教授
性别：男
在职信息：在职
所在单位：工程训练中心
入职时间：2004-07-16
访问量：
最后更新时间：..
-
[141]
姜兆亮.
A novel prediction model for thin plate deflections considering milling residual stresses.
international Journal of Advanced Manufacturing Technology,
2014.
-
[142]
姜兆亮.
Study on the automatic test device of airflow performance in refrigerator transportation vehicle.
Materials science forum,
2013.
-
[143]
姜兆亮.
基于PLC的夹紧力在线调控系统.
《机电工程》,
30,
852,
2013.
-
[144]
姜兆亮.
Air supply system optimization for the multi-temperature refrigerated trucks.
Key Engineering Materials,
546,
35,
2013.
-
[145]
刘文平 and 姜兆亮.
A non-dominated sorting particle swarm optimization algorithm for mixed-model assembly line sequencing problem.
Advanced Materials research,
628,
451,
2013.
-
[146]
刘文平 and 姜兆亮.
基于NSPSO算法的混合装配线平衡问题多目标优化.
《农业机械学报》,
44,
248,
2013.
-
[147]
姜兆亮.
Multi-objective optimization of order oriented mixed-model assembly line sequencing problem.
Advanced Materials research,
717,
460,
2013.
-
[148]
仪维 , 刘文平 and 姜兆亮.
The influence of stretched fixation on face milling-machined 6061T6 aluminum alloy.
Key Engineering Materials,
2014.
-
[149]
刘文平 and 姜兆亮.
A non-dominated sorting particle swarm optimization algorithm for mixed-model assembly line sequencing problem.
Applied materials research,
628,
451,
2012.
-
[150]
刘文平 and 姜兆亮.
Rebound deformation of thin part caused by clamping force in end milling.
Applied Mechanics and Material,
217,
1655,
2012.
-
[151]
刘文平 and 姜兆亮.
A prediction model of deflection of fixing thin parts.
Applied mechanics and materials,
217,
1526,
2012.
-
[152]
姜兆亮.
Order-oriented cooperative sequencing optimization in multi mix-model assembly .
International Journal of Production Research,
50,
7198,
2012.
-
[153]
刘文平 and 姜兆亮.
Supplier selection and order splitting in multiple-sourcing invertory systems.
Front. Mech. Eng.,
2007.
-
[154]
姜兆亮.
MULTI-OBJECTIVE OPTIMIZATION OF PRODUCT CONFIGURATION.
ASME 2008 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference,
1,
2008.
-
[155]
孟祥旭 and 姜兆亮.
Optimization of product assembly relation based on connection reliability .
Key Engineering Materials,
431-432,
289,
2010.
-
[156]
姜兆亮.
Order-oriented cooperative sequencing optimisation in multi-mix-model assembly lines.
International Journal of Production Research,
IFIRST,
1,
2011.
-
[157]
姜兆亮.
基于UG的整体硬质合金立铣刀数字化建模.
《组合机床与自动化加工技术》,
4,
2011.
-
[158]
刘玉梅 , 刘文平 and 姜兆亮.
基于薄板件装夹变形控制的夹紧点位置优化方法研究.
《组合机床与自动化加工技术》,
23,
2011.
-
[159]
姜兆亮.
大规模定制下的汽车销售订单生命周期管理.
《控制工程》,
15,
538,
2008.
-
[160]
范志君 and 姜兆亮.
基于设计规范的产品三维建模方法研究.
《制造技术与机床》,
0,
77,
2010.
-
版权所有 ©山东大学 地址：中国山东省济南市山大南路27号 邮编：250100
查号台：（86）-0531-88395114
值班电话：（86）-0531-88364731 建设维护：山东大学信息化工作办公室
-
手机版
登录 | 山东大学
