Hits:
Affiliation of Author(s):Shandong University, Weihai
Journal:Ceramics International
Key Words:Reaction-bonded silicon carbide (RBSiC)Eco-friendly electrolytesElectrochemical oxidationOxide film thickness prediction modelXRDXPS
Abstract:3D printed reaction-bonded silicon carbide (RBSiC) is widely employed across various industries due to its complex geometries and exceptional properties. However, its precise machining remains a significant challenge. Electrochemical grinding (ECG) presents a promising solution for the precise machining of RBSiC. Still, further optimization of the process is still required. In this study, we investigate the electrochemical oxidation and corrosion behavior of 3D printed RBSiC in an eco-friendly KH2PO4 electrolyte, characterize its microstructure and phases composition, and developed a predictive model for the thickness of the oxidation layer. Experimental results show that the oxidation process of RBSiC, influenced by free silicon, is intricate and segmented, involving the oxidation of Si and SiC as well as Si over-passivation under high voltage. SEM reveals that the oxide film thickness ranges from 1.57 μm to 15.5 μm. EIS and microstructural analysis identify micro defects filled with electrolyte in the oxide layer at high voltage, causing the dielectric constant to surge to 19.65—a nearly 500 % increase. Thus, this study calibrates oxidation current efficiency (η) and the real dielectric constant (εra) of RBSiC in KH2PO4 electrolyte, leading to the development of a three-stage predictive model that matching with the observed oxide film growth trends. These findings provide a theoretical framework and empirical data for optimizing ECG processing of RBSiC.
All the Authors:Kan Wang, Yipeng Qin, Xiaotong Wu
First Author:Chenxin Li
Indexed by:Research Paper
Correspondence Author:Yong Liu
Document Code:10.1016/j.ceramint.2024.12.330
Document Type:Journal article
Volume:51
Issue:7
Page Number:8997-9011
ISSN No.:0272-8842
Translation or Not:no
Date of Publication:4571-07-01
