张存生山东大学主页平台管理系统--中文主页

+

个人信息

张存生

(教授)

教师姓名：张存生
教师拼音名称：zhangcunsheng
入职时间：2008-11-17
所在单位：材料科学与工程学院
性别：男
职称：教授
在职信息：在职

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

[17] 唐建伟. Evolution mechanisms of charge weld during porthole die extrusion of ZK60 Mg profile. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Journal, 300, 2022.
[18] 李志刚. Strengthening mechanism and anisotropy of mechanical properties of Si(3)N(4)p/Al-Mg-Si composites fabricated by sintering and extrusion. materials and design, 210, 2021.
[19] 王永晓. Microstructure evolution of spray deposited and as-cast 2195 Al-Li alloys during homogenization. Journal of Materials Science and Technology, 82, 161, 2021.
[20] 路丽丽. 辅导员担任“形势与政策”课程教师胜任力研究. 科教导刊, 2020.
[21] 崔帅. Precipitation behavior of an Al & ndash;Cu & ndash;Li & ndash;X alloy and competing relationships among precipitates at different aging temperatures. PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 814, 2021.
[22] 王永晓. Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al-Cu-Li alloy 2195. Journal of Materials Research and Technology, 8, 3891, 2019.
[23] 李志刚. Improving mechanical anisotropy and corrosion resistance of extruded AA7075 alloy by warm cross rolling and annealing. JOURNAL OF ALLOYS AND COMPOUNDS , 863, 2021.
[24] 程乾. A comprehensive analysis on microstructure evolution of Mg-5.65Zn-0.66Zr alloy during hot deformation. JOURNAL OF MAGNESIUM AND ALLOYS, 9, 520, 2021.
[25] 唐建伟. Formation of abnormal coarse grains and its effects on corrosion behaviors of solution treated ZK60 Mg alloy. CORROSION SCIENCE, 180, 2021.
[26] 张树刚. Investigation on microstructure and mechanical properties of in-situ TiB2/Al-Cu-Mg composite profile fabricated by porthole die extrusion. PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 786, 2020.
[27] 李志刚. Microstructure evolution, plastic anisotropy, and intergranular corrosion of Al-Mg-Si sheet processed through a combination of hot extrusion and cold rolling. MATERIALS CHARACTERIZATION Journal, 164, 2020.
[28] 唐建伟. Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die. Journal of Materials Science and Technology, 47, 88, 2020.
[29] 陈良. Influence of homogenization treatment on microstructure and mechanical properties of Al-Zn-Mg alloy extruded by porthole die. MATERIALS CHARACTERIZATION Journal, 161, 2020.
[30] 侯玉柱. Effects of artificial aging on microstructure, mechanical properties and stress corrosion cracking of a novel high strength 7A99 Al alloy. PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 780, 2020.
[31] 唐建伟. Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties. PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 773, 2020.
[32] 李硕硕. Improvement in mechanical properties of Al-Zn-Mg alloy by applying electric pulse during hot extrusion. Journal of Materials Research and Technology, 9, 1210, 2020.

共187条 2/12

首页上页下页尾页页