于慧
+
Gender:Female
Paper Publications
- [91] gaobaoyu , yuhui and yueqinyan. Optimization of high surface area activated carbon production from Enteromorpha prolifra with low-dose activating agent. Fuel Processing Technology, 2015.
- [92] yueqinyan , gaobaoyu , yuhui and 张经祯. The study of Na2SiO3 as conditioner used to deep dewater the urban sewage dewatered sludge by filter press. SEPARATION AND PURIFICATION TECHNOLOGY, 174, 331, 2017.
- [93] xushiping , gaobaoyu , Li Qian , yuhui and yueqinyan. Preparation and evaluation of adsorptive properties. chemical engineering journal, 2015.
- [94] Min Yue , gaobaoyu , yuhui and yueqinyan. Preparation and mechanism of ultra-lightweight ceramics produced from sewage sludge. Journal of Hazardous Materials, 176, 76, 2010.
- [95] Li Qian , gaobaoyu , yuhui and yueqinyan. Influence of sintering temperature on orthophosphate and pyrophosphate removal behaviors of red mud granular adsorbents (RMGA). Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2012.
- [96] Min Yue , gaobaoyu , Li Qian , yuhui and yueqinyan. The performance of biological anaerobic packed with sludge-fly ash ceramic particles (SFCP) and commercial ceramic particles (CCP) during the restart period: Effect of the C/N ratios and filter media. Bioresource technology, 100, 5016, 2009.
- [97] gaobaoyu , Min Yue , Li Qian , yuhui and yueqinyan. The characteristics and application of sludge-fly ash ceramic particles (SFCP) as novel filter media. Journal of Hazardous Materials, 171, 809, 2009.
- [98] Li Qian , gaobaoyu , yuhui and yueqinyan. Characterization of red mud granular adsorbent (RMGA) and its performance on phosphate removal from aqueous solution. chemical engineering journal, 2012.
- [99] yueqinyan , gaobaoyu , yuhui and Min Yue. Properties and sintering mechanism of lightweight sludge-flyash-clay ceramics. . Advanced Materials research, 383-390, 3346, 2011.
- [100] gaobaoyu , yuhui and yueqinyan. Preparation and mechanism of the sintered bricks produced from Yellow River silt and red mud. Journal of Hazardous Materials, 2012.