李剑峰山东大学主页平台管理系统--中文主页

李剑峰

学位：工学博士学位
职称：教授
所在单位：工程训练中心

教师英文名称：Li Jianfeng
教师拼音名称：Li Jianfeng
出生日期：1963-01-21
入职时间：1985-07-01
所在单位：工程训练中心
学历：博士研究生毕业
办公地点：1.兴隆山校区工程训练中心 2.千佛山校区创新大厦814
性别：男
联系方式：13954168841 ljf@sdu.edu.cn
在职信息：在职
毕业院校：山东工业大学（山东大学）
是否在职：1
博士生导师
硕士生导师

论文成果

[451] 李剑峰 and 张松. An experimental investigation of cutting forces in hard milling of H13 steel under different cooling/lubrication conditions. Key Engineering Materials, 589-590, 13, 2014.
[452] 李剑峰 , 李方义 and 贾秀杰. Biomass biodegradable starch material cushioning packaging products and plasticizing properties of compatibility. Applied Mechanics and Mtaterials, vols 541-542(2014), 343, 2014.
[453] 李剑峰 , 李方义 and 贾秀杰. The research of biomass biodegradable material microstructure impact on performance. Applied Mechanics and Mtaterials, vols 541-542(2014), 338, 2014.
[454] 李剑峰 , 孙杰 , 周军 and 皇攀凌. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Types of Tools. Journal of Cleaner Production, 67, 258, 2014.
[455] 李剑峰 and 郭安福. 生物质缓冲包装制品成形工艺优化及其性能研究. 机械工程学报, 2013.
[456] 李剑峰 and 张松. Saw-tooth chip formation and its effect on cutting force fluctuation in turning of Inconel 718. International Journal of Precision Engineering and Manufacturing, 14, 957, 2013.
[457] 李剑峰 , 李方义 and 贾秀杰. 离心式空压机内固粒对叶轮磨损的数值模拟. 中南大学学报(自然科学版), 44, 4047, 2013.
[458] 李剑峰 and 李建勇. The Process Performance Test Study of Pure Chitin Fiber Spunlace Nonwoven. Advanced Materials research, 2012.
[459] 李剑峰 , 孙杰 , 周军 and 皇攀凌. Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy. international Journal of Advanced Manufacturing Technology, 67, 1385, 2013.
[460] 李剑峰 , 孙杰 , 周军 and 皇攀凌. Vibration analysis in milling titanium alloy based on signal processing of cutting force. international Journal of Advanced Manufacturing Technology, 64, 613, 2013.
[461] 李剑峰 and 张松. Statistical modeling of surface roughness in hard milling H13 steel. Materials science forum, 697-698, 61, 2012.
[462] 李剑峰 and 张松. Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions. Journal of Cleaner Production, 32, 81, 2012.
[463] 李剑峰 and 张松. Tool wear criterion, tool life, and surface roughness during high-speed end-milling Ti-6Al-4V alloy. JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 11, 587, 2010.
[464] 李剑峰 and 张松. Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy. international Journal of Advanced Manufacturing Technology, 46, 69, 2010.
[465] 李剑峰 , 黄晓慧 , 赵国群 and 赵新海. Optimal preform die shape design through controlling deformation uniformity and deforming force in metal forging. Jixie Gongcheng Xuebao/Journal of Mechanical, 19, 1496, 2008.

共485条 31/33

首页上页下页尾页页

扫一扫用手机查看