|
个人信息Personal Information
副教授 硕士生导师
性别：女
在职信息：在职
所在单位：材料科学与工程学院
入职时间：2012-11-08
办公地点：主楼226
扫描关注
- [21] 常丽丽. Influence of strain path on the microstructure evolution and mechanical properties in AM31 magnesium alloy sheets processed by differential speed rolling. Materials and design, 44, 144, 2013.
- [22] 常丽丽. Microstructure and mechanical properties of AM31 magnesium alloys processed by differential speed rolling . Journal of Materials Processing Technology, 211, 1527, 2011.
- [23] 常丽丽 and 赵亚茹. Twinning behavior of hot extruded AZ31 hexagonal prisms during uniaxial compression. JOURNAL OF MAGNESIUM AND ALLOYS, 7, 90, 2019.
- [24] 常丽丽 and 郭晶. Effect of Sn and Y addition on the microstructural evolution and mechanical properties of hot-extruded Mg-9Li-3Al alloy. MATERIALS CHARACTERIZATION Journal, 148, 35, 2019.
- [25] 常丽丽. Influence of twin roll casting and differential speed rolling on microstructure and tensile properties in magnesium alloy sheets. Procedia Engineering, 2011.
- [26] 常丽丽 and 李胜利. 铜银合金导线的微观组织与性能研究 . 《中国有色金属学报》, 2015.
- [27] 常丽丽 and 李胜利. 铜银合金导线的微观组织与性能研究 . 《中国有色金属学报》, 2015.
- [28] 常丽丽. Stress Induced Martensitic Transformation in Ti-1023 Alloys. Materials science forum, 2016.
- [29] 常丽丽. Tension-compression Asymmetry in an Extruded Mg alloy AZ31: Texture and Strain Rate Effects. Materials science forum, 2016.
- [30] 李胜利 and 常丽丽. 铜银合金导线的显微组织与性能. 《中国有色金属学报》, 1655, 2015.
- [31] 李胜利 , 朱新德 and 常丽丽. Strain softening during tension in cold drawn Cu–Ag alloys. Materials Characterization, 108, 145, 2015.
- [32] 常丽丽. In-situ investigation of stress-induced martensitic transformation in Ti–Nb binary alloys with low Young's modulus. Materials Science and Engineering: A, 651, 442, 2016.
- [33] 常丽丽. Deep drawing of AM31 alloys. Materials science forum, 2010.
- [34] 常丽丽. Influence of twin roll casting and differential speed rolling on microstructure and tensile properties in magnesium alloy sheets. Procedia Engineering, 2011.
- [35] 常丽丽. Microstructure and mechanical properties of AM31 magnesium alloys processed by differential speed rolling . Journal of Materials Processing Technology, 211, 1527, 2011.
- [36] 常丽丽. Microstructure and mechanical properties of twin roll cast AM31 magnesium alloy sheet processed by differential speed rolling . Materials and design, 34, 746, 2012.
- [37] 常丽丽. Influence of strain path on the microstructure evolution and mechanical properties in AM31 magnesium alloy sheets processed by differential speed rolling. Materials and design, 44, 144, 2013.
- [38] 常丽丽. Strengthening effect of nano and micro-sized precipitates in the hot-extruded Mg-5Sn-3Zn alloys with Ca addition. JOURNAL OF ALLOYS AND COMPOUNDS, 703, 552, 2017.
- [39] 李胜利 , 朱新德 and 常丽丽. Influence of cerium on solidification, recrystallization and strengthening of Cu-Ag alloys. Journal of Rare Earths, 35, 1029, 2017.
- [40] 常丽丽. Ti-5Al-5Mo-5V-1Cr-1Fe等温热压缩行为及本构方程的建立（英文）. Transactions of Nonferrous Metals Society of China, 2018.