• 2002-09-01-2006-07-01
  山东大学
• 2006-09-01-2009-06-30
  山东大学
• 2009-09-01-2013-06-01
  法国雷恩国立应用科学学院

• 2013-05 — Now
  机电与信息工程学院

(1) Solidified structure and mechanical properties control of 2319 aluminum alloy for ultrasonic vibration-assisted arc-directed energy deposition with different amplitudes

(2) Establishment and verification of anisotropic ductile fracture criteria applicable to AA6016-T4 incremental forming

(3) Improved surface integrity and fatigue property of FV520B steel via surface mechanical rolling treatment process

(4) Deformation mechanisms of AZ31 Mg alloy sheet assisted by electrical pulse- ultrasonic composite energy field

(5) Electric pulse-induced suppression of the Portevin – Le Chatelier behavior of 5086 aluminum alloy under uniaxial tension

(6) Effects of a hybrid post-treatment on microstructure and mechanical properties of cold sprayed AA7050 deposits

(7) A novel mechanical attachment for biaxial tensile test: Application to formability evaluation for DP590 at different temperatures

(8)葛听雨. A cryogenic incremental sheet forming process for improving the formability of AA6061 to reveal the dual enhancement effect and microstructure evolution mechanism .Journal of Materials Research and Technology .2024 ,33 :141-154

(9) Effect of electropulsing on springback during V-bending of Ti-6Al-4V titanium alloy sheet. .The International Journal of Advanced Manufacturing Technology .2018

(10) Investigation of the edge crack sensitivity of cold rolled hot-dip galvanized DP780 steels .Journal of Materials Engineering and Performance .2019

(11) Constitutive modelling and microscopic analysis of TC4 alloy sheet at elevated temperature[J] .Results in Physics .2019

(12) Experimental investigation on the deformation behaviors of Ti-6Al-4V sheet in electropulsing-assisted incremental forming. The Inte .rnational Journal of Advanced Manufacturing Technology, .2019

(13) Formability and deformation mechanism of Ti-6Al-4V sheet under electropulsing assisted incremental forming .International Journal of Solids and Structures .2020

(14) Microstructure evolution of AZ31B sheet deformed by electric hot temperature-controlled single point incremental forming .Materials Science and Engineering: A .2021 ,823

(15) Effect of surface integrity on fatigue life of 7075-T6 aluminum alloy by combination of fine turning with hydrostatic deep rolling .Archives of Civil and Mechanical Engineering .2023 ,23 :41

(16) Microstructural evolution and wear properties of in-situ (TiB + TiC)-reinforced Ti6Al4V matrix composite coating by laser melting deposition .Materials Characterization .2023 ,205

(17) Calibration of Yld2000-2D Anisotropy Yield Criterion with Traditional Testing and Inverse Identification Strategies .Materials .2023 ,16 :6904

(18) Effects of annealing and pulsed current treatment on the microstructure and mechanical properties of Cu/Al2O3 deposits prepared by cold spray .Journal of Materials Research and Technology .2024 ,29 :4294-4305

(19) A novel mechanical attachment for biaxial tensile test: Application to formability evaluation for DP590 at different temperatures .Journal of Materials Research and Technology .2024 ,28 :4025-4039

1. 一种点云配准方法、渐进成形镜像面补偿方法及系统

2. 基于多模态大模型的工业机器人双点渐进成形方法及系统

3. 一种铝合金深冷渐进成形工艺 发明专利证书

4. 一种深冷十字拉伸试验装置及试验方法

5. 适用于高温条件下的十字双拉综合测试平台及方法

6. 电脉冲辅助热挤压成形装置及成形方法

7. 镁合金板料电致塑性渐进成形方法

8. 一种双向十字拉伸测试装置

9. 镁合金板料电致塑性渐进成形方法

10. 板料电致塑性无模复合渐进成形系统

11. 板料电致塑性渐进成形用通电旋转刀具系统

12. 板料电致塑性多功能V形弯曲模具和系统

1. 低合金超高强钢脉冲电流-表面机械滚压复合工艺及多效应深度强化机理, 国家自然科学基金面上项目，主持

2. 电脉冲-超声振动辅助镁合金渐进成形工艺及其形性调控机理研究, 国家自然科学基金面上项目，主持

3. 冷喷涂防腐再修复关键技术研发, 企业横向，主持

4. 面向半导体存储应用的BATCH ALD原子层沉积系统设计, 企业横向，主持

5. 超高强韧汽车用钢的关键制造技术及产业化应用, 山东省重大创新工程课题，主持

6. 镁合金板材**渐进成形机 理及关键技术研究, 山东省自然科学基金面上项目，主持

7. 金属双向复杂加载高低温力学测试装置研发, 威海市科技计划，主持

8. 钛合金板材穿孔拉伸塑性成形法三维点阵研究, 装发预研课题，主持

9. 航空铝合金板材温热冲压成形极限精确研究, 博士后基金，主持

10. 轻质合金板材力学性能表征及电塑性辅助加工成形机理研究, 山东大学青年学者未来计划，主持

11. 基于逆向分析的铝合金板料塑性变形本构关系构建及成形极限预测, 国家自然科学基金青年项目，主持

12. 基于温度/应变率耦合效应的铝合金板料FLDs构建, 山东省自然科学基金培育项目，主持

13. 轴向剖分单级双吸离心泵的参数化CAD建模及其仿真优化, 企业横向，主持