山东大学教师主页来庆国论文成果中文主页

+

个人信息

来庆国

教师姓名：来庆国
入职时间：2002-07
所在单位：山东大学第二医院
性别：男

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

[1] 杨功先. Stereolithography Printing and Mechanical Properties of Polyethylene Glycol Diacrylate/Hexagonal Boron Nitride Ceramic Composites. Advanced Engineer..., 26, 2024.
[2] 周兴国. Polyelectrolyte Multilayer Coating on 3D Printed PEGDA/TCP Scaffold with Improved Cell Proliferation. Additive Manufact..., 3, 2024.
[3] 周兴国. Construction of bilayer biomimetic periosteum based on SLA-3D printing for bone regeneration. COLLOIDS AND SURF..., 246, 2025.
[4] 陈清华. SLA-3d printed building and characteristics of GelMA/HAP biomaterials with gradient porous structure. Journal of the Me..., 155, 2024.
[5] 陈清华. 3D printing of PEGDA/bioceramic for guiding cell adhesion and migration. SURFACES AND INTE..., 48, 2024.
[6] 陈清华. SLA-3d printing and compressive strength of PEGDA/nHAP biomaterials. Ceramics Internat..., 2022.
[7] 陈清华. Influence of irradiation parameters on the curing and interfacial tensile strength of HAP printed part fabricated by SLA-3D printing. Journal of the Eu..., 2022.
[8] 赵红宇. Additive manufacturing of graphene oxide/hydroxyapatite bioceramic scaffolds with reinforced osteoinductivity based on digital light processing technology. Materials & Desig..., 2022.
[9] 唐晓朋. Hard Tissue Preservation and Recovery in Minimally Invasive Alveolar Surgery Using Three-Dimensional Printing Guide Plate.. TheJournalofcrani..., 33, E476-E481, 2021.
[10] Li, Yan. Finite element analysis of 3D-printed personalized titanium plates for mandibular angle fracture. COMPUTER METHODS ..., 1-12, 2022.
[11] 李国菊. Transcription factor osterix modified bone marrow mesenchymal stem cells enhance callus formation during distraction osteogenesis. ORAL SURGERY ORAL..., 111, 412, 2011.
[12] 赵红宇. Mechanical properties, microstructure, and bioactivity of β-Si3N4/HA composite ceramics for bone reconstruction. Ceramics Internat..., 2021.
[13] 来庆国. 3D printing and osteogenesis of loofah-like hydroxyapatite bone scaffolds. Ceramics Internat..., 47, 2021.
[14] 钟驰阳. Assembly of 3D-printed Ti scaffold and free vascularized fibula using a customized Ti plate for the reconstruction of mandibular defects. BIO-DESIGN AND MA..., 5, 2022.
[15] 邢宏宇. Preparation and characterization of UV curable Al2O3 suspensions applying for stereolithography 3D printing ceramic microcomponent. Powder technology, 338, 153, 2018.
[16] 陈清华. 3D printing and osteogenesis of loofah-like hydroxyapatite bone scaffolds. Ceramics Internat..., 47, 20352, 2021.

共 17 条 1/2

首页上一页下一页尾页页