|
个人信息Personal Information
教授 博士生导师 硕士生导师
主要任职：车辆工程研究所支部书记、副所长
性别：男
毕业院校：昆士兰大学
学历：博士研究生毕业
学位：工学博士学位
在职信息：在职
所在单位：机械工程学院
入职时间：2015-10-09
办公地点：千佛山校区7-810
扫描关注
- [41] 李燕乐. Incremental sheet forming towards biomedical implants: a review. Journal of Materials Research and Technology, 2020.
- [42] 徐长续. The influence of self-lubricating coating during incremental sheet forming of TA1 sheet. international Journal of Advanced Manufacturing Technology, 110, 2465, 2020.
- [43] 李燕乐. Investigation of the Effect of Process Parameters on Energy Consumption in Incremental Sheet forming. Procedia CIRP, 2019.
- [44] 李燕乐. Deformation mechanics and efficient force prediction in single pointincremental forming. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY Journal, 2015.
- [45] 李燕乐. Investigation and optimization of deformation energy and geometric accuracy in the incremental sheet forming process using response surface methodology. ADVANCED MANUFACTURING SYSTEMS, PTS 1-3, 2015.
- [46] 李燕乐. Investigation on the material flow and deformation behavior during ultrasonic-assisted incremental forming of straight grooves. Journal of Materials Research and Technology, 2020.
- [47] 李燕乐. Effects of ultrasonic vibration on deformation mechanism of incremental point-forming process. Procedia Engineering, 2017.
- [48] 李燕乐. A Brief Review of Forming Forces in Incremental Sheet Forming. Materials Science Forum, 2016.
- [49] 李燕乐. 金属板材数控渐进成形工艺的研究进展. 精密成形工程, 9, 2017.
- [50] 成梓楠. Incremental sheet forming towards biomedical implants: a review. Journal of Materials Research and Technology, 9, 7225, 2020.
- [51] 张兴艺. Comparison on multi-angle erosion behavior and mechanism of Cr3C2-NiCr coatings sprayed by SPS and HVOF. Surface＆ Coatings Technology, 403, 2020.
- [52] 李燕乐 , 李方义 , 李剑峰 and 刘富远. Modelling of the effects of process parameters on energy consumption for incremental sheet forming process. Journal of Cleaner Production, 2020.
- [53] 李燕乐 , 孙玲玲 , 李方义 , 李剑峰 and 翟维东. Investigation on the forming force and surface quality during the UISF. International Journal of Advanced Manufacturing Technology, 2020.
- [54] 李燕乐 , 李方义 , 李剑峰 and 陈晓晓. 基于改进本构模型的超声辅助渐进成形仿真研究. 锻压技术, 2019.
- [55] 李燕乐 , 李剑峰 , 李方义 and 李振. Effect of NiCr content on the solid particle erosion behavior of NiCr-Cr3C2 coatings deposited by atmospheric plasma spraying. Surface and Coatings Technology, 2019.
- [56] 李燕乐 , 李剑峰 and 赵国群. Effects of process parameters on thickness thinning and mechanical properties of the formed parts in incremental sheet forming. International Journal of Advanced Manufacturing Technology, 27, 3071, 2018.
- [57] 李燕乐. Small data-driven modeling of forming force in single point incremental forming using neural networks. Engineering with computers, 2019.
- [58] 李燕乐 , 李方义 and 王黎明. Influences of plasma arc remelting on microstructure and service performance of Cr3C2-NiCr/NiCrAl composite coating. Surface and Coatings Technology, 2019.
- [59] 李燕乐 , 李方义 and 李剑峰. Constitutive modeling and deformation analysis for the ultrasonic-assisted incremental forming process. international Journal of Advanced Manufacturing Technology, 2019.
- [60] 王黎明 , 李方义 , 李剑峰 and 李燕乐. 内燃机增材再制造修复技术综述. 中国机械工程, 2018.