孙杰山东大学主页平台管理系统--中文主页

更多

` 中文
- English

孙杰

职称：教授
所在单位：机械工程学院

教师拼音名称：sunjie
入职时间：2004-04-06
所在单位：机械工程学院
性别：男
在职信息：在职
是否在职：1

论文成果

[226] 李剑峰 and 孙杰. Study on chip morphology and milling characteristics of laser cladding layer. international Journal of Advanced Manufacturing Technology, 77, 783, 2015.
[227] 国凯 , 孙杰 and 隋少春. STUDY ON IMPROVING ACCURACY IN ROBOTIC MILLING OF ALUMINUM ALLOY. PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 3, 2018.
[228] 国凯 and 孙杰. INVESTIGATION ON THE TOOL WEAR MODEL AND EQUIVALENT TOOL LIFE IN END MILLING TITANIUM ALLOY TI6AL4V. PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4, 2018.
[229] 孙杰. Modeling of cutting force under the tool flank wear effect in end milling Ti6Al4V with solid carbide tool. The International Journal of Advanced Manufacturing Technology, 69, 2545, 2013.
[230] 王威强 , 孙杰 and 李剑峰. Effect of cracked blade distribution on vibration characteristics of centrifugal impeller. 2013.
[231] 李剑峰 , 孙杰 and 皇攀凌. 整体硬质合金立铣刀高速加工钛合金振动分析. 粉末冶金材料科学与工程, 15, 574, 2010.
[232] 孙杰 and 李剑峰. Study on crack sensitivity and tribological characterisation of functionally gradient material multi-layer by laser cladding with powder mixture of Ni-based alloy and tungsten carbide. International Journal of Surface Science and Engineering, 9, 370, 2015.
[233] 孙杰 and 李剑峰. 纤维增强复合材料钻削分层的研磨检测. 航空制造技术, 73, 2015.
[234] 孙杰 and 李剑峰. Finite element simulation and Experimental investigation on the residual stress related monolithic component deformation.. international Journal of Advanced Manufacturing Technology, 77, 1035, 2015.
[235] 李剑峰 , 孙杰 , 周军 and 皇攀凌. Study on Performance in Dry Milling Aeronautical Titanium Alloy Thin-wall Components with Two Types of Tools. Journal of Cleaner Production, 67, 258, 2014.
[236] 孙杰 and 李剑峰. 铜元素对FeCr合金激光熔覆层性能影响及铣削加工减振机理研究. 《中国激光》, 42, 61, 2015.
[237] 孙杰 and 李剑峰. Effect of initial residual stress and machining induced residual stress on the deformation of aluminium alloy plate. SV-Journal of Mechanical Engineering, 61, 131, 2015.
[238] 孙杰 and 李剑峰. Roughness modelling analysis for milling of carbon fibre reinforced polymer composites, Materials Technology. Materials Technology, 30, A46, 2015.
[239] 孙杰 and 李剑峰. Experimental investigation of the effect of tool geometry on residual stresses in high speed end milling 7050-T7451 aluminium alloy. International Journal of Surface Science and Engineering, 9, 359, 2015.
[240] 孙杰 and 李剑峰. An experimental investigation of element diffusion and mechanical properties of solid WC/Co carbide tool in high-speed milling Ti6Al4V. International Journal of Machining and Machinability of Materials, 17, 319, 2015.

共317条 16/22

首页上页下页尾页页

扫一扫用手机查看