. 航空制造技术, 73, 2015.

[249] sunjie and Li Jianfeng. TC4铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 36, 144, 2015.

[250] sunjie and Li Jianfeng. KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究. 机械工程学报, 51, 37, 2015.

[251] sunjie and Li Jianfeng. 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究. 《中国激光》, 42, 61, 2015.

[252] sunjie and Li Jianfeng. Experimental investigation of the effect of tool geometry on residual stresses in high speed end .... International Journal of Surface Science and Engineering, 9, 359, 2015.

[253] sunjie and Li Jianfeng. Finite element simulation and Experimental investigation on the residual stress related monolithi.... international Journal of Advanced Manufacturing Technology, 77, 1035, 2015.

[254] sunjie and Li Jianfeng. Effect of initial residual stress and machining induced residual stress on the deformation of alu.... SV-Journal of Mechanical Engineering, 61, 131, 2015.

[255] sunjie and Li Jianfeng. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials.... Materials Technology, 30, A46, 2015.

[256] sunjie and Li Jianfeng. Study on crack sensitivity and tribological characterisation of functionally gradient material mu.... International Journal of Surface Science and Engineering, 9, 370, 2015.

[257] sunjie and Li Jianfeng. An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbi.... International Journal of Machining and Machinability of Materials, 17, 319, 2015.

[258] sunjie and Li Jianfeng. Study on chip morphology and milling characteristics of laser cladding layer. international Journal of Advanced Manufacturing Technology, 77, 783, 2015.

[259] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Typ.... Journal of Cleaner Production, 67, 258, 2014.

[260] Li Jianfeng , sunjie , zhoujun and huangpanling. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in mill.... international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.