教授
性别：男
在职信息：在职
所在单位：工程训练中心
入职时间：2004-07-16
访问量：
最后更新时间：..
-
[81]
姜兆亮 and 仪维.
Process Based Machining Deformation Control for End Milling.
Advanced Materials research,
426,
265,
2011.
-
[82]
姜兆亮.
A surface residual-stress model of optimizing milling parameters for milling aluminum alloy 6061.
Advanced Materials research,
426,
7,
2011.
-
[83]
姜兆亮 and 孟祥旭.
Analysis of the workpiece elastic deformation holding in fixture with high definition metrology.
Advanced Materials research,
102-104,
12,
2010.
-
[84]
姜兆亮 and 刘文平.
Assembly sequencing oriented product configuration optimization.
proceedings of the 29th Chinese Control Conference, CCC'10,
0,
5343,
2011.
-
[85]
姜兆亮.
Zonal compensation for work-piece elastic deformation through fixture layout optimization.
Applied mechanics and materials,
26-28,
854,
2010.
-
[86]
姜兆亮.
基于双层配置体系的产品配置算法研究 .
《计算机集成制造系统》,
15,
893,
2009.
-
[87]
仪维 and 姜兆亮.
Effect of Different Machining Parameters on Time-Dependent Flatness.
Applied mechanics and materials,
670-671,
502,
2014.
-
[88]
姜兆亮 and 刘文平.
基于NSPSO算法的混合装配线平衡问题多目标优化.
《农业机械学报》,
44,
248,
2013.
-
[89]
姜兆亮 and 范志君.
基于设计规范的产品三维建模方法研究.
《制造技术与机床》,
0,
77,
2010.
-
[90]
姜兆亮.
Error compensation of the thin plate-shape part with prebending method in face milling.
chinese journal of mechanical engineering,
28,
2015.
-
[91]
姜兆亮.
无色差光滑曲面特征点的提取及匹配算法.
光学学报,
2018.
-
[92]
姜兆亮 and 范志君.
Multi-objective optimization of product configuration based on customer’s Performance satisfaction.
Advanced Materials research,
500,
466-471,
2012.
-
[93]
姜兆亮 and 刘文平.
闭式液压系统油温分析及补油量确定.
中南大学学报,
44,
3658,
2013.
-
[94]
刘文平 , 姜兆亮 and 仪维.
The influence of stretched fixation on face milling-machined 6061T6 aluminum alloy .
Key Engineering Materials,
2013.
-
[95]
姜兆亮 and 范志君.
Integrated Quantitative Analysis of Customer Satisfaction Based on Kano's Model.
Applied mechanics and materials,
2012.
-
[96]
姜兆亮 and 范志君.
Ontology-Driven Requirements Elicitation Based on Scenario.
Advanced Materials Research,,
2012.
-
[97]
姜兆亮 and 刘文平.
A simulaton study of logistics activities in mixed-model assembly lines with genetic algorithm.
Automation and Logistics, 2007 IEEE International Conference,
141,
2007.
-
[98]
姜兆亮 and 孟祥旭.
Optimization of product assembly relations based on connection reliability.
Key Engineering Materials,
0,
431,
2010.
-
[99]
姜兆亮 and 刘文平.
Optimisation of automobile assembly lines using logistics simulaton.
International Technology and Innovation Conference 2006 (ITIC 2006),
0,
710,
2006.
-
[100]
姜兆亮 and 刘文平.
Development of a new type of pileing machine using virtual prototyping technology.
International Technology and Innovation Conference 2006,
2,
715,
2006.
-
版权所有 ©山东大学 地址：中国山东省济南市山大南路27号 邮编：250100
查号台：（86）-0531-88395114
值班电话：（86）-0531-88364731 建设维护：山东大学信息化工作办公室
-
手机版
登录 | 山东大学
