教育经历
  • 2002-9 — 2006-7
    山东大学
    工学学士
  • 2006-9 — 2009-6
    山东大学
    工学硕士
  • 2009-9 — 2013-6
    法国雷恩国立应用科学学院
    工学博士
工作经历
  • 2013-5 — 至今
     机电与信息工程学院 
研究概况

教授、硕士/博士生导师、山东大学青年未来学者、威海市校地人才、江苏省双创人才、国家自然科学基金通讯评审专家、教育部学位中心研究生论文评审专家、山东省科技专家库入库专家。主要从事先进塑性成形工艺与装备、表面强化、固相增材制造、新能源电池热失控安全等领域的研究。近年来,发表科研论文60余篇,授权发明专利10余项。担任国际期刊JMEP、MSEA、JMPT、IJMS等期刊审稿人。

研究方向1:先进材料性能表征与建模仿真;

研究方向2:机器人柔性智能成形;

研究方向3:流体滚压表面强化;

研究方向4:固相增材制造。


论文

(1) Electro-plastic effect on tensile deformation behaviour and microstructural mechanism of AZ31B alloy..Materials Science and Technology,.2017

(2) Effect of electropulsing treatment on microstructure and mechanical behavior of Ti-6Al-4V alloy sheet under argon gas protection..Vacuum.2018

(3) Effect of electropulsing on springback during V-bending of Ti-6Al-4V titanium alloy sheet..The International Journal of Advanced Manufacturing Technology.2018

(4) Experimental investigation on formability of AZ31B magnesium alloy V-bending under pulse current..Acta Metallurgica Sinica (English Letters).2018

(5) Investigation of the edge crack sensitivity of cold rolled hot-dip galvanized DP780 steels.Journal of Materials Engineering and Performance.2019

(6) Identification of 7B04 aluminum alloy anisotropy yield criteria with conventional test and Pottier test at elevated temperature.Results in Physics.2019

(7) Az31b镁合金电致塑性渐进成形工艺分析.材料热处理学报.2019

(8) Constitutive modelling and microscopic analysis of TC4 alloy sheet at elevated temperature[J].Results in Physics.2019

(9) Grain refinement and strength enhancing of hot extruded Mg alloy by application of electric pulse.MATERIALS LETTERS Journal.2019,241 :104

(10) Experimental investigation on the deformation behaviors of Ti-6Al-4V sheet in electropulsing-assisted incremental forming. The Inte.rnational Journal of Advanced Manufacturing Technology,.2019

(11) Formability and deformation mechanism of Ti-6Al-4V sheet under electropulsing assisted incremental forming.International Journal of Solids and Structures.2020

(12) Effects of Shoulder Geometry on Microstructures and Mechanical Properties of Probeless Friction Stir Spot Welded Aluminum 7075-T651 Sheets.Metals.2020

(13) Microstructure evolution of AZ31B sheet deformed by electric hot temperature-controlled single point incremental forming.Materials Science and Engineering: A.2021,823

(14) Evaluation of friction reduction and frictionless stress in ultrasonic vibration forming process.Journal of Materials Processing Technology.2021

(15) Temperature Influence on Formability and Microstructure of AZ31B during Electric Hot Temperature-Controlled Incremental Forming.Materials.2021

(16) Manufacturing Process and Compression Performance of TC4 Pyramid Lattice Structure with Laser Welding | TC4金字塔点阵结构的激光焊接及其平压性能.Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research.2021,35 :623-631

(17) Comparative Investigation of the Experimental Determination of AA5086 FLCs under Different Necking Criteria.Materials.2021

(18) Formability and microstructure evolution of Ti-6Al-4 V alloy in electric hot incremental forming.International Journal of Advanced Manufacturing Technology.2022,119 :2935-2944

(19) Surface quality study of AZ31B Mg alloy in electric pules-ultrasonic assisted incremental sheet forming.International Journal of Advanced Manufacturing Technology.2022,122 :1919-1932

(20) Investigation on Electric Pulse-Ultrasonic Assisted Incremental Forming of AZ31B Mg Alloy.Journal of Materials Engineering and Performance.2023

(21) Effect of surface integrity on fatigue life of 7075-T6 aluminum alloy by combination of fine turning with hydrostatic deep rolling.Archives of Civil and Mechanical Engineering.2023,23 :41

(22) Microstructural evolution and wear properties of in-situ (TiB + TiC)-reinforced Ti6Al4V matrix composite coating by laser melting deposition.Materials Characterization.2023,205

(23) Calibration of Yld2000-2D Anisotropy Yield Criterion with Traditional Testing and Inverse Identification Strategies.Materials.2023,16 :6904

(24) Effects of annealing and pulsed current treatment on the microstructure and mechanical properties of Cu/Al2O3 deposits prepared by cold spray.Journal of Materials Research and Technology.2024,29 :4294-4305

(25) A novel mechanical attachment for biaxial tensile test: Application to formability evaluation for DP590 at different temperatures.Journal of Materials Research and Technology.2024,28 :4025-4039

专利
版权所有   ©山东大学 地址:中国山东省济南市山大南路27号 邮编:250100 
查号台:(86)-0531-88395114
值班电话:(86)-0531-88364731 建设维护:山东大学信息化工作办公室