王鑫锋
实验师
所属院部： 机械工程学院
访问次数：次
基本信息
  • 电子邮箱：
  • 入职时间：
    2021-08
  • 所在单位：
    机械工程学院
  • 职务：
    实验师
  • 学历：
    硕士研究生毕业
  • 性别：
    男
  • 毕业院校：
    山东大学
科研成果
论文

1.  丁守岭. Non-planar additive manufacturing of pre-impregnated continuous fiber reinforced composites using a three-axis printer.  Journal of Materials Research and Technology,  32,  4410-4419, 2024. 

2.  刘文波. Enhanced high temperature mechanical and oxidation behavior of direct energy deposited TiC/Inconel 718 gradient coatings.  Applied Surface Science,  680,  2025. 

3.  杨功先. Stereolithography Printing and Mechanical Properties of Polyethylene Glycol Diacrylate/Hexagonal Boron Nitride Ceramic Composites.  Advanced Engineering Materials,  26,  2024. 

4.  孙赫武. Multi-material ceramic hybrid additive manufacturing based on vat photopolymerization and material extrusion compound process.  Additive Manufacturing,  97,  2025. 

5.  邹斌. 材料体系和孔隙率梯度增强结构对3D打印氧化铝多孔陶瓷的性能影响.  航空制造技术,  68,  22-29, 2025. 

6.  丁守岭. Effect of printing design and forming thermal environment on pseudo-ductile behavior of continuous carbon/glass fibers reinforced nylon composites.  composite structures,  322,  2023. 

7.  郑钦冰. Study on the 3D-printed surface defect detection based on multi-row cyclic scanning method.  Measurement,  223,  2023. 

8.  徐子悦. Study on the hot isostatic pressing post-treatment of FDM-3D printed continuous carbon fiber reinforced composites.  Journal of manufacturing processes,  104,  205-217, 2023. 

9.  刘文波. Tailored microstructure and enhanced high temperature behavior of TiC/Inconel 718 composites through dual-gradient printing strategy in direct energy deposition.  Journal of Materials Processing Technology,  336,  2025. 

10.  周兴国. Construction of bilayer biomimetic periosteum based on SLA-3D printing for bone regeneration.  COLLOIDS AND SURFACES B,  246,  2025. 

11.  孙赫武. Advancements in multi-material additive manufacturing of advanced ceramics: A review of strategies, techniques and equipment.  Materials Chemistry and Physics,  319,  2024. 

12.  丁守岭. Layer thickness and path width setting in 3D printing of pre-impregnated continuous carbon, glass fibers and their hybrid composites.  Additive Manufacturing,  83,  2024. 

13.  陈清华. SLA-3d printed building and characteristics of GelMA/HAP biomaterials with gradient porous structure.  Journal of the Mechanical Behavior of Biomedical Materials,  155,  2024. 

14.  陈清华. 3D printing of PEGDA/bioceramic for guiding cell adhesion and migration.  SURFACES AND INTERFACES,  48,  2024. 

15.  陈伟. Research on rapid detection of cross-scale defects in surface based on deep learning.  Journal of manufacturing processes,  109,  345-358, 2024. 

16.  李淑颖. “虚实结合”的机电专业实验教学研究与探索.  创新创业理论研究与实践,  2024. 

17.  张广旭. Design, manufacturing and properties of controllable porosity of ceramic filters based on SLA-3D printing technology.  Ceramics International,  49,  1009-1019, 2022. 

18.  刘文波. Microstructure Evolution of TiC/Inconel 718 Composites Prepared by Direct Energy Deposition.  Advanced Engineering Materials,  2023. 

19.  常京京. Preparation, characterization and coloring mechanism of 3D printed colorful ZrO2 ceramics parts.  Materials Today Communications,  33,  2022. 

20.  陈伟. The defect detection of 3D-printed ceramic curved surface parts with low contrast based on deep learning.  Ceramics International,  49,  2881-2893, 2022. 

21.  庄悦希. Preparation of pre-impregnated continuous carbon fiber reinforced nylon6 filaments and the mechanical properties of 3D printed composites.  Materials Today Communications,  35,  2023. 

22.  丁守岭. Hybrid layout and additive manufacturing of continuous carbon/glass fibers reinforced composites, and its effect on mechanical properties.  composite structures,  319,  2023. 

23.  薛锴. Geometric Structures for Sialon Ceramic Solid End Mills and Its Performance in High-Speed Milling of Nickel-Based Superalloys.  coatings,  13,  2023. 

24.  张广旭. The 3D-Printed building and performance of Al2O3 ceramic filters with gradient hole density structures.  Ceramics International,  49,  31496-31508, 2023. 

25.  丁守岭. Microstructure, mechanical properties and machinability of 316L stainless steel fabricated by direct energy deposition.  国际机械科学,  243,  2023. 

26.  胡宜帆. Preparation of Mn–Zn ferrite ceramic using stereolithography 3D printing technology.  Ceramics International,  48,  6923-6932, 2021. 

27.  于洋. Rheological behavior and curing deformation of paste containing 85 wt% Al2O3 ceramic during SLA-3D printing.  Ceramics International,  2022. 

28.  杨金照. A study on the roughness detection for machined surface covered with chips based on deep learning.  Journal of manufacturing processes,  84,  77-87, 2022. 

专利

1. 基于增减材复合制造液压集成块的流道设计优化方法

2. 一种流道结构增减材复合制造工艺规划方法及系统

版权所有   ©山东大学　地址：中国山东省济南市山大南路27号　邮编：250100　
查号台：（86）-0531-88395114
值班电话：（86）-0531-88364731　建设维护：山东大学信息化工作办公室