张存生山东大学主页平台管理系统--中文主页

+

个人信息

张存生

(教授)

教师姓名：张存生
教师拼音名称：zhangcunsheng
入职时间：2008-11-17
所在单位：材料科学与工程学院
性别：男
职称：教授
在职信息：在职

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

[177] 赵国群 and 张存生. Numerical and Experimental Investigation on Thermo-mechanical Behavior during Transient Extrusion Process of High-strength 7××× Aluminum Alloy Profile. international Journal of Advanced Manufacturing Technology, 85, 1915, 2016.
[178] 赵国群 and 张存生. Optimization of porthole extrusion dies with the developed algorithm based on finite volume method. international Journal of Advanced Manufacturing Technology, 85, 1901, 2016.
[179] 赵国群 and 张存生. Constitutive equations and flow behavior of an as-extruded AZ31 magnesium alloy under large strain condition. Journal of Materials Engineering and Performance, 25, 2267, 2016.
[180] 赵国群 , 管延锦 and 张存生. Constitutive equation and processing maps of an Al-Mg-Si aluminum alloy: determination and application in simulating extrusion process of complex profiles. Materials and design, 92, 983, 2016.
[181] 赵国群 , 管延锦 , 陈良 and 张存生. State-of-the-art of extrusion welding and proposal of a method to evaluate quantitatively welding quality during three-dimensional extrusion process. Materials and design, 89, 737, 2016.
[182] 赵国群 and 张存生. Identification of friction coefficients and strain-compensated？Arrhenius-type constitutive model by two-stage inverse analysis technique. International Journal of Mechanical Sciences, 98, 195, 2015.
[183] 赵国群 and 张存生. Investigation of the influence of the initial groove angle in the M-K model on limit strains and forming limit curves. International Journal of Mechanical Sciences, 98, 59, 2015.
[184] 赵国群 , 管延锦 and 张存生. Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections. international Journal of Advanced Manufacturing Technology, 78, 927, 2015.
[185] 赵国群 and 张存生. Dedicated linear-Voce model and its application in investigating temperature and strain rate effects on sheet formability of aluminum alloys. Materials and design, 67, 522, 2015.
[186] 赵国群 and 张存生. Effects of temperature and strain rate on the forming limit curves of AA5086 sheet. Procedia Engineering, 81, 772, 2014.
[187] 赵国群 , 管延锦 and 张存生. Numerical and experimental research on extrusion process of a three-cavity aluminum profile. AIP Proceeding paper, 2013.
[188] 赵国群 , 管延锦 and 张存生. Investigation on effects of die orifice layout on three-hole porthole extrusion of aluminum alloy 6063 tubes. Journal of Materials Engineering and Performance, 22, 1223, 2013.
[189] 赵国群 , 管延锦 and 张存生. An investigation of die wear behavior during aluminum alloy 7075 tube extrusion. Journal of Tribology, 135, 2013.
[190] 赵国群 and 张存生. Effect of extrusion stem speed on extrusion process for a hollow aluminum profile. Materials Science and Engineering B, 177, 1691, 2012.
[191] 赵国群 , 管延锦 and 张存生. Optimization of an aluminum profile extrusion process based on Taguchi’s method with S/N analysis. international Journal of Advanced Manufacturing Technology, 60, 589, 2012.
[192] 张存生. Effects of a strain rate sensitive material on the optimization of an hydroforming process. International Journal of Material Forming, 335, 2008.

共200条 12/13

首页上页下页尾页页