|
个人信息Personal Information
教授 博士生导师 硕士生导师
性别：男
在职信息：在职
所在单位：材料科学与工程学院
入职时间：2019-03-04
学科：材料科学与工程
办公地点：山大千佛山校区材料学院
扫描关注
- [21] 王雪. Revealing the mechanism of tool tilting on suppressing the formation of void defects in friction stir welding. Journal of Materials Research and Technology, 25, 38-54, 2023.
- [22] 张贤昆. Eliminating root defect in Al/Ti dissimilar friction stir welded via the double-side process. Science and Technology of Welding and Joining, 28, 803, 2023.
- [23] 王雪. Influence of tool pin geometry on the thermal processes and plastic material flow in ultrasonic vibration-enhanced friction stir welding. international Journal of Advanced Manufacturing Technology, 124, 2791, 2023.
- [24] 石磊. 铝/铜异种金属双面搅拌摩擦焊接成形及接头力学性能. 《中国有色金属学报（中国科学院）》, 2022.
- [25] 石磊. Effect of splat cooling on microstructures and mechanical properties of friction stir welded 2195 Al–Li alloy. Materials Science & Engineering A: Structural Mate, 2022.
- [26] 唐九兴. Microstructure and Mechanical Properties of Dissimilar Double-Side Friction Stir Welds Between Medium-Thick 6061-T6 Aluminum and Pure Copper Plates. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2022.
- [27] 李阳. Achieving high property medium-thick Ti/Al dissimilar joints by double side friction stir welding. Science and Technology of Welding and Joining, 2022.
- [28] 石磊. 2195-T6铝锂合金搅拌摩擦焊接头微观组织结构与力学性能. 焊接学报, 2022.
- [29] 唐九兴. 铝/铜异种金属双面搅拌摩擦焊接成形及接头力学性能. 《中国有色金属学报（中国科学院）》, 1-15, 2021.
- [30] 石磊. 铝合金超声辅助搅拌摩擦焊接工艺研究进展. 航空制造技术, 2022.
- [31] 赵俊杰. Effect of ultrasonic field on microstructure evolution in friction stir welding of dissimilar Al/Mg alloys. Journal of Materials Research and Technology, 17, 1, 2022.
- [32] 赵文祯. The influence of acoustic antifriction on heat generation and material flow in ultrasonic-assisted friction stir welding. international Journal of Advanced Manufacturing Technology, 120, 2633, 2022.
- [33] 石磊. 基于搅拌摩擦的金属固相增材制造研究进展. 《材料工程》, 2022.
- [34] 石磊. Prediction of prior austenite grain growth in the heat-affected zone of a martensitic steel during welding. INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2018.
- [35] 石磊. Combined finite element and phase field method for simulation of austenite grain growth in the heat-affected zone of a martensitic steel weld. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Mater, 2019.
- [36] 翟明. Tool tilt angle induced variation of shoulder-workpiece contact condition in friction stir welding. Science and Technology of Welding and Joining, 27, 68, 2022.
- [37] 王涛. CT-based detection of material flow in friction stir welding of dissimilar Al/Mg alloys with and without ultrasonic assistance. Science and Technology of Welding and Joining, 2022.
- [38] 蒋涛. Effects of tool pin thread on temperature field and material mixing in friction stir welding of dissimilar Al/Mg alloys. Journal of Manufacturing Processes, 74, 112, 2022.
- [39] 石磊. Analysis of welding load reduction in ultrasonic vibration-enhanced friction stir welding. international Journal of Advanced Manufacturing Technology, 99, 373, 2018.
- [40] 赵文祯. Acoustic induced antifriction and its effect on thermo-mechanical behavior in ultrasonic assisted friction stir welding. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal, 190, 2021.