|
个人信息Personal Information
教授 博士生导师 硕士生导师
主要任职：车辆工程研究所支部书记、副所长
性别：男
毕业院校：昆士兰大学
学历：博士研究生毕业
学位：工学博士学位
在职信息：在职
所在单位：机械工程学院
入职时间：2015-10-09
办公地点：千佛山校区7-810
扫描关注
- [61] 李燕乐. Small data-driven modeling of forming force in single point incremental forming using neural networks. Engineering with computers, 2019.
- [62] 李燕乐 , 李方义 and 李剑峰. Investigation of the effect of process parameters on energy consumption in incremental sheet forming. 2019.
- [63] 李燕乐 , 李方义 and 李剑峰. Constitutive modeling and deformation analysis for the ultrasonic-assisted incremental forming process. international Journal of Advanced Manufacturing Technology, 2019.
- [64] 李燕乐. Experimental and numerical study on the deformation mechanism of straight flanging by incremental sheet forming. International Journal of Mechanical Sciences, 2019.
- [65] 李燕乐 , 王威强 , 李方义 and 李剑峰. Damage mechanism and evaluation model of compressor impeller remanufacturing blanks: A review. Frontiers of Mechanical Engineering, 2019.
- [66] 李燕乐 , 李方义 and 王黎明. Influences of plasma arc remelting on microstructure and service performance of Cr3C2-NiCr/NiCrAl composite coating. Surface and Coatings Technology, 2019.
- [67] 李燕乐. A brief review of forming forces in incremental sheet forming. Materials science forum, 2016.
- [68] 李燕乐 , 孙杰 and 李剑峰. 基于响应曲面法的板料渐进成形最大减薄率预测与分析. 吉林大学学报(工学版), 2018.
- [69] 李燕乐 , 孙玲玲 , 李剑峰 , 赵国群 and 翟维东. 超声振动对渐进成形过程成形力的影响. 锻压技术, 2018.
- [70] 李方义 , 李剑峰 , 李燕乐 and 张传伟. Novel treatments for compatibility of plant fiber and starch by forming new hydrogen bonds. Journal of Cleaner Production, 2018.
- [71] 李方义 , 李剑峰 , 王黎明 , 李燕乐 and 谢麒. A new biodegradable sisal fiber–starch packing composite with nest structure. Carbohydrate Polymers, 2018.
- [72] 李燕乐 , 王黎明 , 李剑峰 and 赵国群. Effects of process parameters on thickness thinning and mechanical properties of the formed parts in incremental sheet forming. international Journal of Advanced Manufacturing Technology, 98, 3071, 2018.
- [73] 李燕乐 , 孙杰 , 李剑峰 and Long, Yangyang. Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process. international Journal of Advanced Manufacturing Technology, 97, 13, 2018.
- [74] 李燕乐 , 李方义 , 李剑峰 and 赵国群. A review on the recent development of incremental sheet-forming process. international Journal of Advanced Manufacturing Technology, 92, 2439, 2017.
- [75] 孙杰 , 李燕乐 , 李剑峰 and 路来骁. A theoretical model for load prediction in rolling correction process of thin-walled aeronautic parts. international Journal of Advanced Manufacturing Technology, 92, 4121, 2017.
- [76] 孙杰 , 李剑峰 , 李燕乐 and 朱兆聚. Investigation on performance characteristics in drilling of Ti6Al4V alloy. international Journal of Advanced Manufacturing Technology, 93, 651, 2017.
- [77] 李燕乐. Deformation analysis in single-point incremental forming through finite element simulation. international Journal of Advanced Manufacturing Technology, 88, 255, 2017.
- [78] 李燕乐 and Long, Zhili. Dynamics Modeling and Residual Vibration Control of a Piezoelectric Gripper During Wire Bonding. IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, 7, 2045, 2017.
- [79] 李燕乐. Efficient force prediction for incremental sheet forming and experimental validation. The International Journal of Advanced Manufacturing Technology, 73, 571, 2014.
- [80] 李燕乐. Experimental study and efficient prediction on forming forces in incremental sheet forming. Advanced Materials research, 939, 313, 2014.