张存生山东大学主页平台管理系统--中文主页

+

个人信息

张存生

(教授)

教师姓名：张存生
教师拼音名称：zhangcunsheng
入职时间：2008-11-17
所在单位：材料科学与工程学院
性别：男
职称：教授
在职信息：在职

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

[49] 侯玉柱. Effects of artificial aging on microstructure, mechanical properties and stress corrosion cracking of a novel high strength 7A99 Al alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 780, 139217, 2020.
[50] 陈良. Multi-objective optimization and experimental investigation on hot extruded plate of high strength Al-Zn-Mg alloy. Journal of Materials Research and Technology, 9, 507, 2020.
[51] 李硕硕. Improvement in mechanical properties of Al-Zn-Mg alloy by applying electric pulse during hot extrusion. journal of materials research and technology, 9, 1210, 2020.
[52] 陈良. Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al-Zn-Mg alloy. MATERIALS CHARACTERIZATION Journal, 158, 2019.
[53] 唐建伟. Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 47, 88, 2020.
[54] 陈良. Influence of homogenization treatment on microstructure and mechanical properties of Al-Zn-Mg alloy extruded by porthole die. Materials Characterization, 161, 110148, 2020.
[55] 秦国梁 and 张存生. Formability behavior of Al/steel MIG arc brazed-fusion welded joint. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Journal, 273, 2019.
[56] 张存生 , 赵国群 and 陈良. Influence of extrusion parameters on microstructure, texture, and second-phase particles in an Al-Mg-Si alloy. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Journal, 2019.
[57] 张存生 , 王广春 , 赵国群 and 陈良. The integration of through-thickness normal stress and friction stress in the M-K model to improve the accuracy of predicted FLCs. INTERNATIONAL JOURNAL OF PLASTICITY, 2019.
[58] 赵国群 , 张存生 , 陈良 , 孙璐 and 陆星. Microstructure, mechanical properties and welding quality evaluation of longitudinal welds in hollow magnesium alloy profiles extruded at different ram speeds. MATERIALS CHARACTERIZATION Journal, 151, 414, 2019.
[59] 赵国群 , 张存生 and 王永晓. Constitutive modeling, processing map establishment and microstructure analysis of spray deposited Al-Cu-Li alloy 2195. JOURNAL OF ALLOYS AND COMPOUNDS , 779, 735, 2019.
[60] 张存生 , 赵国群 , 陈良 and 王协彬. Investigation of dynamic recrystallization and modeling of microstructure evolution of an Al-Mg-Si aluminum alloy during high-temperature deformation. JOURNAL OF ALLOYS AND COMPOUNDS , 773, 59, 2019.
[61] 张存生 and 赵国群. Automatic optimization design of a feeder extrusion die with response surface methodology and mesh deformation technique. international Journal of Advanced Manufacturing Technology, 91, 3181, 2017.
[62] 张存生 , 赵国群 and 陈良. Evolution of transverse weld during porthole extrusion of AA7N01 hollow profile. Journal of Materials Processing Technology, 248, 103, 2017.
[63] 张存生 , 林军 , 赵国群 , 陈良 and 张庆友. Microstructure analysis and low-cycle fatigue behavior of spray-formed Al-Li alloy 2195 extruded plate. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 742, 773, 2019.
[64] 张存生 , 赵国群 and 陈良. Application and analysis of spread die and flat container in the extrusion of a large-size, hollow and flat-wide aluminum alloy profile. International Journal of Advanced Manufacturing Technology, 94, 4247, 2018.

共187条 4/12

首页上页下页尾页页