![]()
董桂伟
-
正高级实验师
硕士生导师
- 性别：男
- 毕业院校：山东大学
- 学历：博士研究生毕业
- 学位：工学博士学位
- 在职信息：在职
- 所在单位：材料科学与工程学院
- 入职时间： 2006-07-16
- 办公地点：山东大学千佛山校区主楼817室
- 联系方式：gwdong@sdu.edu.cn
18954196961
- 电子邮箱：gwdong@sdu.edu.cn
访问量：
-
[21]
赵国群 , 王桂龙 , 董桂伟 and 侯俊吉.
A novel gas-assisted microcellular injection molding method for preparing lightweight foams with sup.
Materials & Design,
127,
115,
2017.
-
[22]
赵国群 , 王桂龙 , 董桂伟 and 张磊.
Investigation on bubble morphological evolution and plastic part surface quality of microcellular in.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,
104,
1246,
2017.
-
[23]
赵国群 , 管延锦 and 董桂伟.
模具型腔气体压力对微发泡注塑件表面质量的影响.
机械工程学报,
79,
2015.
-
[24]
赵国群 and 董桂伟.
Bubble morphological evolution and surface defect formation mechanism in the microcellular foam inje.
RSC advances,
70032,
2015.
-
[25]
赵国群 , 董桂伟 and 王桂龙.
Bubble morphological evolution and surface defect formation mechanism in the microcellular foam inje.
RSC advances,
5,
70032,
2015.
-
[26]
赵国群 and 董桂伟.
Study on reducing sink mark depth of a microcellular injection molded part with many reinforcing rib.
Journal of Cellular Plastics,
52,
479,
2016.
-
[27]
董桂伟 , 赵国群 and 管延锦.
Formation mechanism and structural characteristics of unfoamed skin layer in microcellular injection.
Journal of Cellular Plastics,
2015.
-
[28]
董桂伟 , 赵国群 , 管延锦 and 王桂龙.
The Cell Forming Process of Microcellular Injection-Molded Parts.
Journal of applied polymer science,
2014.
-
[29]
董桂伟.
拉延压力机多连杆机构运动分析与优化设计.
锻压机械,
2006,
27,
-
[30]
董桂伟.
铝合金型材挤压模工作带长度优化方法研究.
锻压装备与制造技术,
2012.
-
[31]
王桂龙 , 赵国群 , 董桂伟 and 牟玥.
Lightweight and strong microcellular injection molded PP/talc nanocomposite.
Composites Science and Technology,
168,
38,
2018.
-
[32]
管延锦 , 董桂伟 and 赵国群.
模具型腔气体压力对微发泡注塑件表面质量的影响.
机械工程学报,
79,
2015.
-
[33]
董桂伟 and 赵国群.
Bubble morphological evolution and surface defect formation mechanism in the microcellular foam inje.
RSC advances,
70032,
2015.
-
[34]
董桂伟 , 王桂龙 and 赵国群.
Bubble morphological evolution and surface defect formation mechanism in the microcellular foam inje.
RSC advances,
5,
70032,
2015.
-
[35]
董桂伟 and 赵国群.
Study on reducing sink mark depth of a microcellular injection molded part with many reinforcing rib.
Journal of Cellular Plastics,
52,
479,
2016.
-
[36]
赵国群 , 董桂伟 , 宋立彬 and 王桂龙.
Lightweight, thermally insulating, and low dielectric microcellular high-impact polystyrene (HIPS) f.
JOURNAL OF MATERIALS CHEMISTRY C,
6,
12294,
2018.
-
[37]
赵国群 , 董桂伟 , 牟玥 and 王桂龙.
Lightweight, super-elastic, and thermal-sound insulation bio-based PEBA foams fabricated by high-pre.
European Polymer Journal,
103,
68,
2018.
-
[38]
赵国群 , 董桂伟 , 牟玥 and 王桂龙.
Lightweight and strong microcellular injection molded PP/talc nanocomposite.
Composites Science and Technology,
168,
38,
2018.
-
[39]
管延锦 , 董桂伟 and 赵国群.
模具型腔气体压力对微发泡注塑件表面质量的影响.
机械工程学报,
79,
2015.
-
[40]
赵国群 , 王桂龙 , 董桂伟 and 侯俊吉.
A novel gas-assisted microcellular injection molding method for preparing lightweight foams with sup.
Materials & Design,
127,
115,
2017.
