(1)Jiang, Zhenxi.
Structural design of groove and micro-blade of the end mill in aluminum alloys machining based on bionics
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2017
,88
(9-12):3343-3356
(2)Sun, Yujing.
Modeling and experimental study of temperature distributions in end milling Ti6Al4V with solid carbide tool
.PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE
.2017
,231
(2):217-227
(3)Liu, Chun.
Investigation on the milling performance of titanium alloy thin-walled part with air jet assistance
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2018
,95
(5-8):2865-2874
(4)Hou, Qiulin.
An online tool wear detection system in dry milling based on machine vision
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2019
,105
(1-4):1801-1810
(5)Sun, Qidong.
Investigation on Mechanical Properties and Energy Absorption Capabilities of AlSi10Mg Triply Periodic Minimal Surface Sheet Structures Fabricated via Selective Laser Melting
.Journal of Materials Engineering and Performance
.2022
(6)Waqar, Saad.
Evolution of residual stress behavior in selective laser melting (SLM) of 316L stainless steel through preheating and in-situ re-scanning techniques
.Optics and Laser Technology
.2022
,149
(7)赵艳哲.
Effect of rare earth oxide on the properties of laser cladding layer and machining vibration suppressing in side milling
.APPLIED SURFACE SCIENCE
.2014
(1)
(8)
Experimental and Taguchi-Based Grey Approach of Laser Metal Deposition Technique on Nickel-Based Superalloy
.TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS
.2019
(1)
(9)刘化强.
Interfacial Characteristics and Mechanical Properties of CuSn15/HT250 Prepared via Additive Manufacturing Combined with an Inconel 718 Interlayer.
.Materials 材料
.2021
,14
(24)
(10)VINOTHKUMAR SIVALINGAM.
Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants
.Tribology International
.2020
,148
(11)VINOTHKUMAR SIVALINGAM.
Machining Behaviour, surface integrity and tool wear analysis in environment friendly turning of Inconel 718 alloy
.Measurement
.2021
,174
(12)VINOTHKUMAR SIVALINGAM.
Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy
.Journal of manufacturing processes
.2018
,32
(0):188
(13)贺伟.
膜片式液压微位移执行器设计与特性分析
.《液压与气动》
.2024
,48
(9):18-24
(14)郑帅.
基于变参数阻抗控制的机器人恒力打磨研究
.制造技术与机床
.2024
(03):9-15
(15)袭建人.
热震对SiC涂层的3D SiC/C-SiC复合材料结构和性能影响
.第六届空天动力联合会议暨中国航天第三专业信息网第四十二届技术交流会暨2021航空发动机技术发展高层论坛
.2022
:139-145
(16)窦振华.
航天电静液伺服系统复合自适应跟踪控制
.《航空学报（中文版）》
.2024
(17)Zan, Zhuoliang.
Investigation of milling performance and removal process mechanism of 3D SiCf/C-SiC composites using brazed diamond tools
.Journal of the European Ceramic Society
.2024
,44
(6):3588-3601
(18)施洋洋.
Effects of process parameters on microstructure properties of WE43 magnesium alloy by selective laser melting
.Materials Today Communications
.2024
,39
(19)王协彬.
Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting
.Additive Manufacturing
.2020
(36):101545
(20)VINOTHKUMAR SIVALINGAM.
Machining Behaviour, surface integrity and tool wear analysis in environment friendly turning of Inconel 718 alloy
.MEASUREMENT
.2024
(1)
(21)VINOTHKUMAR SIVALINGAM.
Investigation of Cryogenically Treated Physical Vapor Deposition TiAlN/NbN-Coated Carbide Inserts in End Milling of Hard Titanium Alloy
.Journal of Testing and Evaluation
.2021
(3)
(22)VINOTHKUMAR SIVALINGAM.
Optimization of Process Parameters for Turning Hastelloy X under Different Machining Environments Using Evolutionary Algorithms: A Comparative Study
.Applied Sciences-Basel
.2021
(20)
(23)VINOTHKUMAR SIVALINGAM.
Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy
.Journal of manufacturing processes
.2018
(1)
(24)VINOTHKUMAR SIVALINGAM.
Use of Atomized Spray Cutting Fluid Technique for the Turning of a Nickel Base Superalloy
.Materials and Manufacturing Processes/ Taylor & Francis
.2021
(3)
(25)VINOTHKUMAR SIVALINGAM.
Optimization of atomized spray cutting fluid eco-friendly turning of Inconel 718 alloy using ARAS and CODAS methods
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2022
(7-8)
(26)VINOTHKUMAR SIVALINGAM.
Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants
.Tribology International
.2020
(1)
(27)VINOTHKUMAR SIVALINGAM.
Identification of tool wear and surface morphology measurements in sustainable milling of Al 6082 hybrid metal matrix composite
.Journal of Materials Research and Technology
.2023
(1)
(28)VINOTHKUMAR SIVALINGAM.
Towards sustainability assessment, energy consumption, and carbon emissions in cryogenic drilling of Alloy 20: a new approach towards sustainable future and challenges
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2024
(3-4)
(29)VINOTHKUMAR SIVALINGAM.
Understanding the machining characteristics of Al6082 hybrid metal matrix composites milled under cryogenic cooling conditions
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2023
(7-8)
(30)VINOTHKUMAR SIVALINGAM.
A mathematical approach of evaluating sustainability indicators in milling of aluminium hybrid composite by different eco-friendly cooling strategies
.Sustainable Materials and Technologies
.2023
,36
(31)高伟睿.
Investigation on tunable low-frequency property of magnetic field induced phononic crystal with Archimedean spiral-beams
.Mechanical Systems and Signal Processing
.2023
,185
(32)周长安.
Effect of deep cryogenic treatment on mechanical properties and residual stress of AlSi10Mg alloy fabricated by laser powder bed fusion
.Journal of Materials Processing Technology
.2022
,303
(33)昝卓良.
Investigation on scratching force and material removal mechanism of 3D SiCf/C–SiC composites during single grain scratching
.Journal of the European Ceramic Society
.2022
(34)Sun, Chao.
Influences of the cutting path about machining performance in manufacturing titanium alloys Ti6Al4V thin-walled components
.International Conference on Machine Design and Manufacturing Engineering (ICMDME 2012)
.2012
,566
:222-226
(35)VINOTHKUMAR SIVALINGAM.
An automotive radiator with multi-walled carbon-based nanofluids: A study on heat transfer optimization using MCDM techniques
.Case Studies in Thermal Engineering
.2022
,29
(36)Zhao, Yanzhe.
Nonlinear Deformation Mechanism of Ni50.8Ti Shape Memory Alloy at Different Temperatures and Strain Rates
.Journal of Materials Engineering and Performance
.2023
(37)孙明建.
Understanding the tool wear mechanism during robotic milling of glass fibre reinforced plastic
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2024
,195
(38)贺伟.
Kinematic Calibration and Compensation of Industrial Robots Based on Extended Joint Space
.IEEE Access
.2023
,11
:109331-109340
(39)国凯.
Set-Membership Adaptive Robot Control With Deterministically Bounded Learning Gains
.IEEE Transactions on Industrial Informatics
.2023
,19
(8):8564-8574
(40)武冲.
Dual PID Adaptive Variable Impedance Constant Force Control for Grinding Robot
.Applied Sciences-Basel
.2023
,13
(21)
(41)杨斌.
Early chatter detection in robotic milling under variable robot postures and cutting parameters
.Mechanical Systems and Signal Processing
.2022
,186
(42)周长安.
Development and testing of a wireless rotating triaxial vibration measuring tool holder system for milling process
.Measurement
.2020
(163)
(43)刘化强.
Interfacial Characteristics and Mechanical Properties of CuSn15/HT250 Prepared via Additive Manufacturing Combined with an Inconel 718 Interlayer
.MATERIALS
.2021
(24)
(44)杨斌.
Towards metamaterial rods with amplitude-dependent band gaps: A superelastic alloy-based approach
.Mechanical Systems and Signal Processing
.2022
(166)
(45)刘江伟.
Effect of scanning speed on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
.Materials and design
.2020
(186)
(46)赵艳哲.
Study on chip formation characteristics in turning NiTi shape memory alloys
.Journal of manufacturing processes
.2020
(1):787
(47)周长安.
Vibration singularity analysis for milling tool condition monitoring
.International Journal of Mechanical Sciences
.2020
,166
(105254)
(48)周长安.
An integrated wireless vibration sensing tool holder for milling tool condition monitoring with singularity analysis
.Measurement
.2021
(174)
(49)朱兆聚.
Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys
.Journal of manufacturing processes
.2018
(34):531
(50)孙齐东.
Compressive mechanical properties and energy absorption characteristics of SLM fabricated Ti6Al4V triply periodic minimal surface cellular structures
.MECHANICS OF MATERIALS
.2022
(166)
(51)宋亚男.
Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
.2020
,793
(139879)
(52)朱兆聚.
Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack
.Journal of Materials Processing Technology
.2018
(259):270
(53)Sui, Shaochun.
Experimental investigation on the performance of novel double cone integrated tool in one-shot drilling of metal stacks
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2020
,109
(1-2):523
(54)国凯.
Investigation on the tool wear model and equivalent tool life in end milling titanium alloy Ti6Al4V
.13th ASME International Manufacturing Science and Engineering Conference
.2018
(55)刘江伟.
Compressive behavior and vibration-damping properties of porous Ti-6Al-4V alloy manufactured by laser powder bed fusion
.Journal of manufacturing processes
.2021
(66):1
(56)隋少春.
Study on Improving Accuracy in Robotic Milling of Aluminum Alloy
.13th ASME International Manufacturing Science and Engineering Conference
.2018
(57)刘江伟.
金属基材料激光增材制造材料体系与发展现状
.激光杂志
.2020
(3):6
(58)Saad Waqar.
Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel
.RAPID PROTOTYPING JOURNAL
.2020
(10):1739
(59)刘化强.
Effect of Nb addition on the microstructure and mechanical properties of Inconel 718 fabricated by laser directed energy deposition
.MATERIALS CHARACTERIZATION Journal
.2022
(183)
(60)许亚鹏.
Design and Analysis of a Linear Digital Variable Stiffness Actuator
.IEEE Access
.2021
(9):13992
(61)周长安.
Sound singularity analysis for milling tool condition monitoring towards sustainable manufacturing
.Mechanical Systems and Signal Processing
.2021
(157)
(62)赵艳哲.
Surface integrity evolution of machined NiTi shape memory alloys after turning process
.ADVANCES IN MANUFACTURING
.2020
(1-1)
(63)许亚鹏.
Design, modeling and control of a reconfigurable variable stiffness actuator
.Mechanical Systems and Signal Processing
.2021
,160
(107883):1
(64)周长安.
Tool condition monitoring in milling using a force singularity analysis approach
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2020
,107
(3-4):1785
(65)Lu, Laixiao.
Study on the generation & redistribution mechanism of residual stress in bilateral rolling correction process for thin-walled parts
.ASME 2017 12th International Manufacturing Science and Engineering Conference, MSEC 2017 collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing
.2017
,1
(66)Huang, Xiaoming.
Experimental investigation of the effect of tool geometry on residual stresses in high speed milling 7050-T7451 aluminium alloy
.International Journal of Surface Science and Engineering
.2015
,9
(4):359-369
(67)Song, Ge.
Approach for modeling accurate undeformed chip thickness in milling operation
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2013
,68
(5-8):1429-1439
(68)Huang, Xiaoming.
Finite element simulation and experimental investigation on the residual stress-related monolithic component deformation
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2015
,77
(5-8):1035-1041
(69)黄晓明.
7050-T7451铝合金预拉伸板材热膨胀系数变化规律及机理
.《中国有色金属学报（中国科学院）》
.2013
,23
(12):3282-3288
(70)孙杰.
航空整体结构件高效高精度加工关键技术研究（下）
.金属加工冷加工
.2008
(17):18-20
(71)Vinothkumar Sivalingam.
An automotive radiator with multi-walled carbon-based nanofluids: A study on heat transfer optimization using MCDM techniques
.Case Studies in Thermal Engineering
.2022
,29
(72)杨斌.
Towards metamaterial rods with amplitude-dependent band gaps: A superelastic alloy-based approach
.Mechanical Systems and Signal Processing
.2022
,166
(73)孙齐东.
Compressive mechanical properties and energy absorption characteristics of SLM fabricated Ti6Al4V triply periodic minimal surface cellular structures
.MECHANICS OF MATERIALS
.2022
,166
(74)刘化强.
Effect of Nb addition on the microstructure and mechanical properties of Inconel 718 fabricated by laser directed energy deposition
.MATERIALS CHARACTERIZATION Journal
.2022
,183
(75)刘化强.
Interfacial Characteristics and Mechanical Properties of CuSn15/HT250 Prepared via Additive Manufacturing Combined with an Inconel 718 Interlayer
.MATERIALS
.2021
,14
(24)
(76)刘江伟.
Understanding the effect of scanning strategies on the microstructure and crystallographic texture of Ti-6Al-4V alloy manufactured by laser powder bed fusion
.Journal of Materials Processing Technology
.2021
,299
(1):117366
(77)王协彬.
Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting
.Additive Manufacturing
.2020
,36
(1):101545
(78)高通.
A high strength AlSi10Mg alloy fabricated by laser powder bed fusion with addition of Alsingle bondTisingle bondCsingle bondB master alloy powders
.Materialia
.2021
,16
(1):101103
(79)朱兆聚.
Investigation on performance characteristics and metallographic transformation on drilling aluminium/titanium sandwich
.JOURNAL OF SANDWICH STRUCTURES & MATERIALS
.2019
,21
(4):1578
(80)刘江伟.
Understanding the effect of scanning strategies on the microstructure and crystallographic texture of Ti-6Al-4V alloy manufactured by laser powder bed fusion
.Journal of Materials Processing Technology
.2022
(299):117366
(81)昝卓良.
Investigation of MQL parameters in milling of titanium alloy
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2021
,116
(1-2):375
(82)许亚鹏.
Design, modeling and control of a reconfigurable variable stiffness actuator
.Mechanical Systems and Signal Processing
.2021
,160
(83)赵艳哲.
Investigation on machinability of NiTi shape memory alloys under different cooling conditions
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2021
,116
(5-6):1913
(84)SAAD WAQAR.
FEM analysis of thermal and residual stress profile in selective laser melting of 316L stainless steel
.Journal of manufacturing processes
.2021
,66
:81
(85)刘江伟.
Compressive behavior and vibration-damping properties of porous Ti-6Al-4V alloy manufactured by laser powder bed fusion
.Journal of Manufacturing Processes
.2021
,66
:1
(86)国凯.
Towards metamaterial rods with amplitude-dependent band gaps: A superelastic alloy-based approach
.Mechanical Systems and Signal Processing
.2021
(166)
(87)许亚鹏.
Design, modeling and control of a reconfigurable variable stiffness actuator
.Mechanical Systems and Signal Processing
.2021
,160
(88)孙福来.
Accurate measurement of CTE of aluminum alloy 7050-T7451 and the impact on thermal deformation analysi
.Advanced Materials research
.2012
,566
(566):476
(89)周军.
Finite Element Analysis of Micro-Cutting Aluminum 7050-T7451 with the Tool Edge Radius Considered
.Advanced Materials research
.2010
(433)
(90)王福增.
Experiments and finite element simulations on micro-milling of aluminum alloy7050-T7451
.Advanced Materials research
.2012
,500
(500):650
(91)苑荣华.
Experimental Study on Surface Roughness and Residual Stress by End Milling 69111 Stainless Stell
.Advanced Materials research
.2010
,97-101
(0):1257
(92)苑荣华.
69111铣削加工参数优化研究
.《工具技术》
.2009
,43
(11):18
(93)黄晓明.
7050--T7451铝合金预拉伸板材热膨胀系数变化规律及机理
.《中国有色金属学报》
.2013
,23
(12):3282
(94)李国超.
Study on Establishment of Helix Flute Mathematic Model of Solid Carbide End Mills
.2nd International Conference on Frontiers of Manufacturing and Design Science (ICFMD 2011)
.2011
(95)孙杰.
残余应力对航空整体结构件加工变形的影响分析
.机械工程学报
.2005
,41
(2):118
(96)孙杰.
Effect of initial residual stress and machining-induced residual stress on the deformation of aluminium alloy plate
.SV-Journal of Mechanical Engineering
.2015
(2)
(97)孙杰.
高速列车车轴-轴承温度特性及弛缓机理
.山东大学学报（工学版）
.2016
(2)
(98)朱兆聚.
Investigation on the influence of tool wear upon chip morphology in end milling titanium alloy Ti6Al4V
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2016
(83（9-12）)
(99)孙玉晶.
钛合金铣削加工刀具磨损有限元预测分析
.机械工程学报
.2016
(5)
(100)孙杰.
TC4 铣削加工的刀具磨损与切削力和振动关系研究
.《兵工学报》
.2015
(1)
(101)路来骁.
基于CATIA/CAA的航空整体结构件温度变形补偿
.航空制造技术
.2015
(3)
(102)黄晓明.
高速铣削7050-T7451铝合金表面粗糙度研究
.中国工程机械学报
.2014
,12
(3)
(103)葛茂杰.
石蜡辅助加固钛合金薄壁件加工质量分析
.航空制造技术
.2013
(10):79
(104)孙杰.
整体式立铣刀参数化设计研究进展与发展趋势
.航空制造技术
.2013
(14):26
(105)李国超.
Study on Helical Groove and Circumferential Cutting Edge Machining Simulation of End Mill
.12th Conference on Machining and Advanced Manufacturing Technology
.2013
(106)Wang Fuzeng.
Experiments and finite element simulations on micro-milling of aluminium alloy7050-T7451
.10th Asia-Pacific Conference on Materials Processing (APCMP 2012)
.2012
(107)孙杰.
Research on machining accuracy in milling Ti6Al4V thin-walled component with paraffin reinforcement
.Applied mechanics and materials
.2012
(1)
(108)刘月萍.
STUDY ON THE INFLUENCE OF DIFFERENT TOOL EDGE RADIUS ON MILLING TI6AL4V
.ASME 2010 International Manufacturing Science and Engineering Conference
.2010
(109)孙杰.
有限元技术在航空整体结构件加工中的应用
.航空制造技术
.2009
,0
(21):48
(110)孙杰.
航空整体结构件高效高精度加工关键技术研究
.金属加工
.2008
,0
(17):18
(111)姜亦涛.
振动时效技术在航空整体结构件变形校正中的应用研究
.山东大学学报（工学版）
.2009
,0
(0):82
(112)孙玉晶.
铣削参数对钛合薄壁件表面粗糙度和让当量的影响
.粉末冶金材料科学与工程
.2021
,15
(6):586
(113)孙杰.
制造过程关键工艺环节的有限元仿真分析
.山东大学学报（工学版）
.2005
,35
(1):17
(114)孙杰.
钛合金整体结构件加工关键技术研究
.山东大学学报（工学版）
.2009
,39
(3):81
(115)孙杰.
Study on Technology Strategies for Guarantee Machining Precision of Large-Scale Integrated Aircraft Parts
.Progress of Machining Technology: With Some Topics in Advanced Manufacturing Technology (ICPMT'2002)
.2002
(116)孙杰.
大型整体结构件数控加工变形校正的关键技术研究
.中国机械工程
.2003
,39
(8):120
(117)孙杰.
隔框类航空整体结构件变形校正关键技术研究
.《浙江大学学报（工学版）》
.2004
,38
(3):352
(118)孙杰.
大型整体结构件数控加工变形的安全校形理论研究
.中国机械工程
.2003
,14
(17):1441
(119)王协彬.
Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting
.Additive Manufacturing
.2020
,36
(120)刘江伟.
Compressive behavior and vibration-damping properties of porous Ti-6Al-4V alloy manufactured by laser powder bed fusion
.Journal of Manufacturing Processes
.2021
(66):1
(121)刘江伟.
Effect of scanning speed on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
.materials and design
.2020
,186
(122)刘江伟.
Effect of scanning speed on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
.Materials and design
.2020
(1)
(123)隋少春.
Experimental investigation on the performance of novel double cone integrated tool in one-shot drilling of metal stacks
.The International Journal of Advanced Manufacturing Technology.
.2020
(1)
(124)隋少春.
Experimental investigation on the performance of novel double cone integrated tool in one-shot drilling of metal stacks
.international Journal of Advanced Manufacturing Technology
.2020
(1)
(125)宋亚男.
Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
.Materials Science & Engineering A: Structural Mate
.2020
(1)
(126)宋亚男.
Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
.MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
.2020
(1)
(127)周长安.
Vibration singularity analysis for milling tool condition monitoring
.International Journal of Mechanical Sciences
.2020
(1)
(128)周长安.
Vibrationsingularityanalysisformillingtoolconditionmonitoring
.International Journal of Mechanical Sciences
.2020
(1)
(129)周长安.
Development and testing of a wireless rotating triaxial vibration measuring tool holder system for milling process
.Measurement
.2020
(1)
(130)赵艳哲.
Study on chip formation characteristics in turning NiTi shape memory alloys
.Journal of manufacturing processes
.2020
(1)
(131)Saad Waqar.
Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel
.Rapid Prototyping Journal
.2020
(1)
(132)刘江伟.
金属基材料激光增材制造材料体系与发展现状
.激光杂志
.2020
,41
(3):6
(133)刘江伟.
金属基材料激光增材制造材料体系与发展现状
.激光杂志
.2020
,41
(3):6
(134)李燕乐.
金属板材数控渐进成形工艺的研究进展
.精密成形工程
.2017
,9
(1)
(135)周长安.
Tool condition monitoring in milling using a force singularity analysis approach
.The International Journal of Advanced Manufacturing Technology.
.2020
(1)
(136)周长安.
Tool condition monitoring in milling using a force singularity analysis approach
.international Journal of Advanced Manufacturing Technology
.2020
(1)
(137)路来骁.
Investigation on distortion mechanism and correcting load calculation method for aluminum beam structure by bilateral rolling process.
.49th CIRP Conference on Manufacturing Systems (CIRP-CMS)
.2016
(138)路来骁.
Study on the surface integrity of a thin-walled aluminum alloy structure after a bilateral slid rolling process.
.METALS
.2016
(5)
(139)孙杰.
Evaluation of cutting force and cutting temperature in milling carbon fiber-reinforced polymer composites.
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2016
(9-12):1517
(140)赵彦华.
Study on Crack Sensitivity and Tribological Characterization of Functionally Gradient Material Multi-layer by Laser Cladding with Powder Mixture of Ni-based Alloy and Tungsten Carbide
.International Journal of Surface Science and Engineering
.2015
,9
(4):370
(141)孙杰.
Roughness modelling analysis for milling of carbon fibre reinforced polymer composites
.Materials Technology
.2015
(A1):46
(142)李燕乐.
A Brief Review of Forming Forces in Incremental Sheet Forming
.Materials Science Forum
.2016
(861)
(143)Saad Waqar.
Numerical investigation of thermal behavior and melt pool morphology in multi-track multi-layer selective laser melting of the 316L steel
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2021
(144)Saad Waqar.
Effect of post-heat treatment cooling on microstructure and mechanical properties of selective laser melting manufactured austenitic 316L stainless steel
.2020
,26
(10):1739
(145)宋亚男.
Effect of scanning strategies on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
.PROPERTIES MICROSTRUCTURE AND PROCESSING Journal
.2020
,793
(146)孙杰.
Investigation on performance Characteristics and metallographic transformation on drilling aluminium/titanium sandwich
.JOURNAL OF SANDWICH STRUCTURES & MATERIALS
.2019
(4)
(147)孙杰.
Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants
.Tribology International
.2020
(1)
(148)孙杰.
Investigation on Drilling Performance of Titanium Alloy Ti6Al4V Based on Response Surface Method
.Proceedings of the ASME 2017 12th International Manufacturing Science and Engineering Conference
.2017
(149)孙杰.
Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy
.Journal of manufacturing processes
.2018
(1)
(150)孙杰.
Use of Atomized Spray Cutting Fluid Technique for the Turning of a Nickel Base Superalloy
.Materials and Manufacturing Processes
.2020
(3)
(151)周长安.
Sound singularity analysis for milling tool condition monitoring towards sustainable manufacturing
.Mechanical Systems and Signal Processing
.2021
,157
(152)周长安.
An integrated wireless vibration sensing tool holder for milling tool condition monitoring with singularity analysis
.Measurement: Journal of the International Measurement Confederation
.2021
,174
(153)赵艳哲.
Surface integrity evolution of machined NiTi shape memory alloys after turning process
.2021
(154)许亚鹏.
Design and Analysis of a Linear Digital Variable Stiffness Actuator
.IEEE Access
.2021
,9
:13992
(155)许亚鹏.
Design, modeling and control of a reconfigurable variable stiffness actuator
.Mechanical Systems and Signal Processing
.2021
(1 - 1)
(156)张一然.
Method of Postures Selection for Industrial Robot Joint Stiffness Identification
.IEEE Access
.2021
,9
:62583
(157)周长安.
Sound singularity analysis for milling tool condition monitoring towards sustainable manufacturing
.Mechanical Systems and Signal Processing
.2021
(157)
(158)周长安.
An integrated wireless vibration sensing tool holder for milling tool condition monitoring with singularity analysis
.MEASUREMENT
.2021
(174)
(159)赵艳哲.
Surface integrity evolution of machined NiTi shape memory alloys after turning process
.ADVANCES IN MANUFACTURING
.2020
(1-1)
(160)许亚鹏.
Design and Analysis of a Linear Digital Variable Stiffness Actuator
.IEEE Access
.2021
(9)
(161)路来骁.
Investigation on hot sizing process based on creep mechanism for laser cladded thin-walled titanium alloy components
.JOURNAL OF LASER APPLICATIONS
.2019
(4)
(162)周长安.
Development and testing of a wireless rotating triaxial vibration measuring tool holder system for milling process
.Measurement: Journal of the International Measurement Confederation
.2020
,163
(163)Sui, Shaochun.
Experimental investigation on the performance of novel double cone integrated tool in one-shot drilling of metal stacks
.international Journal of Advanced Manufacturing Technology
.2020
,109
(1-2):523
(164)周长安.
Tool condition monitoring in milling using a force singularity analysis approach
.international Journal of Advanced Manufacturing Technology
.2020
,107
(3-4):1785
(165)周长安.
Vibration singularity analysis for milling tool condition monitoring
.INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal
.2020
,166
(166)赵艳哲.
Study on chip formation characteristics in turning NiTi shape memory alloys
.Journal of Manufacturing Processes
.2020
,58
:787
(167)王协彬.
Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting
.Additive Manufacturing
.2020
(36)
(168)刘江伟.
Effect of scanning speed on the microstructure and mechanical behavior of 316L stainless steel fabricated by selective laser melting
.Materials and design
.2020
(186)
(169)朱兆聚.
Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys
.Journal of Manufacturing Processes
.2018
,23
:531
(170)朱兆聚.
Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack
.Journal of Materials Processing Technology
.2018
,24
:270
(171)Wang, Haijin.
Modeling and analysis of force prediction in milling process of unidirectional fiber reinforced polymer composites
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2019
,101
(9-12):3073
(172) Vinothkumar Sivalingam.
Experimental investigation of tool wear in cryogenically treated insert during end milling of hard Ti alloy
.Journal of the Brazilian Society of Mechanical Sciences and Engineering
.2019
,41
(2)
(173)侯秋林.
A novel algorithm for tool wear online inspection based on machine vision
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2019
,101
(9-12):2415
(174)张松.
Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2010
,46
(1-4):69
(175)汪海晋.
The effect of cutting temperature in milling of carbon fiber reinforced polymer composites
.COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING
.2016
,91
:380
(176)Li Jianfeng.
Effect of cracked blade distribution on vibration characteristics of centrifugal impeller
.2013 2nd International Conference on Frontiers of Mechanical Engineering and Materials Engineering, MEME 2013
.2013
(177)张一然.
Investigation on the milling performance of amputating clamping supports for machining with industrial robot
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2019
,102
(12):3573
(178)国凯.
A novel energy efficient electro-hydraulic actuation system and its force control design
.ICARM 2018 - 2018 3rd International Conference on Advanced Robotics and Mechatronics
.2018
(179)Li Jianfeng.
Effect of cracked blade distribution on strength of centrifugal impeller
.3rd International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM 2013
.2013
(180)赵艳哲.
Investigation on the effect of laser remelting for laser cladding nickel based alloy
.JOURNAL OF LASER APPLICATIONS
.2019
,31
(2)
(181)刘江伟.
Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting
.Materials Science and Engineering: A
.2019
,766
(182)国凯.
Investigation on the tool wear model and equivalent tool life in end milling titanium alloy TI6AL4V
.2018
(183)路来骁.
Study on the generation & redistribution mechanism of residual stress in bilateral rolling correction process for thin-walled parts
.ASME Int. Manuf. Sci. Eng. Conf., MSEC collocated JSME/ASME Int. Conf. Mater. Process.
.2017
(184)隋少春.
Study on Improving Accuracy in Robotic Milling of Aluminum Alloy
.2018
(185)周长安.
Singularity Analysis of Cutting Force and Vibration for Tool Condition Monitoring in Milling
.IEEE Access
.2019
(7):134113
(186)路来骁.
STUDY ON THE GENERATION AND REDISTRIBUTION MECHANISM OF RESIDUAL STRESS IN BILATERAL ROLLING CORRECTION PROCESS FOR THIN-WALLED PARTS
.12th ASME International Manufacturing Science and Engineering Conference
.2017
(187)Lester.
基于响应曲面法的板料渐进成形最大减薄率预测与分析
.吉林大学学报(工学版)
.2018
(188)皇攀凌.
整体硬质合金立铣刀高速加工钛合金振动分析
.粉末冶金材料科学与工程
.2010
,15
(6):574
(189)朱兆聚.
Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack
.Journal of Materials Processing Technology
.2018
,259
:270
(190)朱兆聚.
Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys
.Journal of manufacturing processes
.2018
,34
:531
(191)刘凯.
Investigation on chip morphology and properties in drilling aluminum and titanium stack with double cone drill
.Int J Adv Manuf Technol
.2018
,94
(5-8):1947
(192)Long, Yangyang.
Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2018
,97
(1-4):13
(193)路来骁.
A theoretical model for load prediction in rolling correction process of thin-walled aeronautic parts
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2017
,92
(9-):4121
(194)朱兆聚.
Investigation on performance characteristics in drilling of Ti6Al4V alloy
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2017
,93
(1-):651
(195)刘春.
聚氨酯泡沫辅助加固钛合金薄壁件铣削性能研究
.航空制造技术
.2017
,NULL
(11):93
(196)黄晓明.
基于刚度与应力演变机制的航空整体结构件加工变形预测理论建模
.机械工程学报
.2017
,53
(09):201
(197)路来骁.
基于能量理论的航空整体结构件滚压变形校正载荷预测方法
.《航空学报》
.2017
,38
(12):305
(198)侯秋林.
基于机器视觉刀具几何参数检测算法与误差分析
.山东大学学报（工学版）
.2017
,47
(04):77
(199)Li Jianfeng.
Study on crack sensitivity and tribological characterisation of functionally gradient material multi-layer by laser cladding with powder mixture of Ni-based alloy and tungsten carbide
.International Journal of Surface Science and Engineering
.2015
,9
(4):370
(200)Li Jianfeng.
纤维增强复合材料钻削分层的研磨检测
.航空制造技术
.2015
(9):73
(201)Li Jianfeng.
Finite element simulation and Experimental investigation on the residual stress related monolithic component deformation.
.2015
,77
(5-8):1035
(202)孙杰.
Process modeling of end mill groove machining based on Boolean method
.2014
(203)孙杰.
Approach for modeling accurate undeformed chip thickness
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2013
(204)皇攀凌.
Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Types of Tools
.Journal of Cleaner Production
.2014
,67
:258
(205)Li Jianfeng.
铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究
.中国激光
.2015
,42
(3):61
(206)Li Jianfeng.
Effect of initial residual stress and machining induced residual stress on the deformation of aluminium alloy plate
.SV-Journal of Mechanical Engineering
.2015
,61
(2):131
(207)Li Jianfeng.
Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials Technology
.Materials Technology
.2015
,30
(A1):A46
(208)Li Jianfeng.
Experimental investigation of the effect of tool geometry on residual stresses in high speed end milling 7050-T7451 aluminium alloy
.International Journal of Surface Science and Engineering
.2015
,9
(4):359
(209)Li Jianfeng.
An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbide tool in high-speed milling Ti6Al4V
.International Journal of Machining and Machinability of Materials
.2015
,17
(3-4):319
(210)Jia Xiujie.
Influence of cutting tool blade passivation on cutting force and surface roughness
.Computer Integrated Manufacturing Systems
.2011
,2011,17
(7):1430
(211)孙杰.
EA4T材料动态力学特性与本构关系模型
.《工具技术》
.2016
(212)孙杰.
An experimental investigation of the influence of cutting parameters on cutting temperature in milling Ti6Al4V by applying semi-artificial thermocouple
.international journal Advanced Manufacturing Technology
.2013
(213)Li Jianfeng.
TC4铣削加工的刀具磨损与切削力和振动关系研究
.《兵工学报》
.2015
,36
(1):144
(214)Li Jianfeng.
KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究
.机械工程学报
.2015
,51
(8):37
(215)孙杰.
Study on chip morphology and milling characteristics of laser cladding layer
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2014
(216)孙杰.
Investigation on delamination morphology during drilling composite laminates
.The International Journal of Advanced Manufacturing
.2014
(217)孙杰.
整体式立铣刀刃磨仿真技术研究现状与发展趋势
.机械工程学报
.2014
(218)孙杰.
Modeling and Analysis of Helical Groove Grinding in End Mill Machining
.Journal of Materials Processing Technology
.2014
(219)孙杰.
Modeling and analysis for clearance machining process of end mills
.2014
(220)孙杰.
An Experimental Investigation of tool geometry on Residual Stresses in High-Speed End Milling 7050-T7451 Aluminum Alloy
.Advances in Mechanical Engineering
.2013
(221)孙杰.
整体式立铣刀三维精确建模与软件实现
.计算机辅助设计与图形学学报》
.2014
(222)孙杰.
Effect of rare earth oxide on the properties of laser cladding layer and machining vibration suppressing in side milling
.Applied Surface Science
.2014
(223)孙杰.
Study on the tribological properties between the aluminum alloy 7050-T7451 and the YG8 cemented carbide
.journal of materials science
.2010
,46
(3):723
(224)皇攀凌.
Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2013
,67
(5-8):1385
(225)皇攀凌.
Vibration analysis in milling titanium alloy based on signal processing of cutting force
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2013
,64
(5-8):613
(226)孙杰.
Influences of cutting path about machining performance in manufacturing titanium alloys Ti6Al4V thin-walled components
.2012
,566
:222
(227)皇攀凌.
Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills
.Key Engineering Materials
.2010
,443
(0):285
(228)Jia Xiujie.
立铣刀高速加工铝合金铣削力试验研究
.《组合机床与自动化加工技术》
.2007
,0
(8):71
(229)Jia Xiujie.
铝合金高速铣削过程切屑成形机制研究
.轻合金加工技术
.2009
,37
(7):52
(230)皇攀凌.
Structure optimization of variable pitch helix end mills based on FEM simulation
.Key Engineering Materials
.2010
,443
(0):291
(231)Jia Xiujie.
刀具钝化对切削力及表面粗糙度的影响
.《计算机集成制造系统》
.2011
,17
(7):1430
(232)皇攀凌.
Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle mill
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2012
,0
(0):1
(233)孙杰.
聚酯人造花岗岩复合材料的研制及工程应用
.《制造技术与机床》
.2006
,0
(8):85
(234)孙杰.
硬质合金立铣刀高速铣削铝合金切屑形成机理研究
.2007
,41
(11):20
(235)孙杰.
石蜡辅助加固钛合金薄壁件铣削稳定性研究
.山东大学学报（工学版）
.2011
,0
(0)
(236)孙杰.
A Comprehensive Study on Surface Integrity by End Milling Ti-6Al-4V
.Journal of Materials Processing Technology
.2009
,0
(0):4036
(237)孙杰.
A New Multi-view Approach to Characterize 3D Chip Morphology and Properties in End Milling Titanium Alloy Ti-6Al-4V
.International Journal of Machine Tools and Manufacture
.2008
,48
(12-13):1486
(238)Li Jianfeng.
Study on chip morphology and milling characteristics of laser cladding layer
.2015
,77
(5-8):783
(239)隋少春.
STUDY ON IMPROVING ACCURACY IN ROBOTIC MILLING OF ALUMINUM ALLOY
.PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 3
.2018
(240)国凯.
INVESTIGATION ON THE TOOL WEAR MODEL AND EQUIVALENT TOOL LIFE IN END MILLING TITANIUM ALLOY TI6AL4V
.PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4
.2018
(241)孙杰.
Modeling of cutting force under the tool flank wear effect in end milling Ti6Al4V with solid carbide tool
.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
.2013
,69
(9-12):2545
(242)Li Jianfeng.
Effect of cracked blade distribution on vibration characteristics of centrifugal impeller
.2013
(243)皇攀凌.
整体硬质合金立铣刀高速加工钛合金振动分析
.粉末冶金材料科学与工程
.2010
,15
(6):574
(244)Li Jianfeng.
Study on crack sensitivity and tribological characterisation of functionally gradient material multi-layer by laser cladding with powder mixture of Ni-based alloy and tungsten carbide
.International Journal of Surface Science and Engineering
.2015
,9
(4):370
(245)Li Jianfeng.
纤维增强复合材料钻削分层的研磨检测
.航空制造技术
.2015
(9):73
(246)Li Jianfeng.
Finite element simulation and Experimental investigation on the residual stress related monolithic component deformation.
.international Journal of Advanced Manufacturing Technology
.2015
,77
(5-8):1035
(247)皇攀凌.
Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Types of Tools
.Journal of Cleaner Production
.2014
,67
:258
(248)Li Jianfeng.
铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究
.《中国激光》
.2015
,42
(3):61
(249)Li Jianfeng.
Effect of initial residual stress and machining induced residual stress on the deformation of aluminium alloy plate
.SV-Journal of Mechanical Engineering
.2015
,61
(2):131
(250)Li Jianfeng.
Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials Technology
.Materials Technology
.2015
,30
(A1):A46
(251)Li Jianfeng.
Experimental investigation of the effect of tool geometry on residual stresses in high speed end milling 7050-T7451 aluminium alloy
.International Journal of Surface Science and Engineering
.2015
,9
(4):359
(252)Li Jianfeng.
An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbide tool in high-speed milling Ti6Al4V
.International Journal of Machining and Machinability of Materials
.2015
,17
(3-4):319
(253)Jia Xiujie.
Influence of cutting tool blade passivation on cutting force and surface roughness
.Computer Integrated Manufacturing Systems
.2011
,2011,17
(7):1430
(254)Li Jianfeng.
TC4铣削加工的刀具磨损与切削力和振动关系研究
.《兵工学报》
.2015
,36
(1):144
(255)Li Jianfeng.
KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究
.机械工程学报
.2015
,51
(8):37
(256)皇攀凌.
Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy
.international Journal of Advanced Manufacturing Technology
.2013
,67
(5-8):1385
(257)皇攀凌.
Vibration analysis in milling titanium alloy based on signal processing of cutting force
.international Journal of Advanced Manufacturing Technology
.2013
,64
(5-8):613
(258)皇攀凌.
Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills
.Key Engineering Materials
.2010
,443
(0):285
(259)Jia Xiujie.
铝合金高速铣削过程切屑成形机制研究
.轻合金加工技术
.2009
,37
(7):52
(260)皇攀凌.
Structure optimization of variable pitch helix end mills based on FEM simulation
.Key Engineering Materials
.2010
,443
(0):291
(261)Jia Xiujie.
刀具钝化对切削力及表面粗糙度的影响
.《计算机集成制造系统》
.2011
,17
(7):1430
(262)皇攀凌.
Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle mill
.international Journal of Advanced Manufacturing Technology
.2012
,0
(0):1
(263)Li Jianfeng.
Study on chip morphology and milling characteristics of laser cladding layer
.international Journal of Advanced Manufacturing Technology
.2015
,77
(5-8):783
(264)赵艳哲.
Investigation on the effect of laser remelting for laser cladding nickel based alloy
.JOURNAL OF LASER APPLICATIONS
.2019
,31
(2)
(265)刘江伟.
Achieving Ti6Al4V alloys with both high strength and ductility via selective laser melting
.Materials Science and Engineering: A
.2019
,766
(266)国凯.
Investigation on the tool wear model and equivalent tool life in end milling titanium alloy TI6AL4V
.2018
(267)路来骁.
Study on the generation & redistribution mechanism of residual stress in bilateral rolling correction process for thin-walled parts
.2017
(268)隋少春.
Study on Improving Accuracy in Robotic Milling of Aluminum Alloy
.2018
(269)周长安.
Singularity Analysis of Cutting Force and Vibration for Tool Condition Monitoring in Milling
.IEEE Access
.2019
(7):134113
(270)张一然.
Investigation on the milling performance of amputating clamping supports for machining with industrial robot
.international Journal of Advanced Manufacturing Technology
.2019
,102
(12):3573
(271)国凯.
A novel energy efficient electro-hydraulic actuation system and its force control design
.2018
(272)路来骁.
STUDY ON THE GENERATION AND REDISTRIBUTION MECHANISM OF RESIDUAL STRESS IN BILATERAL ROLLING CORRECTION PROCESS FOR THIN-WALLED PARTS
.PROCEEDINGS OF THE ASME 12TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2017, VOL 1
.2017
(273)Li Jianfeng.
Effect of cracked blade distribution on vibration characteristics of centrifugal impeller
.2013
(274)Li Jianfeng.
Effect of cracked blade distribution on strength of centrifugal impeller
.2013
(275)Jia Xiujie.
铝合金高速铣削过程切屑成形机制研究
.轻合金加工技术
.2009
,37
(7):52
(276)Lester.
基于响应曲面法的板料渐进成形最大减薄率预测与分析
.吉林大学学报(工学版)
.2018
(277)皇攀凌.
Structure optimization of variable pitch helix end mills based on FEM simulation
.Key Engineering Materials
.2010
,443
(0):291
(278)皇攀凌.
Simulation and optimal selection of Pitch Angles Distribution for Variable Pitch Angles Helix End Mills
.Key Engineering Materials
.2010
,443
(0):285
(279)皇攀凌.
整体硬质合金立铣刀高速加工钛合金振动分析
.粉末冶金材料科学与工程
.2010
,15
(6):574
(280)皇攀凌.
Milling force vibration analysis in high-speed-milling titanium alloy using variable pitch angle mill
.international Journal of Advanced Manufacturing Technology
.2012
,0
(0):1
(281)Jia Xiujie.
刀具钝化对切削力及表面粗糙度的影响
.《计算机集成制造系统》
.2011
,17
(7):1430
(282)Jia Xiujie.
立铣刀高速加工铝合金铣削力试验研究
.《组合机床与自动化加工技术》
.2007
,0
(8):71
(283)Jia Xiujie.
Influence of cutting tool blade passivation on cutting force and surface roughness
.Computer Integrated Manufacturing Systems
.2011
,2011,17
(7):1430
(284)Li Jianfeng.
纤维增强复合材料钻削分层的研磨检测
.航空制造技术
.2015
(9):73
(285)Li Jianfeng.
TC4铣削加工的刀具磨损与切削力和振动关系研究
.《兵工学报》
.2015
,36
(1):144
(286)Li Jianfeng.
KMN钢激光熔覆FeCr合金修复层组织性能及耐磨、耐蚀性研究
.机械工程学报
.2015
,51
(8):37
(287)Li Jianfeng.
铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究
.《中国激光》
.2015
,42
(3):61
(288)Li Jianfeng.
Experimental investigation of the effect of tool geometry on residual stresses in high speed end milling 7050-T7451 aluminium alloy
.International Journal of Surface Science and Engineering
.2015
,9
(4):359
(289)Li Jianfeng.
Finite element simulation and Experimental investigation on the residual stress related monolithic component deformation.
.international Journal of Advanced Manufacturing Technology
.2015
,77
(5-8):1035
(290)Li Jianfeng.
Effect of initial residual stress and machining induced residual stress on the deformation of aluminium alloy plate
.SV-Journal of Mechanical Engineering
.2015
,61
(2):131
(291)Li Jianfeng.
Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials Technology
.Materials Technology
.2015
,30
(A1):A46
(292)Li Jianfeng.
Study on crack sensitivity and tribological characterisation of functionally gradient material multi-layer by laser cladding with powder mixture of Ni-based alloy and tungsten carbide
.International Journal of Surface Science and Engineering
.2015
,9
(4):370
(293)Li Jianfeng.
An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbide tool in high-speed milling Ti6Al4V
.International Journal of Machining and Machinability of Materials
.2015
,17
(3-4):319
(294)Li Jianfeng.
Study on chip morphology and milling characteristics of laser cladding layer
.international Journal of Advanced Manufacturing Technology
.2015
,77
(5-8):783
(295)皇攀凌.
Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Types of Tools
.Journal of Cleaner Production
.2014
,67
:258
(296)皇攀凌.
Study on vibration reduction mechanism of variable pitch end mill and cutting performance in milling titanium alloy
.international Journal of Advanced Manufacturing Technology
.2013
,67
(5-8):1385
(297)皇攀凌.
Vibration analysis in milling titanium alloy based on signal processing of cutting force
.international Journal of Advanced Manufacturing Technology
.2013
,64
(5-8):613
(298)朱兆聚.
Evolution of 3D chip morphology and phase transformation in dry drilling Ti6Al4V alloys
.Journal of manufacturing processes
.2018
,34
:531
(299)刘凯.
Investigation on chip morphology and properties in drilling aluminum and titanium stack with double cone drill
.Int J Adv Manuf Technol
.2018
,94
(5-8):1947
(300)国凯.
INVESTIGATION ON THE TOOL WEAR MODEL AND EQUIVALENT TOOL LIFE IN END MILLING TITANIUM ALLOY TI6AL4V
.PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4
.2018
(301)隋少春.
STUDY ON IMPROVING ACCURACY IN ROBOTIC MILLING OF ALUMINUM ALLOY
.PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 3
.2018
(302)朱兆聚.
Evaluation of novel tool geometries in dry drilling aluminium 2024-T351/titanium Ti6Al4V stack
.Journal of Materials Processing Technology
.2018
,259
:270
(303)Long, Yangyang.
Effects of process parameters on force reduction and temperature variation during ultrasonic assisted incremental sheet forming process
.international Journal of Advanced Manufacturing Technology
.2018
,97
(1-4):13
(304)朱兆聚.
Investigation on performance characteristics in drilling of Ti6Al4V alloy
.international Journal of Advanced Manufacturing Technology
.2017
, 93
(1-):651
(305)路来骁.
基于能量理论的航空整体结构件滚压变形校正载荷预测方法
.《航空学报》
.2017
,38
(12):305
(306)侯秋林.
基于机器视觉刀具几何参数检测算法与误差分析
.山东大学学报（工学版）
.2017
,47
(04):77
(307)刘春.
聚氨酯泡沫辅助加固钛合金薄壁件铣削性能研究
.航空制造技术
.2017
(11):93
(308)路来骁.
A theoretical model for load prediction in rolling correction process of thin-walled aeronautic parts
.international Journal of Advanced Manufacturing Technology
.2017
, 92
(9-):4121
(309)黄晓明.
基于刚度与应力演变机制的航空整体结构件加工变形预测理论建模
.机械工程学报
.2017
,53
(09):201
(310)孙杰.
聚酯人造花岗岩复合材料的研制及工程应用
.《制造技术与机床》
.2006
,0
(8):85
(311)孙杰.
硬质合金立铣刀高速铣削铝合金切屑形成机理研究
.2007
,41
(11):20
(312)孙杰.
石蜡辅助加固钛合金薄壁件铣削稳定性研究
.山东大学学报（工学版）
.2011
,0
(0)
(313)孙杰.
A Comprehensive Study on Surface Integrity by End Milling Ti-6Al-4V
.Journal of Materials Processing Technology
.2009
,0
(0):4036
(314)孙杰.
A New Multi-view Approach to Characterize 3D Chip Morphology and Properties in End Milling Titanium Alloy Ti-6Al-4V
.International Journal of Machine Tools and Manufacture
.2008
,48
(12-13):1486
(315)孙杰.
EA4T材料动态力学特性与本构关系模型
.《工具技术》
.2016
(316)孙杰.
Approach for modeling accurate undeformed chip thickness
.international Journal of Advanced Manufacturing Technology
.2013
(317)孙杰.
An experimental investigation of the influence of cutting parameters on cutting temperature in milling Ti6Al4V by applying semi-artificial thermocouple
.international journal Advanced Manufacturing Technology
.2013
(318)孙杰.
Study on chip morphology and milling characteristics of laser cladding layer
.international Journal of Advanced Manufacturing Technology
.2014
(319)孙杰.
Effect of rare earth oxide on the properties of laser cladding layer and machining vibration suppressing in side milling
.Applied surface science
.2014
(320)孙杰.
An Experimental Investigation of tool geometry on Residual Stresses in High-Speed End Milling 7050-T7451 Aluminum Alloy
.Advances in Mechanical Engineering
.2013
(321)孙杰.
Investigation on delamination morphology during drilling composite laminates
.The International Journal of Advanced Manufacturing
.2014
(322)孙杰.
整体式立铣刀刃磨仿真技术研究现状与发展趋势
.机械工程学报
.2014
(323)孙杰.
Modeling and Analysis of Helical Groove Grinding in End Mill Machining
.Journal of Materials Processing Technology
.2014
(324)孙杰.
Modeling and analysis for clearance machining process of end mills
.Journal of Advanced Manufacturing Technology
.2014
(325)孙杰.
Process modeling of end mill groove machining based on Boolean method
.Journal of Advanced Manufacturing Technology
.2014
(326)孙杰.
整体式立铣刀三维精确建模与软件实现
.计算机辅助设计与图形学学报》
.2014
(327)孙杰.
Modeling of cutting force under the tool flank wear effect in end milling Ti6Al4V with solid carbide tool
.The International Journal of Advanced Manufacturing Technology
.2013
,69
(9-12):2545
(328)孙杰.
Study on the tribological properties between the aluminum alloy 7050-T7451 and the YG8 cemented carbide
.journal of materials science
.2010
,46
(3):723
(329)孙杰.
Influences of cutting path about machining performance in manufacturing titanium alloys Ti6Al4V thin-walled components
.Advanced Materials research
.2012
,566
:222
