张井志Zhang Jingzhi

(副教授)

 硕士生导师
教师姓名:张井志
教师英文名称:Zhang Jingzhi
教师拼音名称:zhang jing zhi
电子邮箱:zhangjz@sdu.edu.cn
入职时间:2017-04-12
所在单位:能源与动力工程学院
学历:研究生(博士)毕业
办公地点:山东大学千佛山校区热力楼202
性别:男
联系方式:18769766616
学位:博士
职称:副教授
在职信息:在职
毕业院校:浙江大学
是否在职:1
学科:工程热物理

通讯/办公地址:山东省济南市经十路17923号山东大学千佛山校区热力楼202

移动电话:18769766616

邮箱:zhangjz@sdu.edu.cn

个人简介

张井志,男,1989年8月生,中共党员,博士,副教授,硕士生导师,入选“山东大学青年学者未来计划”。2006年9月-2017年3月先后于山东大学、浙江大学获得学士、硕士、博士学位。2017年4月至2020年9月担任山东大学能源与动力工程学院助理研究员,2020年9月至今担任副教授2019年9月-2020年9月以访问学者的身份赴瑞典隆德大学(Lund University)能源科学系从事微细通道多相流动研究。发表论文50余篇,其中SCI收录21篇,EI收录13篇,论文被引用200余次。目前主持山东省重点研发计划1项、山东省自然科学基金项目1项、广东省自然科学基金青年项目1项、中国博士后科学基金面上项目1项、山东省博士后创新项目1项、中央高校基本科研业务费资助项目1项。

研究定位于能源、化工、微电子领域的流动传热问题,主要采用数值模拟及实验的方法,研究常规及微细通道内单相/多相流动与传热耦合机理和流型调控及强化传热技术,包括:

1)工业新型换热器内多相流动换热机理及强化技术;

2)多尺度耦合换热元件内部相变传热机理及流型调控;

3)高效化工、医药微反应器开发及微流控技术;

4)  高热流密度/高功率器件热管理技术。

ORCID  https://orcid.org/0000-0001-5672-8349

Researchgate  https://www.researchgate.net/profile/Jingzhi_Zhang4

Scopus  https://www.scopus.com/authid/detail.uri?origin=resultslist&authorId=55617643700


科研项目

[1]  国家自然科学基金联合基金重点支持项目子课题,U20A20300-3,面向氧化镓微波大功率器件的新一代高效热管理系统关键基础问题研究,2021.01-2024.12,主持。

[2]  山东省重点研发计划(公益性科技攻关类),新型三维复合波纹板式换热器研发及其强化相变传热传质机理研究 ,2019.01-2021.12,主持。

[3]  山东省自然科学基金博士基金项目,小管径内螺纹管内冷凝流动特性及强化传热机理研究,2018.03-2020.12,主持。 

[4]  广东省基础与应用基础研究基金(青年基金项目),基于虚拟双目系统的螺纹管内制冷剂流动沸腾三维流型重构及传热传质机理研究,2020.01-2022.12,主持。

[5]   中国博士后科学基金面上资助项目,内螺纹管内冷凝流型特征及传热传质机理研究,2018.11-2020.10,主持。

[6]   山东省博士后创新项目,基于虚拟双目系统的强化通道内冷凝流型三维重构及传热传质机理研究,2019.11-2021.10,主持。

[7]   山东大学青年学者未来计划,微尺度多相流动传热传质,2020.09-2025.08,主持。

[8]   山东大学基本科研业务费项目,内螺纹管内汽液两相流动的流型及换热特性研究,2017.09-2019.12,主持。


发表论文

2021

[6] Changliang Wang, Maocheng Tian*, Jingzhi Zhang, Guanmin Zhang, Experimental study on liquid–liquid two-phase flow patterns and plug hydrodynamics in a small channel, Experimental Thermal and Fluid Science. 129 (2021) 110455.

[5] Shizhen Li, Yingxin Liu, Yanjun Liu,  Jingzhi Zhang*, Performance comparison of ejectors in ejector-based refrigeration cycles with R1234yf, R1234ze(E) and R134a, Environmental Science and Pollution Research. Accepted and In Proof. 

[4] 张井志梁福顺, 黄楠燕, 程成雷丽*小管径圆管气-液界面可视化及含气率高校化学工程学报, 35(02) (2021) 236-242.

[3] Shizhen Li, Xiaoyu Zhai, Yanjun Liu, Weimin Liu, Lei Wang, Jingzhi Zhang*, Effects of working conditions on the performance of an ammonia ejector used in an ocean thermal energy conversion system, The Canadian Journal of Chemical Engineering. Accepted. https://doi.org/10.1002/cjce.24038

[2] Li Lei, Yuting Zhao, Wukai Chen, Huiling Li, Xinyu Wang, Jingzhi Zhang*, Experimental Studies of Droplet Formation Process and Length for Liquid–Liquid Two-Phase Flows in a Microchannel, Energies, 14(5) (2021) 1341.

[1] Wenyang Ding, Dan Han, Jingzhi Zhang, Qingming Ma, Xiaoyan Li, Jingchao Zhang, Xinyu Wang, Molecular dynamics study of anisotropic behaviours of water droplet on textured surfaces with various energies, Molecular Physics, 119(3) (2021) e1785028.

 

2020

[16] Jingzhi Zhang, Xiaoyu Zhai, Shizhen Li, Numerical studies on the performance of ammonia ejectors used in ocean thermal energy conversion system, Renewable Energy, 161 (2020) 766-776.

[15] Jingzhi Zhang, Nanyan Huang, Li Lei, Fushun Liang, Xinyu Wang, Zan Wu, Studies of gas-liquid two-phase flows in horizontal mini tubes using 3D reconstruction and numerical methods, International Journal of Multiphase Flow, 133 (2020) 103456.

[14] Jingzhi Zhang, Shizhen Li, Xinyu Wang, Bengt Sundén, Zan Wu, Numerical studies of gas-liquid Taylor flows in vertical capillaries using CuO/water nanofluids, International Communications in Heat and Mass Transfer, 116 (2020) 104665.

[13] Jingzhi Zhang, Li Lei, Fushun Liang, Huiling Li, Bengt Sundén, Zan Wu, An improved method to visualize two regions of interest synchronously in microfluidics, Flow Measurement and Instrumentation, 72 (2020) 101715.

[12] Shizhen Li, Wei Li, Yanjun Liu, Chen Ji, Jingzhi Zhang*, Experimental Investigation of the Performance and Spray Characteristics of a Supersonic Two-Phase Flow Ejector with Different Structures, Energies, 13(5) (2020) 1166.

[11] 张井志*, 周乃香, 张冠敏, 田茂诚, 微细圆管及扁平管内液-Taylor流动特性的数值研究, 化工学报, 71(S2) (2020) 70-79.

[10] 张井志*, 陈武铠, 周乃香, 雷丽, 梁福顺, T型微通道内液滴形成过程及长度的实验研究, 浙江大学学报(工学版), 54(5) (2020) 1007-1013.

[9] Yang Luo, Wei Li, Jingzhi Zhang, W. J. Minkowycz, Analysis of thermal performance and pressure loss of subcooled flow boiling in manifold microchannel heat sink, International Journal of Heat and Mass Transfer, 162 (2020) 120362.

[8] Lili Zhang, Guanmin Zhang, Yi Zhang, Maocheng Tian, Jingzhi Zhang, A 2D numerical study on the condensation characteristics of three non-azeotropic binary hydrocarbon vapor mixtures on a vertical plate, Chinese Journal of Chemical Engineering, 28(11) (2020) 2746-2757.

[7] 雷丽, 李慧玲, 赵玉婷, 周乃香, 张井志*, 凹穴型微通道液-液两相流动特性, 高校化学工程学报, 34(06) (2020) 1360-1367.

[6] Hongzhao Fan, Man Wang, Dan Han, Jingzhi Zhang, Jingchao Zhang, Xinyu Wang, Enhancement of Interfacial Thermal Transport between Metal and Organic Semiconductor Using Self-Assembled Monolayers with Different Terminal Groups, The Journal of Physical Chemistry C, 124(31) (2020) 16748-16757.

[5] Yang Luo, Jingzhi Zhang, Wei Li, A comparative numerical study on two-phase boiling fluid flow and heat transfer in the microchannel heat sink with different manifold arrangements, International Journal of Heat and Mass Transfer, 156 (2020) 119864.

[4] Changliang Wang, Maocheng Tian, Jingzhi Zhang, Guanmin Zhang, Yi Zhang, Numerical study on pressure drop and heat transfer characteristics of gas-liquid Taylor flow in a microchannel based on FFR method, International Communications in Heat and Mass Transfer, 117 (2020) 104802.

[3] Lili Zhang, Guanmin Zhang, Wenlong Mao, Yi Zhang, Jingzhi Zhang, Experimental and numerical study on filmwise condensation of pure propane and propane/methane mixture, International Journal of Heat and Mass Transfer, 156 (2020) 119744.

[2] 李蔚, 骆洋, 张井志, 歧管式微通道热沉中过冷流动沸腾的数值模拟,科学通报,65(17) (2020) 1752-1759.

[1] Haiyi Sun, Zhike Liu, Gongming Xin, Qian Xin, Jingzhi Zhang, Bingyang Cao, Xinyu Wang, Thermal and flow characterization in nanochannels with tunable surface wettability: A comprehensive molecular dynamics study, Numerical Heat Transfer, Part A: Applications, 78(6) (2020) 231-251.

 

2019

[4] Xianbing Chen, Maocheng Tian, Guanmin Zhang, Xueli Leng, Yan Qiu, Jingzhi Zhang, Visualization study on direct contact condensation characteristics of sonic steam jet in subcooled water flow in a restricted channel, International Journal of Heat and Mass Transfer, 145 (2019) 118761.

[3] Yang Luo, Junye Li, Kan Zhou, Jingzhi Zhang, Wei Li, A numerical study of subcooled flow boiling in a manifold microchannel heat sink with varying inlet-to-outlet width ratio, International Journal of Heat and Mass Transfer, 139 (2019) 554-563.

[2] Xinyu Wang, Dan Han, Yang Hong, Haiyi Sun, Jingzhi Zhang, Jingchao Zhang, Machine Learning Enabled Prediction of Mechanical Properties of Tungsten Disulfide Monolayer, ACS Omega, 4(6) (2019) 10121-10128.

[1] Lili Zhang, Guanmin Zhang, Maocheng Tian, Jingzhi Zhang, Yi Zhang, Modeling of laminar filmwise condensation of methane with nitrogen on an isothermal vertical plate, International Communications in Heat and Mass Transfer, 105 (2019) 10-18.

 

2018

[5] Jingzhi Zhang, Naixiang Zhou, Wei Li, Yang Luo, Shizhen Li, An experimental study of R410A condensation heat transfer and pressure drops characteristics in microfin and smooth tubes with 5 mm OD, International Journal of Heat and Mass Transfer, 125 (2018) 1284-1295.

[4] Jingzhi Zhang, Wei Li, Thermal and Flow Characteristics of Water–Nitrogen Taylor Flow Inside Vertical Circular Tubes, Journal of Heat Transfer, 140(8) (2018).

[3] Jingzhi Zhang, Jinpin Lin, Dan Huang, Wei Li, Numerical study of heat transfer characteristics of downward supercritical kerosene flow inside circular tubes, Journal of Zhejiang University-SCIENCE A, 19(2) (2018) 158-170.

[2] Wei Li, Yang Luo, Jingzhi Zhang, W. J. Minkowycz, Simulation of Single Bubble Evaporation in a Microchannel in Zero Gravity With Thermocapillary Effect, Journal of Heat Transfer, 140(11) (2018).

[1] Xiaoxu Ma, Maocheng Tian, Jingzhi Zhang, Liangliang Tang, Furen Liu, Flow pattern identification for two-phase flow in a U-bend and its contiguous straight tubes, Experimental Thermal and Fluid Science, 93 (2018) 218-234.

 

2017年以前

[13] Yang Luo, Jingzhi Zhang, Wei Li, Ekaterina Sokolova, Yourong Li, W. J. Minkowycz, Numerical investigation of the bubble growth in horizontal rectangular microchannels, Numerical Heat Transfer, Part A: Applications, 71(12) (2017) 1175-1188.

[12] Wei Li, Jingzhi Zhang, Pengfei Mi, Jianfu Zhao, Zhi Tao, Peter R. N. Childs, Tom I. P. Shih, The effect of gravity on R410A condensing flow in horizontal circular tubes, Numerical Heat Transfer, Part A: Applications, 71(3) (2017) 327-340.

[11] Wei Li, Jingzhi Zhang, Guanghui Bai, Jin-liang Xu, Terrence W. Simon, Junye Li, Jin-jia Wei, Numerical Simulation of Condensation for R410A in Horizontal Round and Flattened Minichannels, Journal of Heat Transfer, 139(2) (2016).

[10] Jingzhi Zhang, David F. Fletcher, Wei Li, Heat transfer and pressure drop characteristics of gas–liquid Taylor flow in mini ducts of square and rectangular cross-sections, International Journal of Heat and Mass Transfer, 103 (2016) 45-56.

[9] Jingzhi Zhang, Wei Li, W. J. Minkowycz, Numerical simulation of condensation for R410A at a different saturation temperature in mini/micro tubes, Numerical Heat Transfer, Part A: Applications, 69(8) (2016) 825-840.

[8] Jingzhi Zhang, Wei Li, Investigation of hydrodynamic and heat transfer characteristics of gas–liquid Taylor flow in vertical capillaries, International Communications in Heat and Mass Transfer, 74 (2016) 1-10.

[7] Jingzhi Zhang, Wei Li, S. A. Sherif, A numerical study of condensation heat transfer and pressure drop in horizontal round and flattened minichannels, International Journal of Thermal Sciences, 106 (2016) 80-93.

[6] Jingzhi Zhang, Wei Li, Numerical study on heat transfer and pressure drop characteristics of R410A condensation in horizontal circular mini/micro-tubes, The Canadian Journal of Chemical Engineering, 94(9) (2016) 1809-1819.

[5] 张井志, 李蔚, 水平圆形与方形微小通道内R134a冷凝数值模拟, 化工学报, 67(5) (2016) 1748-1754.

[4] 张井志, 李蔚, 毛细管内气液Taylor流动的气泡及阻力特性, 化工学报, 66(3) (2015) 942-948.

[3] 张井志, 李蔚, 微小管径圆管气-Taylor流动数值模拟, 浙江大学学报(工学版), 49(8) (2015) 1572-1577+1584.

[2] 张井志, 田茂诚, 张冠敏, 李蔚, 马连湘, 冷学礼, 倾角不同波纹板片组合板式换热器流动换热分析, 工程热物理学报, 35(07) (2014) 1369-1373.

[1] 张井志, 张文强, 田茂诚, 冷学礼, 管束旋转时管外流体对流换热特性, 工程热物理学报, 34(2) (2013) 314-316.

 


 



教育经历

[1] 2019.9-2020.9
隆德大学 | 能源科学系 | 访问学者 | 访问学者
[2] 2013.9-2017.3
浙江大学 | 热能工程 | 工学博士学位
[3] 2010.9-2013.6
山东大学 | 工程热物理 | 工学硕士学位
[4] 2006.9-2010.6
山东大学 | 能源与动力工程 | 工学学士学位

工作经历

[1] 2020.9-至今
 山东大学能源与动力工程学院 
[2] 2019.9-2020.9
 隆德大学能源科学系 
[3] 2017.4-2020.9
 山东大学能源与动力工程学院 

研究方向

暂无内容

团队成员

暂无内容