location: Current position: Home >> Scientific Research >> Paper Publications

Material corrosion characteristics of heat-treated SLM-ed Hastelloy X in electrochemical machining process

Hits:

Affiliation of Author(s):Shandong University, Weihai

Journal:MATERIALS TODAY COMMUNICATIONS

Key Words:Hastelloy XCorrosion characteristicsElectrochemical machiningSelective laser melting

Abstract:Selective laser melting (SLM) technology and electrochemical machining (ECM) offer new methods for producing nickel-based superalloys with complex structures and high surface quality, including Hastelloy X parts. However, SLM-fabricated parts exhibit significant anisotropy, and there are no effective criteria for evaluating material corrosion characteristics in actual ECM due to the detachment of research and application, making the parameter selection challenging in actual ECM. To address this issue, this article proposes a comprehensive evaluation system based on the corrosion characteristics in the actual machining process and investigates the effect of heat treatment temperature on the corrosion characteristics of Hastelloy X in ECM. The results show that at a heat treatment temperature of 1000 degrees C, machining efficiency, accuracy, and localization can all be achieved at a good level with good consistency in different directions at the expense of a certain machining accuracy. The 800 degrees C heat-treated specimen exhibits strong corrosion resistance, providing a significant advantage in machining localization and accuracy. When the heat treatment temperature exceeds the solid solution temperature (more than 1175 degrees C), the mechanical properties and corrosion characteristics of the specimen are significantly degraded. The results of various material testing methods, including electrochemical testing, EBSD, XRD, and EDS indicate that changes in grain size due to recrystallization and the galvanic effect of precipitates are the primary causes of these changes.

All the Authors:Guan, Wenchao,Wang, Kan

First Author:Yipeng Qin

Indexed by:Research Paper

Correspondence Author:Yong Liu

Document Code:10.1016/j.mtcomm.2024.109105

Document Type:Journal article

Volume:39

Page Number:109105

ISSN No.:2352-4928

Translation or Not:no

Date of Publication:4545-03-01

Pre One:Ultrasonic assisted electrochemical drilling and grinding of small holes on SLMed Hastelloy X with rotating abrasive tube electrode

Next One:Preparation high-performance SiC ceramic reinforced with 3D hybrid graphene oxide-carbon nanotube by direct ink writing and liquid silicon infiltration