李剑峰山东大学主页平台管理系统--中文主页

李剑峰

学位：工学博士学位
职称：教授
所在单位：工程训练中心

教师英文名称：Li Jianfeng
教师拼音名称：Li Jianfeng
出生日期：1963-01-21
入职时间：1985-07-01
所在单位：工程训练中心
学历：博士研究生毕业
办公地点：1.兴隆山校区工程训练中心 2.千佛山校区创新大厦814
性别：男
联系方式：13954168841 ljf@sdu.edu.cn
在职信息：在职
毕业院校：山东工业大学（山东大学）
是否在职：1
博士生导师
硕士生导师

论文成果

[1] 杨贺刚. Micromechanical characterization of zwitterionic polymer brushes based on the atomic force microscopy. Applied Surface Science, 665, 2024.
[2] . Low-cost and convenient fabrication of polymer micro/nanopores with the needle punching process and their applications in nanofluidic sensing. BIOMICROFLUIDICS, 18, 2024.
[3] . Preparation of pH-sensitive porous polylactic acid-based medical dressing with self-pumping function. International Journal of Biological Macromolecules, 267, 2024.
[4] 宋鑫忠. High-density zwitterionic polymer brushes exhibit robust lubrication properties and high antithrombotic efficacy in blood-contacting medical devices. Acta Biomaterialia, 2024.
[5] 王世庆. Study on the influential effect of different CaCO3 particle sizes on the internal pore structure of starch/fiber foaming composite materials. Materials Today Communications, 38, 2024.
[6] 孙佳毅. An on-line imaging sensor based on magnetic deposition and flowing dispersion for wear debris feature monitoring. Mechanical Systems and Signal Processing, 212, 2024.
[7] 宋鑫忠. Design, preparation, and characterization of lubricating polymer brushes for biomedical applications. Acta Biomaterialia, 175, 76-105, 2023.
[8] Li, Yanle. Erosion Wear Behavior of Cr3C2-kNiCr Coating under Multi-angle Impact. 基于铣削力精确建模的工件表面, 59, 343-352, 2023.
[9] 孔琳. Life cycle-oriented low-carbon product design based on the constraint satisfaction problem. Energy Conversion and Management, 286, 2023.
[10] 王黎明. A novel wheel path generation approach for grinding taper end-mills subjected to variable cross-section. International Journal of Advanced Manufacturing Technology , 2023.
[11] 万光虎. 风电轴承保持架冲压工艺参数优化. 《轴承》, 2023.
[12] 孔琳. Life cycle-oriented low-carbon product design based on the constraint satisfaction problem. ENERGY CONVERSION AND MANAGEMENT, 286, 2023.
[13] 万光虎. 风电轴承保持架冲压工艺参数优化. 《轴承》, 80-83, 2023.
[14] 王黎明. A novel wheel path generation approach for grinding taper end-mills subjected to variable cross-section. international Journal of Advanced Manufacturing Technology, 129, 1395-1411, 2023.
[15] 王黎明. A novel approach to minimizing material loss for computer numerical control flank-regrinding of worn end mills. FRONTIERS OF MECHANICAL ENGINEERING, 18, 2023.

共485条 1/33

首页上页下页尾页页

扫一扫用手机查看