sunjie 山东大学主页平台管理系统--Home

Paper Publications

Home >> Scientific Resear... >> Paper Publication...

[101] 路来骁. Investigation on distortion mechanism and correcting load calculation method for aluminum beam st.... Procedia CIRP, 2016.
[102] 路来骁. Study on the surface integrity of a thin-walled aluminum alloy structure after a bilateral slid r.... METALS, 2016.
[103] 孙杰. Evaluation of cutting force and cutting temperature in milling carbon fiber-reinforced polymer co.... international Journal of Advanced Manufacturing Technology, 1517, 2016.
[104] 赵彦华. Study on Crack Sensitivity and Tribological Characterization of Functionally Gradient Material Mu.... International Journal of Surface Science and Engineering, 9, 370, 2015.
[105] 孙杰. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites. Materials Technology, 46, 2015.
[106] 李燕乐. A Brief Review of Forming Forces in Incremental Sheet Forming. Materials Science Forum, 2016.
[107] Saad Waqar. Numerical investigation of thermal behavior and melt pool morphology in multi-track multi-layer s.... international Journal of Advanced Manufacturing Technology, 2021.
[108] Saad Waqar. Effect of post-heat treatment cooling on microstructure and mechanical properties of selective la.... 26, 1739, 2020.
[109] 宋亚男. Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless ste.... PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 793, 2020.
[110] 孙杰. Investigation on performance Characteristics and metallographic transformation on drilling alumin.... JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2019.
[111] 孙杰. Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an a.... Tribology International, 2020.
[112] 孙杰. Investigation on Drilling Performance of Titanium Alloy Ti6Al4V Based on Response Surface Method. 2017.
[113] 孙杰. Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti.... Journal of manufacturing processes, 2018.
[114] 孙杰. Use of Atomized Spray Cutting Fluid Technique for the Turning of a Nickel Base Superalloy. Materials and Manufacturing Processes, 2020.
[115] 周长安. Sound singularity analysis for milling tool condition monitoring towards sustainable manufacturin.... Mechanical Systems and Signal Processing, 157, 2021.
[116] 周长安. An integrated wireless vibration sensing tool holder for milling tool condition monitoring with s.... Measurement: Journal of the International Measurement Confederation, 174, 2021.
[117] 赵艳哲. Surface integrity evolution of machined NiTi shape memory alloys after turning process. 2021.
[118] 许亚鹏. Design and Analysis of a Linear Digital Variable Stiffness Actuator. IEEE Access , 9, 13992, 2021.
[119] 许亚鹏. Design, modeling and control of a reconfigurable variable stiffness actuator. Mechanical Systems and Signal Processing, 2021.
[120] 张一然. Method of Postures Selection for Industrial Robot Joint Stiffness Identification. IEEE Access , 9, 62583, 2021.

total293 6/15

first previous next last Page

Home

Scientific Research

Teaching Research

Awards and Honours

Enrollment Information

Student Information

My Album

Blog

More

Paper Publications

[101] 路来骁. Investigation on distortion mechanism and correcting load calculation method for aluminum beam st.... Procedia CIRP, 2016.

[102] 路来骁. Study on the surface integrity of a thin-walled aluminum alloy structure after a bilateral slid r.... METALS, 2016.

[103] 孙杰. Evaluation of cutting force and cutting temperature in milling carbon fiber-reinforced polymer co.... international Journal of Advanced Manufacturing Technology, 1517, 2016.

[104] 赵彦华. Study on Crack Sensitivity and Tribological Characterization of Functionally Gradient Material Mu.... International Journal of Surface Science and Engineering, 9, 370, 2015.

[105] 孙杰. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites. Materials Technology, 46, 2015.

[106] 李燕乐. A Brief Review of Forming Forces in Incremental Sheet Forming. Materials Science Forum, 2016.

[107] Saad Waqar. Numerical investigation of thermal behavior and melt pool morphology in multi-track multi-layer s.... international Journal of Advanced Manufacturing Technology, 2021.

[108] Saad Waqar. Effect of post-heat treatment cooling on microstructure and mechanical properties of selective la.... 26, 1739, 2020.

[109] 宋亚男. Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless ste.... PROPERTIES MICROSTRUCTURE AND PROCESSING Journal, 793, 2020.

[110] 孙杰. Investigation on performance Characteristics and metallographic transformation on drilling alumin.... JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2019.

[111] 孙杰. Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an a.... Tribology International, 2020.

[112] 孙杰. Investigation on Drilling Performance of Titanium Alloy Ti6Al4V Based on Response Surface Method. 2017.

[113] 孙杰. Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti.... Journal of manufacturing processes, 2018.

[114] 孙杰. Use of Atomized Spray Cutting Fluid Technique for the Turning of a Nickel Base Superalloy. Materials and Manufacturing Processes, 2020.

[115] 周长安. Sound singularity analysis for milling tool condition monitoring towards sustainable manufacturin.... Mechanical Systems and Signal Processing, 157, 2021.

[116] 周长安. An integrated wireless vibration sensing tool holder for milling tool condition monitoring with s.... Measurement: Journal of the International Measurement Confederation, 174, 2021.

[117] 赵艳哲. Surface integrity evolution of machined NiTi shape memory alloys after turning process. 2021.

[118] 许亚鹏. Design and Analysis of a Linear Digital Variable Stiffness Actuator. IEEE Access , 9, 13992, 2021.

[119] 许亚鹏. Design, modeling and control of a reconfigurable variable stiffness actuator. Mechanical Systems and Signal Processing, 2021.

[120] 张一然. Method of Postures Selection for Industrial Robot Joint Stiffness Identification. IEEE Access , 9, 62583, 2021.