1.
陈宇鑫.
响应面法优化CO_(2)亚临界态萃取等压超临界态分离核桃油工艺.
粮食与油脂,
36,
53-55,
2023.
2.
陈宇鑫.
响应面法优化CO2亚临界态萃取等压超临界态分离核桃油工艺.
粮食与油脂,
36,
53-55+71,
2023.
3.
侯凯文.
基于均匀设计的花生油亚/超临界CO2等压连续萃取分离工艺研究.
中国粮油学报 ?,
1-7,
2023.
4.
李建勋.
Mechanism and Method of Testing Fracture Toughness and Impact Absorbed Energy of Ductile Metals by Spherical Indentation Tests.
Chinese Journal of Mechanical Engineering (English Edition),
36,
2023.
5.
刘国祎.
响应面法和人工神经网络对亚临界CO2萃取红花籽油的建模与优化.
《食品工业科技》,
1-13,
2023.
6.
Wang, Pengfei.
Effects of Specimen Size and Welded Joints on the Very High Cycle Fatigue Properties of Compressor Blade Steel KMN-I.
COATINGS,
11,
2021.
7.
Wang, Pengfei.
Research on Residual Life Estimation Method for KMN Steel Based on Nonlinear Ultrasonic Testing.
Applied Sciences-Basel,
11,
2021.
8.
陈明亚.
Safety assessment of the small welded pipe system by the test and FEA.
INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING,
194,
2021.
9.
Wang, Pengfei.
Fatigue Damage Evaluation of Compressor Blade Based on Nonlinear Ultrasonic Nondestructive Testing.
Journal of Marine Science and Engineering,
9,
2021.
10.
王鹏飞.
Effects of microstructure and inclusions on very high cycle fatigue properties of compressor blade steels.
Strength Fract. Complex.,
10,
1,
2017.
11.
张泰瑞.
A STUDY ON THE BALL INDENTATION TEST FOR LINEAR HARDENING METALS.
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 7,
2017.
12.
Zhang, Zhuo.
Experimental Study on the Throttling Effect of SC-CO2 Containing Ethanol System Flowing Through the Coaxial Annular Nozzle and the Prediction Based on Artificial Neural Network.
INTERNATIONAL JOURNAL OF THERMOPHYSICS,
42,
2021.
13.
Zhang, Zhuo.
Experimental Study on the Throttling Effect of SC-CO2 Containing Ethanol System Flowing Through the Coaxial Annular Nozzle and the Prediction Based on Artificial Neural Network.
INTERNATIONAL JOURNAL OF THERMOPHYSICS,
42,
2021.
14.
张泰瑞.
Improving the tensile property calculations with plastic zone radius measurements in depth-sensing spherical indentation tests.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN,
2021.
15.
Zhang, Zhuo.
Establishment of the Predicting Models of the Dyeing Effect in Supercritical Carbon Dioxide Based on the Generalized Regression Neural Network and Back Propagation Neural Network.
PROCESSES,
8,
2020.
16.
张泰瑞.
A strain-pattern-based spherical indentation method for simultaneous uniaxial tensile residual stress and flow property determination.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN,
56,
50,
2021.
17.
张泰瑞.
An energy-based method for flow property determination from a single-cycle spherical indentation test (SIT).
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal,
171,
2020.
18.
王威强
, 李爱菊
and 张泰瑞.
THE SPHERICAL INDENTATION APPROACH FOR FRACTURE TOUGHNESS EVALUATION: A STUDY BASED ON THE ENERGY RELEASE RATE.
2018.
19.
王威强.
Structural Integrity Analysis of Two Over-Temperature Methanation Furnaces.
Journal of Failure Analysis and Prevention,
19,
230,
2019.
20.
王威强.
A comparative study on uniaxial tensile property calculation models in spherical indentation tests (SITs).
International Journal of Mechanical Sciences,
155,
159,
2019.
21.
王威强.
A study on determination of tensile properties of metals at elevated temperatures from spherical indentation tests.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN,
54,
331,
2019.
22.
王威强.
A comparative study on fracture toughness calculation models in spherical indentation tests (SITs) for ductile metals.
International Journal of Mechanical Sciences,
160,
114,
2019.
23.
王威强.
Dynamic Stress Analysis of Multilayered Structure with Radial Gaps of Cylindrical Pressure Vessel under Plane Strain Conditions.
Journal of Pressure Vessel Technology, Transactions of the ASME,
141,
41202,
2019.
24.
王威强.
Three-dimensional finite element analyses of repair process and safety margin assessment.
International Journal of Pressure Vessels and Piping,
172,
283,
2019.
25.
王威强
and 张泰瑞.
Determination of the proof strength and flow properties of materials from spherical indentation tests: An analytical approach based on the expanding cavity model.
Journal of Strain Analysis for Engineering Design,
48,
225,
2018.
26.
王威强
and 张泰瑞.
A constitutive model independent analytical method in determining the tensile properties from incremental spherical indentation tests (ISITs).
International Journal of Mechanical Sciences,
34,
2019,
2018.
27.
王威强
and 张泰瑞.
Improved methods to determine the elastic modulus and area reduction rate in spherical indentation tests.
Materialpruefung/Materials Testing,
32,
355,
2018.
28.
王威强
, 李剑峰
and 王鹏飞.
Research on fatigue damage of compressor blade steel KMN-I using nonlinear ultrasonic testing.
Shock and Vibration,
22,
2017.
29.
王威强.
Urea reactor integrity evaluation based on failure analysis.
Journal of Pressure Vessel Technology, Transa,
v 129,
744,
2007.
30.
王威强.
Application of the Analytic Hierarchy Process in Risk Analysis for Urea Reactor.
2nd International Conference on Risk Manageme,
2008.
31.
于美杰
, 王威强
and 王成国.
Thermal Properties of Acrylonitrile/Itaconic Acid Polymers in Oxidative and Nonoxidative Atmospheres.
Journal of applied polymer science,
116,
1207,
2010.
32.
王威强
, 曲延鹏
and 李爱菊.
超臨界流體噴染及其流場數值模擬研究.
第十一届2012年超临界流体技术应用与发展研讨会暨第二届海峡两岸超临界流体技术研讨会,
2012.
33.
王威强
and 曲延鹏.
超临界流体多过程试验平台研究.
第十届全国超临界流体技术学术及应用研讨会论文集,
2014.
34.
曲延鹏
and 王威强.
Novel Multi-Stream Plate Exchanger under High Pressure—Structure and its Design Method.
Advanced Materials research,
1062,
658,
2014.
35.
王威强.
尿素合成塔液相泄漏蒸气爆炸压力计算.
化肥工业,
39,
2012.
36.
王威强.
尿素合成塔爆破原因分析综述.
机械强度,
34,
427,
2012.
37.
曲延鹏
and 王威强.
用于超临界流体工艺过程的板式换热器.
第九届全国超临界流体技术学术及应用研讨会文集,
2012.
38.
曲延鹏
and 王威强.
超临界流体技术制备超微粉体用径向组合型喷嘴.
2008第七届全国超临界流体技术学术及应用研讨会,
2010.
39.
王威强.
FAULT TREE ANALYSIS ON SEAL FAILURE OF HIGH PRESSURE AMMONIUM CARBAMATE PUMP.
Proceedings of the 3rd World Congress on Engi,
2008.
40.
曲延鹏
, 王威强
and 李爱菊.
SCF快速膨胀过程流动模拟及其工艺参数的影响.
2008第七届全国超临界流体技术学术及应用研讨会,
2008.
41.
王威强.
基于ANSYS Workbench和FLUENT的超临界二氧化碳萃取釜流场模拟及其结构改进.
《化工进展》,
31,
1914,
2012.
42.
曲延鹏
, 王威强
and 李爱菊.
喷嘴和结晶器结构及参数对SAS法制备超微粉体的影响.
第八屆2009年超臨界流體技術應用與發展研討會,
2009.
43.
王威强.
奥氏体不锈钢换热管应力腐蚀开裂分析.
《化工机械》,
2012.
44.
王威强
, 李爱菊
and 曲延鹏.
超临界流体多工艺过程试验平台的模块化设计.
第九届全国超临界流体技术学术及应用研讨会文集,
2012.
45.
王威强
and 曲延鹏.
超临界流体技术制备超微粉体喷嘴结构设计.
中国粉体工业,
2007.
46.
王威强.
局部冲击压力下多层包扎容器弹性动力响应分析.
石油化工设备,
41,
34,
2012.
47.
王威强.
活塞式压缩机联轴器连接螺栓断裂原因分析.
理化检验-物理分册,
48,
203,
2012.
48.
王威强.
超临界流体技术制备超微粉体的新型喷嘴.
《化工机械》,
35,
374,
2008.
49.
王威强.
尿素合成塔爆炸载荷类型与破坏形态的关系分析.
山东大学学报（工学版）,
38,
51,
2008.
50.
王威强.
磁致伸缩导波技术检测管道缺陷.
《无损检测》,
30,
434,
2008.
51.
王威强.
多层包扎尿素合成塔应力状况分析.
机械强度,
30,
93,
2008.
52.
王威强.
WNN优化模型在模拟超临界二氧化碳中固体溶解度的应用.
天然气化工(C1化学与化工),
33,
75,
2008.
53.
王威强.
平阴尿塔的物料和爆炸能量估算.
山东大学学报（工学版）,
38,
46,
2008.
54.
王威强
and 曲延鹏.
新型超临界流体染色器设计.
2008第七届全国超临界流体技术学术及应用研讨会论文集,
2008.
55.
王威强.
Urea reactor integrity evaluation based on failure analysis.
Journal of Pressure Vessel Technology, Transa,
v 129,
744,
2007.
56.
王威强.
氨合成废热锅炉换热管应力腐蚀开裂分析.
《压力容器》,
25,
41,
2008.
57.
李爱菊
and 王威强.
聚苯硫醚/石墨基双极板复合材料性能的研究.
《人工晶体学报》,
37,
819,
2008.
58.
王威强.
Structural and Regulating Characteristics of Adjustable Annulus-clearance Nozzle Used in Supercritical Fluid Precipitation.
武汉理工大学学报（材料科学版）（英文版）,
32,
1487,
2017.
59.
王威强
, 曲延鹏
and 李爱菊.
Structural and regulating characteristics of adjustable annulus-clearance nozzle used in supercritical fluid precipitation.
Journal Wuhan University of Technology, Materials Science Edition,
32,
1487,
2017.
60.
王威强.
尿素合成塔层板严重腐蚀开裂分析.
化工机械新技术研究进展,
2008.
61.
王威强.
磁致伸缩导波技术在构件腐蚀检测中的应用实践.
无损探伤,
2008年卷,
18,
2008.
62.
王威强.
水溶液全循环尿素生产装置中静设备失效类型和机理研究.
化工机械新技术研究进展,
2008.
63.
王威强.
疲劳概率模型的综合评价方法.
中国机械工程,
19,
2812,
2008.
64.
王威强.
平阴尿塔塔体爆炸能量分析与计算.
山东大学学报（工学版）,
38,
80,
2008.
65.
王威强.
合成氨装置风险预测控制系统的研究.
化工机械新技术研究进展,
2008.
66.
王威强.
尿素合成塔物料蒸气爆炸初步研究.
化工机械新技术研究进展,
2008.
67.
王威强.
锅炉汽包至上集箱间联络管爆破原因分析.
《压力容器》,
25,
33,
2008.
68.
王威强
and 张乐文.
FEM analyses of stress and deformation of a flexible inner pressure bolt.
Journal of China University of Mining and Tec,
18,
584,
2008.
69.
王威强.
Catastrophic Explosion of a Multilayered Urea Reactor.
Ammonia Plant Safety and Related Facilities,
2008.
70.
王威强.
Application of the Analytic Hierarchy Process in Risk Analysis for Urea Reactor.
2nd International Conference on Risk Manageme,
2008.
71.
王威强.
尿素合成塔风险分析.
腐蚀科学与防护技术,
20,
377,
2008.
72.
王威强.
尿素合成塔层板开裂规律及原因分析.
全国化工过程机械博士研究生创新研讨会论文摘要集，2009，南京,
2009.
73.
王威强.
锅炉水冷壁管腐蚀爆裂失效分析.
压力容器先进技术——第八届全国压力容器学术会议,
2013.
74.
李剑峰
, 王威强
and 孙杰.
Effect of cracked blade distribution on vibration characteristics of centrifugal impeller.
Applied Mechanics and Materials,
2013.
75.
王威强.
Failure analysis of spiral plate heat exchanger.
Applied Mechanics and Materials,
2011.
76.
王威强
and 李爱菊.
Study on the microstructure of 20 steel with strain aging.
Proceedings of ASME 2011 Pressure Vessels and,
2011.
77.
王威强.
Failure analysis of 20G boiler tubes.
International Symposium on Structural Integri,
2010.
78.
王威强
and 李爱菊.
避免Q245钢厚壁高压管应变时效脆化的试验研究.
第七届全国压力容器学术会议论文集,
2009.
79.
王威强.
Root cause analysis of stress corrosion at tube-to-tubesheet joints of a waste heat boiler.
Engineering Failure Analysis,
45,
398,
2014.
80.
王威强.
通过标准规避高压钢管应变时效脆化的发生.
《压力容器》,
27,
45,
2010.
81.
王威强
and 曲延鹏.
超临界流体喷染的原理及研究进展.
第十届全国超临界流体技术学术及应用研讨会论文集,
2014.
82.
王威强.
Research on the properties of 20G steel with strain aging embrittlement using indentation test.
East China University of Science and Technology Press，2012,
2012.
83.
王威强.
The pressure variation of BLEVE triggered by liquid release through a crack in the cylindrical pressure vessel.
East China University of Science and Technology Press，2012,
2012.
84.
王威强
, 王彦明
and 李爱菊.
Effect of fiber surface treatment techniques on properties of short carbon fiber reinforced phenol formaldehyde resin/graphite composite bipolar plate.
Advanced Materials research.,
2011.
85.
王威强.
Preparation of ultra-fine powder using supercritical fluids: A review.
Applied Mechanics and Materials,
2011.
86.
王威强
and 李爱菊.
消除Q245钢应变时效脆化的理论分析及试验研究.
第七届全国压力容器学术会议论文集,
2009.
87.
王威强.
The stress corrosion cracking of austenitic stainless steel heat exchange tubes—three cases study.
Proceedings of the ASME 2010 Pressure Vessels,
2010.
88.
王威强
and 李爱菊.
The Fracture Failure Analysis of a Hot Pure Water Storage Container.
Procedia Engineering,
2015.
89.
王威强
and 曲延鹏.
Effects of austenitic stainless steel tube and tubesheet hole dimensional deviations on the hydraulic expansion pressure.
International Journal of Pressure Vessels and Piping,
138,
1,
2016.
90.
王威强
and 曲延鹏.
A Fortran implementation of isogeometric analysis for thin plate problems with the penalty method.
Engineering Computations,
33,
2149,
2016.
91.
王威强.
Using FEM to predict residual stresses in girth welding joint of layered cylindrical vessels.
International Journal of Pressure Vessels and Piping,
119,
1,
2014.
92.
王威强
and 李剑峰.
Fatigue behavior and mechanism of FV520B-I in ultrahigh cycle regime.
Procedia Materials Science,
2014.
93.
王威强.
Residual stresses in the welding joint of the nozzle-to-head area of a layered high-pressure hydrogen storage tank.
International journal of hydrogen energy,
39,
11061,
2014.
94.
王威强.
On-Line monitoring method for centrifugal compressor and impeller remanufacturing.
East China University of Science and Technology Press，2012,
2012.
95.
王威强.
Failure analysis of a bellows expansion joint of inconel625 alloy.
Advanced Materials research,
2012.
96.
王威强.
甲胺反应器严重开裂原因分析..
第七届全国压力容器学术会议论文集,
2009.
97.
王威强
and 李爱菊.
Study on the Brittle Fracture of the Q245 Steel High Pressure Piping in an Ammonia Synthesis Unit.
The 12th International Conference on Pressure,
2009.
98.
王威强
and 李爱菊.
Analysis on layer cracking of urea reactors.
Proceedings of the ASME 2010 Pressure Vessels,
2010.
99.
王威强
and 李爱菊.
The stress distribution and critical c rack length analysis of a cracked multilayer urea reactor.
East China University of Science and Technology Press，2012,
2012.
100.
王威强
and 曲延鹏.
重整氢压缩机连杆螺栓断裂失效分析.
金属热处理,
41,
200,
2016.
101.
王威强.
20(G)板不同焊接缺陷的磁记忆信号检测分析.
中国特种设备安全,
32,
33,
2016.
102.
王威强
and 曲延鹏.
基于场协同原理的管道经济管径计算新方法.
流体机械,
44,
32,
2016.
103.
王威强.
A New Method to the Elastodynamic Response of a Spherical Shell Under the Impact Load.
Journal of Pressure Vessel Technology,
138,
345011,
2016.
104.
王威强
and 曲延鹏.
Probability Analysis of Pit Initiation on Austenitic Stainless Steels.
Procedia Engineering,
2015.
105.
王威强.
The Measurement of Mechanical Properties of Pipe Steels in Service through Continuous Ball Indentation Test.
Procedia Engineering,
2015.
106.
王威强
and 曲延鹏.
Failure analysis of austenitic stainless pipes in amine liquid regeneration unit of a desulfurizer.
Engineering Failure Analysis,
57,
164,
2015.
107.
王威强.
水冷壁管开裂原因分析.
化工装备,
37,
2015.
108.
王威强.
连续球压痕法测试压力容器钢力学性能的研究.
振动.测试与诊断,
35,
281,
2015.
109.
王威强.
Failure analysis of stress corrosion cracking in heat exchanger tubes during start-up operation.
Engineering Failure Analysis,
51,
1,
2015.
110.
王威强
and 李剑峰.
Fatigue behavior and mechanism of FV520B in very high cycle regime.
Strength, Fracture and Complexity,
9,
161,
2015.
111.
王威强.
Mathematical model for tension of textile during the process of supercritical fluids spray dyeing.
Advanced Materials Research,
2014.
112.
王威强.
法兰密封系统应力松弛有限元分析.
《压力容器》,
30,
23,
2013.
113.
王威强.
Study on the strength of textile during the process of supercritical fluids spray dyeing.
Advanced Materials Research,
2014.
114.
王威强.
SCF preparation of drug particle using size adjustable nozzle.
Key Engineering Materials,
2012.
115.
王威强
, 曲延鹏
and 陈颂英.
Significance analysis on influential factors of stress corrosion based on grey relational theory for stainless steels.
East China University of Science and Technology Press，2012,
2012.
116.
王威强.
The feasibility of research for shell deformations with isogeometric analysis.
East China University of Science and Technology Press，2012,
2012.
117.
王威强.
Failure analysis of the pure zirconium hanging sample for acetic anhydride reactor.
East China University of Science and Technology Press，2012,
2012.
118.
王威强.
Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger.
International Journal of Pressure Vessels and Piping,
101,
37,
2013.
119.
李剑峰
, 王威强
and 孙杰.
Effect of cracked blade distribution on strength of centrifugal impeller.
Applied Mechanics and Materials,
2013.
120.
王威强.
A new approach to elastodynamic response of cylindrical shell based on developed solution structure theorem for wave equation.
Journal of Pressure Vessel Technology, Transactions of the ASME,
134,
112101,
2011.
121.
王威强.
Analysis on elastoplastic stress distribution in a layered cylindrical vessel with interlayer gaps.
Journal of Pressure Vessel Technology, Transactions of the ASME,
134,
312061,
2012.
122.
王威强.
Solution of gas explosion load and simulation of dynamic response of multilayer structures.
Advanced Materials research.,
2012.
123.
王威强
and 曲延鹏.
Supercritical fluid pray dyeing: A new method of dyeing and simulations of its flow field..
Advanced Materials research,
2011.
124.
王威强
and 李爱菊.
热处理避免和消除20钢厚壁高压管应变时效脆化实验研究.
《材料工程》,
2011年卷,
57,
2011.
125.
王威强
, 曲延鹏
and 管从胜.
管壳式固定床反应器爆炸事故分析.
《化工机械》,
37,
222,
2010.
126.
王威强.
我国特种设备事故调查与处理体制的思考.
中国特种设备安全,
2010年卷,
33,
2010.
127.
王威强
and 李爱菊.
A simplification method of defects in multilayered vessels detected by acoustic emission detection.
Fracture Mechanics and Structural Integrity S,
2009.
128.
王威强.
The exploration of strain aging embrittlement evaluation in metallic materials using indentation test.
Proceedings of 2011 International Symposium o,
2011.
129.
王威强
and 李爱菊.
Study on the composites of phenol formaldehyde resin/graphite reinforced by milled carbon fibers for bipolar plates.
Advanced Materials Research,
2010.
130.
王威强.
Grey predication of corrosion on oil atmospheric distillation equipment.
2009 4th IEEE Conference on Industrial Electr,
2009.
131.
王威强
and 曲延鹏.
Preparation of Cefquinome Nanoparticles by Using the Supercritical Antisolvent Process.
Journal of Nanomaterials,
2015(ID: 767945 ),
1,
2015.
132.
王威强
and 李爱菊.
Failure analysis of the brittle fracture of thick-walled 20 steel pipe in an ammonia synthesis unit.
Engineering Failure Analysis,
17,
1359,
2010.
133.
王威强.
我国高压管道标准中某些规定存在的问题与思考.
压力管道技术研究进展精选集——第四届全国管道技术学术会议，2010 ,
2010.
134.
王威强.
Grey decision on oil distillation tower top exchangers maintenance overhaul.
2009 4th IEEE Conference on Industrial Electr,
2009.
135.
王威强
and 李剑峰.
连续球压痕测定常用叶轮材料力学性能的研究.
流体机械,
43,
7,
2015.
136.
王威强.
A new approach to elastodynamic response of cylindrical shell based on generalized solution structure theorem for wave equation.
Proceedings of the ASME 2010 Pressure Vessels,
2010.
137.
王威强.
Modified formulation of layer stresses due to Internal pressure of a layered vessel with interlayer gaps.
Journal of Pressure Vessel Technology, Transa,
132,
5120101,
2010.
138.
王威强.
A Fortran implementation of isogeometric analysis with superiority in convergence and accuracy.
Procedia Engineering,
2015.
139.
王威强
and 曲延鹏.
超临界流体染纱器现状与新型结构.
《现代化工》,
30,
65,
2010.
140.
李燕乐
, 王威强
, 李方义
and 李剑峰.
Damage mechanism and evaluation model of compressor impeller remanufacturing blanks: A review.
Frontiers of Mechanical Engineering,
2019.
141.
李爱菊
and 王威强.
Effects of resin content and preparing conditions on the properties of polyphenylene sulfide resin/graphite composite for bipolar plate.
JOURNAL OF POWER SOURCES,
178,
363,
2008.
142.
王威强
and 李爱菊.
The explosion reason analysis of urea reactor of Pingyin.
Engineering Failure Analysis,
16,
972,
2009.
143.
王威强.
平阴尿素合成塔起爆源处层板应力腐蚀开裂分析.
金属热处理,
34,
104,
2009.
144.
王威强.
尿素合成塔蒸汽爆炸机理及可能断裂过程分析.
全国化工过程机械博士研究生创新研讨会论文摘要集，2009，南京,
2009.
145.
王威强.
尿素合成塔爆炸原因分析研究进展.
全国化工过程机械博士研究生创新研讨会，2009，南京,
2009.
146.
王威强
and 张国新.
自动球压痕法估测Q235B钢的断裂韧度.
机械强度,
2018.
147.
王威强
and 王尚.
电工层压木静态力学性能测试.
中南林业科技大学学报,
2018.
148.
王威强
and 张明.
余热锅炉给水泵轴瓦失效分析.
齐鲁工业大学学报,
2018.
149.
王威强
and 郭建章.
基于均匀设计和BP神经网络的花生油SFE-CO_2萃取预测.
食品科学技术学报,
2018.
150.
王威强
and 郭建章.
基于均匀设计的SFE-CO_2萃取花生油工艺.
陕西农业科学,
2018.
151.
王威强
and 牛俊男.
超临界二氧化碳喷染器中平滑式迷宫密封结构对密封性的影响.
润滑与密封,
2018.
152.
王威强
and 王尚.
最小二乘法估算变压器绝缘件瑞利阻尼系数的可行性研究.
机械科学与技术,
2018.
153.
王威强
, 曲延鹏
and 肖克峰.
Cefquinome Controlled Size Submicron Particles Precipitation by SEDS Process Using Annular Gap Nozzle.
Int. J. Chem. Eng.,
2017,
2017.
154.
王威强
and 李梦丽.
Study on the Microstructure and Mechanical Properties of 20 Steel Strain Aging.
PROCEEDINGS OF THE 2017 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTER (MACMC 2017),
150,
268,
2017.
155.
王威强
and 张泰瑞.
Determination of the proof strength and flow properties of materials from spherical indentation tests: An analytical approach based on the expanding cavity model.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN,
53,
225,
2018.
156.
王威强
and 张泰瑞.
Improved methods to determine the elastic modulus and area reduction rate in spherical indentation tests.
MATERIALS TESTING,
60,
355,
2018.
157.
王威强
and 张泰瑞.
Method to determine the optimal constitutive model from spherical indentation tests.
Results in Physics,
8,
716,
2018.
158.
王威强
and Xu, Shugen.
Numerical investigation of thermo-mechanical stress in U-tube including forming effect for the SCC failure analysis.
Engineering Failure Analysis,
77,
126,
2017.
159.
王威强
, 李剑峰
and 王鹏飞.
Research on Fatigue Damage of Compressor Blade Steel KMN-I Using Nonlinear Ultrasonic Testing.
Shock and vibration,
0,
2017.
160.
王威强
and 张泰瑞.
A constitutive model independent analytical method in determining the tensile properties from incremental spherical indentation tests (ISITs).
International Journal of Mechanical Sciences,
148,
9,
2018.
161.
陈颂英
and 王威强.
Numerical simulation of dispersed phase flow in a tube considering bubbles erosion and Cl- ions concentration effects.
Advanced Materials research,
314-316,
1069,
2011.
162.
于美杰
and 王威强.
聚丙烯腈预氧丝皮芯结构的影响因素与防控措施..
《功能材料》,
41,
1019,
2010.
163.
王威强
and 李剑峰.
Fatigue behavior and mechanism of FV520B-I welding seams in a very high cycle regime.
International Journal of Fatigue,
87,
22,
2016.
164.
李爱菊
and 王威强.
树脂/石墨PEMFC双极板的制备工艺与性能研究综述.
《材料导报》,
27,
87,
2013.
165.
王成国
, 王威强
and 于美杰.
Thermal Properties of Acrylonitrile/Itaconic Acid Polymers in Oxidative and Nonoxidative Atmospheres.
Journal of applied polymer science,
116,
1207,
2010.
166.
曲延鹏
and 王威强.
The structural design of nozzle in outer mixing mode for preparing superfine particles by SCF technology.
Advanced Materials Research ,
2011.
167.
王威强
and 杨炎.
服役后16Mn管材应变时效的自动球压痕测试.
山东大学学报（工学版）,
47,
64,
2017.
168.
王威强
and 张泰瑞.
A unified energy release rate based model to determine the fracture toughness of ductile metals from unnotched specimens.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal,
150,
35,
2019.
169.
王威强
, 李剑峰
and 王鹏飞.
Fatigue behavior and mechanism of KMN in a very high cycle regime.
MATERIALS TESTING,
60,
55,
2018.
170.
曲延鹏
and 王威强.
超临界流体多过程试验平台研究.
2014.
171.
王威强.
尿素合成塔液相泄漏蒸气爆炸压力计算.
化肥工业,
39,
2012.
172.
王威强
and 曲延鹏.
用于超临界流体工艺过程的板式换热器.
2012.
173.
王威强
and 曲延鹏.
超临界流体技术制备超微粉体用径向组合型喷嘴.
2010.
174.
王威强.
FAULT TREE ANALYSIS ON SEAL FAILURE OF HIGH PRESSURE AMMONIUM CARBAMATE PUMP.
2008.
175.
王威强.
基于ANSYS Workbench和FLUENT的超临界二氧化碳萃取釜流场模拟及其结构改进.
《化工进展》,
31,
1914,
2012.
176.
王威强.
奥氏体不锈钢换热管应力腐蚀开裂分析.
《化工机械》,
2012.
177.
王威强.
局部冲击压力下多层包扎容器弹性动力响应分析.
石油化工设备,
41,
34,
2012.
178.
王威强.
活塞式压缩机联轴器连接螺栓断裂原因分析.
理化检验-物理分册,
48,
203,
2012.
179.
王威强.
尿素合成塔爆炸载荷类型与破坏形态的关系分析.
山东大学学报（工学版）,
38,
51,
2008.
180.
王威强.
磁致伸缩导波技术检测管道缺陷.
《无损检测》,
30,
434,
2008.
181.
王威强.
多层包扎尿素合成塔应力状况分析.
机械强度,
30,
93,
2008.
182.
王威强.
WNN优化模型在模拟超临界二氧化碳中固体溶解度的应用.
天然气化工(C1化学与化工),
33,
75,
2008.
183.
王威强.
平阴尿塔的物料和爆炸能量估算.
山东大学学报（工学版）,
38,
46,
2008.
184.
王威强.
Urea reactor integrity evaluation based on failure analysis.
Journal of Pressure Vessel Technology, Transa,
v 129,
744,
2007.
185.
王威强.
氨合成废热锅炉换热管应力腐蚀开裂分析.
《压力容器》,
25,
41,
2008.
186.
王威强
and 李爱菊.
聚苯硫醚/石墨基双极板复合材料性能的研究.
《人工晶体学报》,
37,
819,
2008.
187.
王威强.
Structural and Regulating Characteristics of Adjustable Annulus-clearance Nozzle Used in Supercritical Fluid Precipitation.
武汉理工大学学报（材料科学版）（英文版）,
32,
1487,
2017.
188.
曲延鹏
, 李爱菊
and 王威强.
Structural and regulating characteristics of adjustable annulus-clearance nozzle used in supercritical fluid precipitation.
Journal Wuhan University of Technology, Materials Science Edition,
32,
1487,
2017.
189.
王威强.
尿素合成塔层板严重腐蚀开裂分析.
2008.
190.
王威强.
磁致伸缩导波技术在构件腐蚀检测中的应用实践.
无损探伤,
2008年卷,
18,
2008.
191.
王威强.
水溶液全循环尿素生产装置中静设备失效类型和机理研究.
2008.
192.
王威强.
疲劳概率模型的综合评价方法.
中国机械工程,
19,
2812,
2008.
193.
王威强.
平阴尿塔塔体爆炸能量分析与计算.
山东大学学报（工学版）,
38,
80,
2008.
194.
王威强.
合成氨装置风险预测控制系统的研究.
2008.
195.
王威强.
尿素合成塔物料蒸气爆炸初步研究.
2008.
196.
王威强.
Catastrophic Explosion of a Multilayered Urea Reactor.
2008.
197.
王威强.
Application of the Analytic Hierarchy Process in Risk Analysis for Urea Reactor.
2008.
198.
王威强.
尿素合成塔风险分析.
腐蚀科学与防护技术,
20,
377,
2008.
199.
王威强.
尿素合成塔层板开裂规律及原因分析.
2009.
200.
王威强.
锅炉水冷壁管腐蚀爆裂失效分析.
2013.
201.
王威强.
Failure analysis of spiral plate heat exchanger.
2011.
202.
王威强.
Failure analysis of 20G boiler tubes.
2010.
203.
王威强.
Root cause analysis of stress corrosion at tube-to-tubesheet joints of a waste heat boiler.
Engineering Failure Analysis,
45,
398,
2014.
204.
曲延鹏
and 王威强.
超临界流体喷染的原理及研究进展.
2014.
205.
王威强.
Research on the properties of 20G steel with strain aging embrittlement using indentation test.
2012.
206.
王威强.
The pressure variation of BLEVE triggered by liquid release through a crack in the cylindrical pressure vessel.
2012.
207.
王威强.
Preparation of ultra-fine powder using supercritical fluids: A review.
2011.
208.
王威强.
The stress corrosion cracking of austenitic stainless steel heat exchange tubes—three cases study.
2010.
209.
王威强.
Using FEM to predict residual stresses in girth welding joint of layered cylindrical vessels.
International Journal of Pressure Vessels and Piping,
119,
1,
2014.
210.
李剑峰
and 王威强.
Fatigue behavior and mechanism of FV520B-I in ultrahigh cycle regime.
2014.
211.
王威强.
Residual stresses in the welding joint of the nozzle-to-head area of a layered high-pressure hydrogen storage tank.
International journal of hydrogen energy,
39,
11061,
2014.
212.
王威强.
On-Line monitoring method for centrifugal compressor and impeller remanufacturing.
2012.
213.
王威强.
Failure analysis of a bellows expansion joint of inconel625 alloy.
2012.
214.
王威强.
甲胺反应器严重开裂原因分析..
2009.
215.
李爱菊
and 王威强.
The stress distribution and critical c rack length analysis of a cracked multilayer urea reactor.
2012.
216.
王威强.
20(G)板不同焊接缺陷的磁记忆信号检测分析.
中国特种设备安全,
32,
33,
2016.
217.
王威强.
A New Method to the Elastodynamic Response of a Spherical Shell Under the Impact Load.
Journal of Pressure Vessel Technology,
138,
345011,
2016.
218.
王威强.
The Measurement of Mechanical Properties of Pipe Steels in Service through Continuous Ball Indentation Test.
2015.
219.
王威强.
水冷壁管开裂原因分析.
化工装备,
37,
2015.
220.
王威强.
连续球压痕法测试压力容器钢力学性能的研究.
振动.测试与诊断,
35,
281,
2015.
221.
王威强.
Failure analysis of stress corrosion cracking in heat exchanger tubes during start-up operation.
Engineering Failure Analysis,
51,
1,
2015.
222.
王威强.
Mathematical model for tension of textile during the process of supercritical fluids spray dyeing.
2014.
223.
王威强.
法兰密封系统应力松弛有限元分析.
《压力容器》,
30,
23,
2013.
224.
王威强.
Study on the strength of textile during the process of supercritical fluids spray dyeing.
2014.
225.
王威强.
SCF preparation of drug particle using size adjustable nozzle.
2012.
226.
曲延鹏
, 陈颂英
and 王威强.
Significance analysis on influential factors of stress corrosion based on grey relational theory for stainless steels.
2012.
227.
王威强.
The feasibility of research for shell deformations with isogeometric analysis.
2012.
228.
王威强.
Failure analysis of the pure zirconium hanging sample for acetic anhydride reactor.
2012.
229.
王威强.
Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger.
International Journal of Pressure Vessels and Piping,
101,
37,
2013.
230.
王威强
, 孙杰
and 李剑峰.
Effect of cracked blade distribution on strength of centrifugal impeller.
2013.
231.
王威强.
A new approach to elastodynamic response of cylindrical shell based on developed solution structure theorem for wave equation.
Journal of Pressure Vessel Technology, Transactions of the ASME,
134,
112101,
2011.
232.
王威强.
Analysis on elastoplastic stress distribution in a layered cylindrical vessel with interlayer gaps.
Journal of Pressure Vessel Technology, Transactions of the ASME,
134,
312061,
2012.
233.
曲延鹏
and 王威强.
Supercritical fluid pray dyeing: A new method of dyeing and simulations of its flow field..
2011.
234.
王威强.
The exploration of strain aging embrittlement evaluation in metallic materials using indentation test.
2011.
235.
王威强.
Grey predication of corrosion on oil atmospheric distillation equipment.
2009.
236.
王威强.
Grey decision on oil distillation tower top exchangers maintenance overhaul.
2009.
237.
王威强.
A new approach to elastodynamic response of cylindrical shell based on generalized solution structure theorem for wave equation.
2010.
238.
王威强.
Modified formulation of layer stresses due to Internal pressure of a layered vessel with interlayer gaps.
Journal of Pressure Vessel Technology, Transa,
132,
5120101,
2010.
239.
王威强.
A Fortran implementation of isogeometric analysis with superiority in convergence and accuracy.
2015.
240.
王威强
, 李方义
, 李剑峰
and 李燕乐.
Damage mechanism and evaluation model of compressor impeller remanufacturing blanks: A review.
Frontiers of Mechanical Engineering,
2019.
241.
王威强
and 李爱菊.
Effects of resin content and preparing conditions on the properties of polyphenylene sulfide resin/graphite composite for bipolar plate.
JOURNAL OF POWER SOURCES,
178,
363,
2008.
242.
王威强.
平阴尿素合成塔起爆源处层板应力腐蚀开裂分析.
金属热处理,
34,
104,
2009.
243.
王威强.
尿素合成塔蒸汽爆炸机理及可能断裂过程分析.
2009.
244.
王威强.
尿素合成塔爆炸原因分析研究进展.
2009.
245.
王威强
and 陈颂英.
Numerical simulation of dispersed phase flow in a tube considering bubbles erosion and Cl- ions concentration effects.
Advanced Materials research,
314-316,
1069,
2011.
246.
王威强
and 于美杰.
聚丙烯腈预氧丝皮芯结构的影响因素与防控措施..
《功能材料》,
41,
1019,
2010.
247.
王威强
and 李爱菊.
树脂/石墨PEMFC双极板的制备工艺与性能研究综述.
《材料导报》,
27,
87,
2013.
248.
王成国
, 王威强
and 于美杰.
Thermal Properties of Acrylonitrile/Itaconic Acid Polymers in Oxidative and Nonoxidative Atmospheres.
Journal of applied polymer science,
116,
1207,
2010.
249.
王威强
and 李爱菊.
聚苯硫醚/石墨基双极板复合材料性能的研究.
《人工晶体学报》,
37,
819,
2008.
250.
曲延鹏
, 李爱菊
and 王威强.
Structural and regulating characteristics of adjustable annulus-clearance nozzle used in supercritical fluid precipitation.
Journal Wuhan University of Technology, Materials Science Edition,
32,
1487,
2017.
251.
李爱菊
, 曲延鹏
and 王威强.
超临界流体多工艺过程试验平台的模块化设计.
2012.
252.
曲延鹏
and 王威强.
超临界流体技术制备超微粉体喷嘴结构设计.
2007.
253.
王威强.
局部冲击压力下多层包扎容器弹性动力响应分析.
石油化工设备,
41,
34,
2012.
254.
王威强.
活塞式压缩机联轴器连接螺栓断裂原因分析.
理化检验-物理分册,
48,
203,
2012.
255.
王威强.
Structural and Regulating Characteristics of Adjustable Annulus-clearance Nozzle Used in Supercritical Fluid Precipitation.
武汉理工大学学报（材料科学版）（英文版）,
32,
1487,
2017.
256.
王威强
and 李爱菊.
Effects of resin content and preparing conditions on the properties of polyphenylene sulfide resin/graphite composite for bipolar plate.
JOURNAL OF POWER SOURCES,
178,
363,
2008.
257.
曲延鹏
, 李爱菊
and 王威强.
超臨界流體噴染及其流場數值模擬研究.
2012.
258.
曲延鹏
and 王威强.
超临界流体多过程试验平台研究.
2014.
259.
王威强
and 曲延鹏.
Novel Multi-Stream Plate Exchanger under High Pressure—Structure and its Design Method.
Advanced Materials research,
1062,
658,
2014.
260.
王威强.
尿素合成塔液相泄漏蒸气爆炸压力计算.
化肥工业,
39,
2012.
261.
王威强.
尿素合成塔爆破原因分析综述.
机械强度,
34,
427,
2012.
262.
王威强
and 曲延鹏.
用于超临界流体工艺过程的板式换热器.
2012.
263.
王威强
and 曲延鹏.
超临界流体技术制备超微粉体用径向组合型喷嘴.
2010.
264.
王威强.
FAULT TREE ANALYSIS ON SEAL FAILURE OF HIGH PRESSURE AMMONIUM CARBAMATE PUMP.
2008.
265.
王威强
, 李爱菊
and 曲延鹏.
SCF快速膨胀过程流动模拟及其工艺参数的影响.
2008.
266.
王威强.
基于ANSYS Workbench和FLUENT的超临界二氧化碳萃取釜流场模拟及其结构改进.
《化工进展》,
31,
1914,
2012.
267.
王威强
, 李爱菊
and 曲延鹏.
喷嘴和结晶器结构及参数对SAS法制备超微粉体的影响.
2009.
268.
王威强.
奥氏体不锈钢换热管应力腐蚀开裂分析.
《化工机械》,
2012.
269.
李剑峰
and 王威强.
Fatigue behavior and mechanism of FV520B-I welding seams in a very high cycle regime.
International Journal of Fatigue,
87,
22,
2016.
270.
王威强
and 曲延鹏.
The structural design of nozzle in outer mixing mode for preparing superfine particles by SCF technology.
2011.
271.
王威强.
超临界流体技术制备超微粉体的新型喷嘴.
《化工机械》,
35,
374,
2008.
272.
王威强.
尿素合成塔爆炸载荷类型与破坏形态的关系分析.
山东大学学报（工学版）,
38,
51,
2008.
273.
王威强.
磁致伸缩导波技术检测管道缺陷.
《无损检测》,
30,
434,
2008.
274.
王威强.
多层包扎尿素合成塔应力状况分析.
机械强度,
30,
93,
2008.
275.
王威强.
WNN优化模型在模拟超临界二氧化碳中固体溶解度的应用.
天然气化工(C1化学与化工),
33,
75,
2008.
276.
王威强.
平阴尿塔的物料和爆炸能量估算.
山东大学学报（工学版）,
38,
46,
2008.
277.
曲延鹏
and 王威强.
新型超临界流体染色器设计.
2008.
278.
王威强.
Urea reactor integrity evaluation based on failure analysis.
Journal of Pressure Vessel Technology, Transa,
v 129,
744,
2007.
279.
王威强.
氨合成废热锅炉换热管应力腐蚀开裂分析.
《压力容器》,
25,
41,
2008.
280.
王威强.
尿素合成塔层板严重腐蚀开裂分析.
2008.
281.
王威强.
磁致伸缩导波技术在构件腐蚀检测中的应用实践.
无损探伤,
2008年卷,
18,
2008.
282.
王威强.
水溶液全循环尿素生产装置中静设备失效类型和机理研究.
2008.
283.
王威强.
疲劳概率模型的综合评价方法.
中国机械工程,
19,
2812,
2008.
284.
王威强.
平阴尿塔塔体爆炸能量分析与计算.
山东大学学报（工学版）,
38,
80,
2008.
285.
王威强.
合成氨装置风险预测控制系统的研究.
2008.
286.
王威强.
尿素合成塔物料蒸气爆炸初步研究.
2008.
287.
王威强.
锅炉汽包至上集箱间联络管爆破原因分析.
《压力容器》,
25,
33,
2008.
288.
张乐文
and 王威强.
FEM analyses of stress and deformation of a flexible inner pressure bolt.
Journal of China University of Mining and Tec,
18,
584,
2008.
289.
王威强.
Catastrophic Explosion of a Multilayered Urea Reactor.
2008.
290.
王威强.
Application of the Analytic Hierarchy Process in Risk Analysis for Urea Reactor.
2008.
291.
王威强.
尿素合成塔风险分析.
腐蚀科学与防护技术,
20,
377,
2008.
292.
王威强.
尿素合成塔层板开裂规律及原因分析.
2009.
293.
王威强.
锅炉水冷壁管腐蚀爆裂失效分析.
2013.
294.
王威强
, 孙杰
and 李剑峰.
Effect of cracked blade distribution on vibration characteristics of centrifugal impeller.
2013.
295.
王威强.
Failure analysis of spiral plate heat exchanger.
2011.
296.
李爱菊
and 王威强.
Study on the microstructure of 20 steel with strain aging.
2011.
297.
王威强.
Failure analysis of 20G boiler tubes.
2010.
298.
李爱菊
and 王威强.
避免Q245钢厚壁高压管应变时效脆化的试验研究.
2009.
299.
王威强.
Root cause analysis of stress corrosion at tube-to-tubesheet joints of a waste heat boiler.
Engineering Failure Analysis,
45,
398,
2014.
300.
王威强.
通过标准规避高压钢管应变时效脆化的发生.
《压力容器》,
27,
45,
2010.
301.
曲延鹏
and 王威强.
超临界流体喷染的原理及研究进展.
2014.
302.
王威强.
Research on the properties of 20G steel with strain aging embrittlement using indentation test.
2012.
303.
王威强.
The pressure variation of BLEVE triggered by liquid release through a crack in the cylindrical pressure vessel.
2012.
304.
王彦明
, 李爱菊
and 王威强.
Effect of fiber surface treatment techniques on properties of short carbon fiber reinforced phenol formaldehyde resin/graphite composite bipolar plate.
2011.
305.
王威强.
Preparation of ultra-fine powder using supercritical fluids: A review.
2011.
306.
李爱菊
and 王威强.
消除Q245钢应变时效脆化的理论分析及试验研究.
2009.
307.
王威强.
The stress corrosion cracking of austenitic stainless steel heat exchange tubes—three cases study.
2010.
308.
李爱菊
and 王威强.
The Fracture Failure Analysis of a Hot Pure Water Storage Container.
2015.
309.
曲延鹏
and 王威强.
Effects of austenitic stainless steel tube and tubesheet hole dimensional deviations on the hydraulic expansion pressure.
International Journal of Pressure Vessels and Piping,
138,
1,
2016.
310.
曲延鹏
and 王威强.
A Fortran implementation of isogeometric analysis for thin plate problems with the penalty method.
Engineering Computations,
33,
2149,
2016.
311.
王威强.
Using FEM to predict residual stresses in girth welding joint of layered cylindrical vessels.
International Journal of Pressure Vessels and Piping,
119,
1,
2014.
312.
李剑峰
and 王威强.
Fatigue behavior and mechanism of FV520B-I in ultrahigh cycle regime.
2014.
313.
王威强.
Residual stresses in the welding joint of the nozzle-to-head area of a layered high-pressure hydrogen storage tank.
International journal of hydrogen energy,
39,
11061,
2014.
314.
王威强.
On-Line monitoring method for centrifugal compressor and impeller remanufacturing.
2012.
315.
王威强.
Failure analysis of a bellows expansion joint of inconel625 alloy.
2012.
316.
王威强.
甲胺反应器严重开裂原因分析..
2009.
317.
李爱菊
and 王威强.
Study on the Brittle Fracture of the Q245 Steel High Pressure Piping in an Ammonia Synthesis Unit.
2009.
318.
李爱菊
and 王威强.
Analysis on layer cracking of urea reactors.
2010.
319.
李爱菊
and 王威强.
The stress distribution and critical c rack length analysis of a cracked multilayer urea reactor.
2012.
320.
曲延鹏
and 王威强.
重整氢压缩机连杆螺栓断裂失效分析.
金属热处理,
41,
200,
2016.
321.
王威强.
20(G)板不同焊接缺陷的磁记忆信号检测分析.
中国特种设备安全,
32,
33,
2016.
322.
曲延鹏
and 王威强.
基于场协同原理的管道经济管径计算新方法.
流体机械,
44,
32,
2016.
323.
王威强.
A New Method to the Elastodynamic Response of a Spherical Shell Under the Impact Load.
Journal of Pressure Vessel Technology,
138,
345011,
2016.
324.
曲延鹏
and 王威强.
Probability Analysis of Pit Initiation on Austenitic Stainless Steels.
2015.
325.
王威强.
The Measurement of Mechanical Properties of Pipe Steels in Service through Continuous Ball Indentation Test.
2015.
326.
曲延鹏
and 王威强.
Failure analysis of austenitic stainless pipes in amine liquid regeneration unit of a desulfurizer.
Engineering Failure Analysis,
57,
164,
2015.
327.
王威强.
水冷壁管开裂原因分析.
化工装备,
37,
2015.
328.
王威强.
连续球压痕法测试压力容器钢力学性能的研究.
振动.测试与诊断,
35,
281,
2015.
329.
王威强.
Failure analysis of stress corrosion cracking in heat exchanger tubes during start-up operation.
Engineering Failure Analysis,
51,
1,
2015.
330.
李剑峰
and 王威强.
Fatigue behavior and mechanism of FV520B in very high cycle regime.
Strength, Fracture and Complexity,
9,
161,
2015.
331.
王威强.
Mathematical model for tension of textile during the process of supercritical fluids spray dyeing.
2014.
332.
王威强.
法兰密封系统应力松弛有限元分析.
《压力容器》,
30,
23,
2013.
333.
王威强.
Study on the strength of textile during the process of supercritical fluids spray dyeing.
2014.
334.
王威强.
SCF preparation of drug particle using size adjustable nozzle.
2012.
335.
曲延鹏
, 陈颂英
and 王威强.
Significance analysis on influential factors of stress corrosion based on grey relational theory for stainless steels.
2012.
336.
王威强.
The feasibility of research for shell deformations with isogeometric analysis.
2012.
337.
王威强.
Failure analysis of the pure zirconium hanging sample for acetic anhydride reactor.
2012.
338.
王威强.
Numerical investigation on weld residual stresses in tube to tube sheet joint of a heat exchanger.
International Journal of Pressure Vessels and Piping,
101,
37,
2013.
339.
王威强
, 孙杰
and 李剑峰.
Effect of cracked blade distribution on strength of centrifugal impeller.
2013.
340.
王威强.
A new approach to elastodynamic response of cylindrical shell based on developed solution structure theorem for wave equation.
Journal of Pressure Vessel Technology, Transactions of the ASME,
134,
112101,
2011.
341.
王威强.
Analysis on elastoplastic stress distribution in a layered cylindrical vessel with interlayer gaps.
Journal of Pressure Vessel Technology, Transactions of the ASME,
134,
312061,
2012.
342.
王威强.
Solution of gas explosion load and simulation of dynamic response of multilayer structures.
2012.
343.
曲延鹏
and 王威强.
Supercritical fluid pray dyeing: A new method of dyeing and simulations of its flow field..
2011.
344.
李爱菊
and 王威强.
热处理避免和消除20钢厚壁高压管应变时效脆化实验研究.
《材料工程》,
2011年卷,
57,
2011.
345.
曲延鹏
, 管从胜
and 王威强.
管壳式固定床反应器爆炸事故分析.
《化工机械》,
37,
222,
2010.
346.
王威强.
我国特种设备事故调查与处理体制的思考.
中国特种设备安全,
2010年卷,
33,
2010.
347.
李爱菊
and 王威强.
A simplification method of defects in multilayered vessels detected by acoustic emission detection.
2009.
348.
王威强.
The exploration of strain aging embrittlement evaluation in metallic materials using indentation test.
2011.
349.
李爱菊
and 王威强.
Study on the composites of phenol formaldehyde resin/graphite reinforced by milled carbon fibers for bipolar plates.
2010.
350.
王威强.
Grey predication of corrosion on oil atmospheric distillation equipment.
2009.
351.
曲延鹏
and 王威强.
Preparation of Cefquinome Nanoparticles by Using the Supercritical Antisolvent Process.
Journal of Nanomaterials,
2015(ID: 767945 ),
1,
2015.
352.
李爱菊
and 王威强.
Failure analysis of the brittle fracture of thick-walled 20 steel pipe in an ammonia synthesis unit.
Engineering Failure Analysis,
17,
1359,
2010.
353.
王威强.
我国高压管道标准中某些规定存在的问题与思考.
2010.
354.
王威强.
Grey decision on oil distillation tower top exchangers maintenance overhaul.
2009.
355.
李剑峰
and 王威强.
连续球压痕测定常用叶轮材料力学性能的研究.
流体机械,
43,
7,
2015.
356.
王威强.
A new approach to elastodynamic response of cylindrical shell based on generalized solution structure theorem for wave equation.
2010.
357.
王威强.
Modified formulation of layer stresses due to Internal pressure of a layered vessel with interlayer gaps.
Journal of Pressure Vessel Technology, Transa,
132,
5120101,
2010.
358.
王威强.
A Fortran implementation of isogeometric analysis with superiority in convergence and accuracy.
2015.
359.
曲延鹏
and 王威强.
超临界流体染纱器现状与新型结构.
《现代化工》,
30,
65,
2010.
360.
李爱菊
and 王威强.
The explosion reason analysis of urea reactor of Pingyin.
Engineering Failure Analysis,
16,
972,
2009.
361.
王威强.
平阴尿素合成塔起爆源处层板应力腐蚀开裂分析.
金属热处理,
34,
104,
2009.
362.
王威强.
尿素合成塔蒸汽爆炸机理及可能断裂过程分析.
2009.
363.
王威强.
尿素合成塔爆炸原因分析研究进展.
2009.
364.
王威强
, 曲延鹏
and 肖克峰.
Cefquinome Controlled Size Submicron Particles Precipitation by SEDS Process Using Annular Gap Nozzle.
Int. J. Chem. Eng.,
2017,
2017.
365.
王威强
and 李梦丽.
Study on the Microstructure and Mechanical Properties of 20 Steel Strain Aging.
PROCEEDINGS OF THE 2017 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTER (MACMC 2017),
150,
268,
2017.
366.
王威强
and 苏成功.
压痕对不锈钢材料表面残余应力的影响.
山东大学学报（工学版）,
47,
90,
2017.
367.
王威强
and Xu, Shugen.
Numerical investigation of thermo-mechanical stress in U-tube including forming effect for the SCC failure analysis.
Engineering Failure Analysis,
77,
126,
2017.
368.
王威强
, 李剑峰
and 王鹏飞.
Research on Fatigue Damage of Compressor Blade Steel KMN-I Using Nonlinear Ultrasonic Testing.
Shock and vibration,
0,
2017.
369.
王威强
and 杨炎.
服役后16Mn管材应变时效的自动球压痕测试.
山东大学学报（工学版）,
47,
64,
2017.
370.
王威强
and 张泰瑞.
A unified energy release rate based model to determine the fracture toughness of ductile metals from unnotched specimens.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal,
150,
35,
2019.
371.
王成国
, 王威强
and 于美杰.
Thermal Properties of Acrylonitrile/Itaconic Acid Polymers in Oxidative and Nonoxidative Atmospheres.
Journal of applied polymer science,
116,
1207,
2010.
372.
曲延鹏
, 王威强
and 刘燕.
The structural design of nozzle in outer mixing mode for preparing superfine particles by SCF technology.
Advanced Materials research,
2011.
373.
王威强
and 李爱菊.
树脂/石墨PEMFC双极板的制备工艺与性能研究综述.
《材料导报》,
27,
87,
2013.
374.
曲延鹏
, 王威强
and 刘燕.
Non-dimensional Design Method for Pressure Vessels. .
Advanced Materials Research ,Advanced Mechanical Design,
Vols. 479-481 (2012),
1704,
2012.
375.
王威强
and 张泰瑞.
Method to determine the optimal constitutive model from spherical indentation tests.
Results in Physics,
8,
716,
2018.
376.
王威强
and 张泰瑞.
Improved methods to determine the elastic modulus and area reduction rate in spherical indentation tests.
MATERIALS TESTING,
60,
355,
2018.
377.
王威强
and 郭建章.
基于均匀设计的SFE-CO_2萃取花生油工艺.
陕西农业科学,
2018.
378.
王威强
and 郭建章.
基于均匀设计和BP神经网络的花生油SFE-CO_2萃取预测.
食品科学技术学报,
2018.
379.
王威强
and 王尚.
最小二乘法估算变压器绝缘件瑞利阻尼系数的可行性研究.
机械科学与技术,
2018.
380.
王威强
and 王尚.
电工层压木静态力学性能测试.
中南林业科技大学学报,
2018.
381.
王威强
and 张明.
余热锅炉给水泵轴瓦失效分析.
齐鲁工业大学学报,
2018.
382.
王威强
and 张泰瑞.
Determination of the proof strength and flow properties of materials from spherical indentation tests: An analytical approach based on the expanding cavity model.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN,
53,
225,
2018.
383.
王威强
and 张泰瑞.
A constitutive model independent analytical method in determining the tensile properties from incremental spherical indentation tests (ISITs).
International Journal of Mechanical Sciences,
148,
9,
2018.
384.
王威强
and 陈颂英.
Numerical simulation of dispersed phase flow in a tube considering bubbles erosion and Cl- ions concentration effects.
Advanced Materials research,
314-316,
1069,
2011.
385.
王威强
, 李剑峰
and 刘燕.
Fatigue behavior and mechanism of FV520B-I welding seams in a very high cycle regime.
International Journal of Fatigue,
87,
22,
2016.
386.
王威强
and 于美杰.
聚丙烯腈预氧丝皮芯结构的影响因素与防控措施..
《功能材料》,
41,
1019,
2010.
387.
王威强
and 张国新.
自动球压痕法估测Q235B钢的断裂韧度.
机械强度,
2018.
388.
王威强
and 牛俊男.
超临界二氧化碳喷染器中平滑式迷宫密封结构对密封性的影响.
润滑与密封,
2018.
389.
王威强
, 李剑峰
and 王鹏飞.
Fatigue behavior and mechanism of KMN in a very high cycle regime.
MATERIALS TESTING,
60,
55,
2018.
