张存生山东大学主页平台管理系统--中文主页

+

个人信息

张存生

(教授)

教师姓名：张存生
教师拼音名称：zhangcunsheng
入职时间：2008-11-17
所在单位：材料科学与工程学院
性别：男
职称：教授
在职信息：在职

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

[129] 张存生 and 赵国群. 阻流块对薄壁空心铝型材挤压过程材料流速的影响. 机械工程学报, 48, 52, 2012.
[130] 张存生 , 赵国群 and 管延锦. Design of a Multihole Porthole Die for Aluminum Tube Extrusion. Materials and Manufacturing Processes, 27, 147, 2012.
[131] 张存生 and 赵国群. Effects of multi-step welding chamber on extrusion product quality and die strength. Applied mechanics and materials, 44-47, 311, 2011.
[132] 张存生 and 赵国群. Numerical simulation of extrusion process and die structure optimization for a complex aluminum multicavity wallboard of high-speed train. Materials and Manufacturing Processes, 25, 1530, 2011.
[133] 张存生 , 管延锦 and 赵国群. Optimal design of second-step welding chamber for a condenser tube extrusion die based on response surface method and genetic algorithm. Materials and Manufacturing Process, 2013.
[134] 张存生 , 管延锦 and 赵国群. Effect of process parameters on die wear behavior of aluminum alloy rod extrusion. Materials and Manufacturing Process, 2013.
[135] 张存生 and 赵国群. 多腔壁板铝型材挤压过程数值模拟及模具优化. 机械工程学报, 47, 61, 2011.
[136] 张存生 and 赵国群. 薄壁空心铝型材挤压过程数值模拟及模具优化. 机械工程学报, 46, 34, 2010.
[137] 张存生 and 赵国群. Effects of welding chamber step on extrusion process of a complex hollow profile. Advanced Materials research, 148-149, 1684, 2011.
[138] 张存生 , 管延锦 and 赵国群. Multi-objective optimization design of porthole extrusion die using Pareto-based genetic algorithm. international Journal of Advanced Manufacturing Technology, 2013.
[139] 陈良 , 赵国群 , 张存生 and 唐建伟. Study on Al/Mg/Al sheet fabricated by combination of porthole die co-extrusion and subsequent hot rolling. JOURNAL OF ALLOYS AND COMPOUNDS Journal, 784, 727, 2019.
[140] 陈良 , 赵国群 , 张存生 and 袁盛伟. Correlation between homogenization treatment and subsequent hot extrusion of Al-Mg-Si alloy. ADVANCES IN WEB-AGE INFORMATION MANAGEMENT, PROCEEDINGS, 54, 9843, 2019.
[141] 林军 , 管延锦 , 高夫征 , 张存生 , 陈良 and 富芳艳. Moving least squares particle hydrodynamics method for Burgers' equation. Applied Mathematics and Computation (New York), 356, 362, 2019.
[142] 赵国群 , 陈良 and 张存生. Application and analysis of spread die and flat container in the extrusion of a large-size, hollow and flat-wide aluminum alloy profile. International Journal of Advanced Manufacturing Technology, 94, 4247, 2018.
[143] 赵国群 , 张存生 and 陈良. Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 718, 390, 2018.
[144] 陈良 , 赵国群 , 张存生 and 李玉强. Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion. JOURNAL OF ALLOYS AND COMPOUNDS, 749, 293, 2018.

共187条 9/12

首页上页下页尾页页