教授
性别：男
在职信息：在职
所在单位：工程训练中心
入职时间：2004-07-16
访问量：
最后更新时间：..
-
[1]
Zhao, Li.
Regulation of residual stress in stereolithography printing of ZrO2 ceramics.
Ceramics International,
49,
30801-30810,
2023.
-
[2]
Guo, Weiwei.
Hierarchically porous bone scaffold fabricated via direct foam writing with TCP/ZrO2 composite ink.
JOURNAL OF ALLOYS AND COMPOUNDS ,
1003,
2024.
-
[3]
Li, Xiuzhong.
Research on the characteristics of a new microbubble generator based on the Venturi tube.
CHEMICAL ENGINEERING AND PROCESSING,
203,
2024.
-
[4]
Ding, Zhaolei.
The formation process of self-coordinated microchannels with heat transfer enhancement advantage during phase change cold energy storage.
THERMAL SCIENCE AND ENGINEERING PROGRESS,
48,
2024.
-
[5]
Ding, Zhaolei.
External influences on the freezing capacity of microchannels in foam freezing phase change cold energy storage using quantitative parameters of microchannel structure as intermediate variables.
International communications in heat and mass transfer,
156,
2024.
-
[6]
Nasreen, Naila.
Optical soliton solutions of the coupled equation in a stratified deep sea environment with engineering application.
Ocean Engineering,
327,
2025.
-
[7]
Zhao, Li.
Influence of 3D printing stress wave on residual stress.
EPL,
135,
2021.
-
[8]
Guo, Weiwei.
3D printing of multifunctional gradient bone scaffolds with programmable component distribution and hierarchical pore structure.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,
166,
2023.
-
[9]
Guo, Weiwei.
Impact of online mixing via KSM on the accuracy of ingredient deposition in manufacturing FGMs.
国际机械科学,
241,
2023.
-
[10]
郭伟伟.
Direct ink writing of functionally graded bone scaffolds using ceramic foams to mimic natural bone hierarchical porosity and multiple gradients.
Composites Part B: Engineering,
2025.
-
[11]
Zhao, Li.
Theoretical model based on stress waves and experimental verification of residual stress in stereolithography printed ZrO2 porous ceramics.
Ceramics International,
2022.
-
[12]
Gao, Xueqing.
Effect of Adjuvants on the Wetting Behaviors of Bifenthrin Droplets on Tea Leaves.
Applied Sciences-Basel,
12,
2022.
-
[13]
刘玥.
"五育并举"视域下加强高校宿舍文化建设.
当代教育实践与教学研究（电子刊）,
197-200,
2024.
-
[14]
陈子旭.
旋转机械运行大数据综合实验云平台的设计及教学实践.
1-3,
2022.
-
[15]
郭伟伟.
Fabrication process of smooth functionally graded materials through a real-time inline control of the component ratio.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY Journal,
41,
256,
2021.
-
[16]
丁兆磊.
High-Performance Charging Method for Cold Energy Storage Using Foam Freezing.
Energy Technology,
10,
2022.
-
[17]
丁兆磊.
High heat transfer performance of foam freezing in phase change cold energy storage process.
JOURNAL OF ENERGY STORAGE,
44,
2021.
-
[18]
赵丽.
Theoretical modeling based on stress wave propagation and experimental verification of residual stress in stereolithography printed ZrO2 ceramic suspensions.
Ceramics International,
47,
26935,
2021.
-
[19]
张成鹏.
Highly Sensitive and Reproducible SERS Substrates Based on Ordered Micropyramid Array and Silver Nanoparticles.
ACS Applied Materials & Interfaces,
13,
29222,
2021.
-
[20]
章程.
Mechanical characteristics and deformation mechanism of functionally graded triply periodic minimal surface structures fabricated using stereolithography.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal,
2021.
-
版权所有 ©山东大学 地址：中国山东省济南市山大南路27号 邮编：250100
查号台：（86）-0531-88395114
值班电话：（86）-0531-88364731 建设维护：山东大学信息化工作办公室
-
手机版
登录 | 山东大学
