- [81] 张勤河 , 张建华 and 杜连明. Research of PZT Excited Discharge Channel Compression Micro-EDM Techniques. Advanced Materials research, Vol. 645 , 363, 2013.
- [82] 刘文平 and 张勤河. Impact Analysis of Microstructure Evolution in Hot Rolling of H-beams. Advanced Materials research, 652, 2024, 2013.
- [83] 张勤河 , 张建华 and 白雪. Powder mixed near dry electrical discharge machining. Advanced Materials research, 500, 253, 2012.
- [84] 张勤河 and 董宝田. FEM Analysis of Large H-beam in Rough Rolling Process. Materials Science Forum, 2011.
- [85] 张勤河 , 张建华 and 杜连明. EWR research on PZT excited discharge channel compression micro-EDM. Advanced Materials research, Vol. 900 , 578, 2014.
- [86] 张勤河 , 张建华 and 刘庆玉. Influence of Grain Size and Grain Boundary of workpieceon Micro EDM. Advanced Materials research, Vols. 941-944 , 2116, 2014.
- [87] 张勤河 , 张建华 and 张亚. 压电自适应微细电火花加工控制及电极补偿. 第15届全国特种加工学术会议论文集(上), 2013.
- [88] 张勤河 , 张建华 and 杜连明. 基于PZT激励同步压缩放电通道的微细电火花加工技术. 机械工程学报, Vol.49, 184, 2013.
- [89] 张勤河 , 张建华 and 白雪. Machining Efficiency of Powder Mixed Near Dry Electrical Discharge Machining Based on Different M.... Journal of manufacturing processes, Vol.15 , 474, 2013.
- [90] 张勤河 , 张建华 and 高清. 汽中电火花加工技术研究. 中国机械工程, Vol.19, 2633, 2008.
- [91] 张勤河 and 张建华. 超声辅助气中电火花铣削加工研究. 中国机械工程, Vol.19, 2227, 2008.
- [92] 张勤河 型钢热轧开坯过程金属变形分析. 塑性工程学报, Vol.14, 115, 2007.
- [93] 张勤河 and 王培起. 基于ABAQUS的大型H型钢热轧仿真系统开发. 锻压技术, 37, 167, 2012.
- [94] 张勤河 , 高立营 基于单元刀具切削的活检针切削力模型. 医用生物力学, 27, 77, 2012.
- [95] 张勤河 and 张亚. Research on Piezoelectric Self-adaptive micro-EDM CNC System. Advanced Materials Research, 2012.
- [96] 张勤河 and Moore, Jason Z.. Modeling Cutting Edge Geometry for Plane and Curved Needle Tips. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 5, 861, 2012.
- [97] 张勤河 and 张亚. 基于VC的压电自适应微细电火花加工软件研究. 《电加工与模具》, 29, 2012.
- [98] 张勤河 and 白雪. 混粉准干式电火花加工介质击穿机理研究. 机械工程学报, 48, 186, 2012.
- [99] 张勤河 and 董宝田. 大型H型钢开坯轧制中的弹性轧辊仿真分析. 锻压技术, 37, No.2, Apr. 2012, pp-, 71, 2012.
- [100] 张勤河 and Jason Z. Moore. Modeling of the Plane Needle Cutting Edge Rake and Inclination Angles for Biopsy. Transactions of the ASME(Journal of Manufacturing Science and Engineering, 132, 2010.