山东大学教师主页孟子杰 Paper Publications Home

Lab Master

No Content

Paper Publications

Home >> Scientific Research >> Paper Publications

[1] 成梓楠. Formation mechanism of deformation bands considering dynamic precipitation in Al-Zn-Mg-Cu alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 147941, 2025.
[2] 孟子杰. 2195铝锂合金的温热低周疲劳行为和疲劳寿命预测. transactions of nonferrous metals society of china, 33, 2574-2587, 2023.
[3] 孟子杰. 2195铝锂合金温热低周疲劳行为和疲劳寿命预测研究（英文）. transactions of nonferrous metals society of china, 1-26, 2022.
[4] 刘明甫. 基于Deform-2D的连续钢丝增强铝基复合棒料挤压流变规律. 锻压技术, 46, 177-183, 2021.
[5] 张存生. Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process. Journal of Materials Processing Technology, 283, 2020.
[6] 王玉宝. 一种新的耦合GTN模型以精确识别金属板料极限应变的三维M-K模型（英文）. transactions of nonferrous metals society of china, 1-20, 2022.
[7] 刘明甫. TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures. COMPOSITES PART B-ENGINEERING, 226, 2021.
[8] 成梓楠. Design and optimization of cruciform tension and shear specimen for forming limit acquisition. Journal of Materials Processing Technology, 340, 2025.
[9] 成梓楠. A through-process model for predicting the precipitation evolution and mechanical property of stress-aged Al-Zn-Mg-Cu alloy. INTERNATIONAL JOURNAL OF PLASTICITY, 192, 2025.
[10] 刘明甫. Novel interface characteristics and strengthening mechanisms in extruded fiber(Ti)-reinforced Al-based composites. Journal of Materials Processing Technology, 325, 2024.
[11] 王奎朝. Dynamic evolution of the T1 phase and its effect on continuous dynamic recrystallization in Al–Cu–Li alloys. INTERNATIONAL JOURNAL OF PLASTICITY, 175, 2024.
[12] 成梓楠. Dynamic precipitation and recrystallization behavior during hot deformation of Al-Zn-Mg-Cu alloy: Experiment and modeling. INTERNATIONAL JOURNAL OF PLASTICITY, 178, 2024.
[13] 颜军. Atomic strain concentration induced by interfaces in extruded carbon nanotube reinforced 2024Al matrix composite. Materials Characterization, 214, 2024.
[14] 柳振宇. Achieving the strength-ductility synergy in ultra-fined grained CNT/2024Al composites via a low-temperature aging strategy. COMPOSITES PART B-ENGINEERING, 281, 2024.
[15] 刘明甫. Enhancing strength and ductility of extruded Ti-alloy-reinforced Al-Mg-Si composites: Roles of interface nanostructures and chemical bonding. INTERNATIONAL JOURNAL OF PLASTICITY, 178, 2024.
[16] 李映直. Fatigue crack propagation behavior of 2195 Al-Li alloy plate at low temperature. INTERNATIONAL JOURNAL OF FATIGUE, 196, 2025.
[17] 柳振宇. Re-dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites. Materials Characterization, 207, 2024.
[18] 成梓楠. Formation mechanism of deformation bands considering dynamic precipitation in Al-Zn-Mg-Cu alloy. PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 927, 2025.
[19] 王奎朝. Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy. Materials and design, 223, 2022.
[20] 成梓楠. Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography. INTERNATIONAL JOURNAL OF PLASTICITY, 160, 2023.

TOTAL 37 PIECE 1/2

FIRSTPREVIOUSNEXT LAST PAGE

中文 | MOBILE Version | Login | SDU

Copyright All Rights Reserved Shandong University Address: No. 27 Shanda South Road, Jinan City, Shandong Province, China: 250100
Information desk: (86) - 0531-88395114
On Duty Telephone: (86) - 0531-88364731 Construction and Maintenance: Information Work Office of Shandong University

Click: Times

The Open Time: --

The Last Update Time: --

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[1] 成梓楠. Formation mechanism of deformation bands considering dynamic precipitation in Al-Zn-Mg-Cu alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 147941, 2025.

[2] 孟子杰. 2195铝锂合金的温热低周疲劳行为和疲劳寿命预测. transactions of nonferrous metals society of china, 33, 2574-2587, 2023.

[3] 孟子杰. 2195铝锂合金温热低周疲劳行为和疲劳寿命预测研究（英文）. transactions of nonferrous metals society of china, 1-26, 2022.

[4] 刘明甫. 基于Deform-2D的连续钢丝增强铝基复合棒料挤压流变规律. 锻压技术, 46, 177-183, 2021.

[5] 张存生. Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process. Journal of Materials Processing Technology, 283, 2020.

[6] 王玉宝. 一种新的耦合GTN模型以精确识别金属板料极限应变的三维M-K模型（英文）. transactions of nonferrous metals society of china, 1-20, 2022.

[7] 刘明甫. TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures. COMPOSITES PART B-ENGINEERING, 226, 2021.

[8] 成梓楠. Design and optimization of cruciform tension and shear specimen for forming limit acquisition. Journal of Materials Processing Technology, 340, 2025.

[9] 成梓楠. A through-process model for predicting the precipitation evolution and mechanical property of stress-aged Al-Zn-Mg-Cu alloy. INTERNATIONAL JOURNAL OF PLASTICITY, 192, 2025.

[10] 刘明甫. Novel interface characteristics and strengthening mechanisms in extruded fiber(Ti)-reinforced Al-based composites. Journal of Materials Processing Technology, 325, 2024.

[11] 王奎朝. Dynamic evolution of the T1 phase and its effect on continuous dynamic recrystallization in Al–Cu–Li alloys. INTERNATIONAL JOURNAL OF PLASTICITY, 175, 2024.

[12] 成梓楠. Dynamic precipitation and recrystallization behavior during hot deformation of Al-Zn-Mg-Cu alloy: Experiment and modeling. INTERNATIONAL JOURNAL OF PLASTICITY, 178, 2024.

[13] 颜军. Atomic strain concentration induced by interfaces in extruded carbon nanotube reinforced 2024Al matrix composite. Materials Characterization, 214, 2024.

[14] 柳振宇. Achieving the strength-ductility synergy in ultra-fined grained CNT/2024Al composites via a low-temperature aging strategy. COMPOSITES PART B-ENGINEERING, 281, 2024.

[15] 刘明甫. Enhancing strength and ductility of extruded Ti-alloy-reinforced Al-Mg-Si composites: Roles of interface nanostructures and chemical bonding. INTERNATIONAL JOURNAL OF PLASTICITY, 178, 2024.

[16] 李映直. Fatigue crack propagation behavior of 2195 Al-Li alloy plate at low temperature. INTERNATIONAL JOURNAL OF FATIGUE, 196, 2025.

[17] 柳振宇. Re-dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites. Materials Characterization, 207, 2024.

[18] 成梓楠. Formation mechanism of deformation bands considering dynamic precipitation in Al-Zn-Mg-Cu alloy. PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 927, 2025.

[19] 王奎朝. Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy. Materials and design, 223, 2022.

[20] 成梓楠. Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography. INTERNATIONAL JOURNAL OF PLASTICITY, 160, 2023.

Paper Publications

[1] 成梓楠. Formation mechanism of deformation bands considering dynamic precipitation in Al-Zn-Mg-Cu alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 147941, 2025.

[2] 孟子杰. 2195铝锂合金的温热低周疲劳行为和疲劳寿命预测. transactions of nonferrous metals society of china, 33, 2574-2587, 2023.

[3] 孟子杰. 2195铝锂合金温热低周疲劳行为和疲劳寿命预测研究（英文）. transactions of nonferrous metals society of china, 1-26, 2022.

[4] 刘明甫. 基于Deform-2D的连续钢丝增强铝基复合棒料挤压流变规律. 锻压技术, 46, 177-183, 2021.

[5] 张存生. Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process. Journal of Materials Processing Technology, 283, 2020.

[6] 王玉宝. 一种新的耦合GTN模型以精确识别金属板料极限应变的 三维M-K模型（英文）. transactions of nonferrous metals society of china, 1-20, 2022.

[7] 刘明甫. TiAl3 nucleation mechanism and atomic-scale interface features in the Al/Ti composite structures. COMPOSITES PART B-ENGINEERING, 226, 2021.

[8] 成梓楠. Design and optimization of cruciform tension and shear specimen for forming limit acquisition. Journal of Materials Processing Technology, 340, 2025.

[9] 成梓楠. A through-process model for predicting the precipitation evolution and mechanical property of stress-aged Al-Zn-Mg-Cu alloy. INTERNATIONAL JOURNAL OF PLASTICITY, 192, 2025.

[10] 刘明甫. Novel interface characteristics and strengthening mechanisms in extruded fiber(Ti)-reinforced Al-based composites. Journal of Materials Processing Technology, 325, 2024.

[11] 王奎朝. Dynamic evolution of the T1 phase and its effect on continuous dynamic recrystallization in Al–Cu–Li alloys. INTERNATIONAL JOURNAL OF PLASTICITY, 175, 2024.

[12] 成梓楠. Dynamic precipitation and recrystallization behavior during hot deformation of Al-Zn-Mg-Cu alloy: Experiment and modeling. INTERNATIONAL JOURNAL OF PLASTICITY, 178, 2024.

[13] 颜军. Atomic strain concentration induced by interfaces in extruded carbon nanotube reinforced 2024Al matrix composite. Materials Characterization, 214, 2024.

[14] 柳振宇. Achieving the strength-ductility synergy in ultra-fined grained CNT/2024Al composites via a low-temperature aging strategy. COMPOSITES PART B-ENGINEERING, 281, 2024.

[15] 刘明甫. Enhancing strength and ductility of extruded Ti-alloy-reinforced Al-Mg-Si composites: Roles of interface nanostructures and chemical bonding. INTERNATIONAL JOURNAL OF PLASTICITY, 178, 2024.

[16] 李映直. Fatigue crack propagation behavior of 2195 Al-Li alloy plate at low temperature. INTERNATIONAL JOURNAL OF FATIGUE, 196, 2025.

[17] 柳振宇. Re-dissolution behavior of secondary phases and mechanical response of CNT/2024Al composites. Materials Characterization, 207, 2024.

[18] 成梓楠. Formation mechanism of deformation bands considering dynamic precipitation in Al-Zn-Mg-Cu alloy. PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 927, 2025.

[19] 王奎朝. Precipitation behavior and its effect on the dynamic recrystallization of a novel extruded Al-Cu-Li alloy. Materials and design, 223, 2022.

[20] 成梓楠. Coupled crystal plasticity and micromechanics damage model based on viscoplastic self-consistent theory and X-ray computed tomography. INTERNATIONAL JOURNAL OF PLASTICITY, 160, 2023.

[6] 王玉宝. 一种新的耦合GTN模型以精确识别金属板料极限应变的三维M-K模型（英文）. transactions of nonferrous metals society of china, 1-20, 2022.