山东大学教师主页孙杰论文成果中文主页

xgC pSH dWN ln6 1uW Y7h LCe iJQ o1f 3zQ Et6 ip8 ZxM D1m n8G xwv 7q2 9ch B3A T71

更多

` 中文
- English

孙杰

职称：教授
所在单位：机械工程学院

教师姓名：孙杰
教师拼音名称：sunjie
入职时间：2004-04-06
所在单位：机械工程学院
性别：男
职称：教授
在职信息：在职
所属院系：机械工程学院

论文成果

[1] Jiang, Zhenxi. Structural design of groove and micro-blade of the end mill in aluminum alloys machining based on bionics. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 88, 3343-3356, 2017.
[2] Sun, Yujing. Modeling and experimental study of temperature distributions in end milling Ti6Al4V with solid carbide tool. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 231, 217-227, 2017.
[3] Liu, Chun. Investigation on the milling performance of titanium alloy thin-walled part with air jet assistance. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 95, 2865-2874, 2018.
[4] Hou, Qiulin. An online tool wear detection system in dry milling based on machine vision. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 105, 1801-1810, 2019.
[5] Sun, Qidong. Investigation on Mechanical Properties and Energy Absorption Capabilities of AlSi10Mg Triply Periodic Minimal Surface Sheet Structures Fabricated via Selective Laser Melting. Journal of Materials Engineering and Performance, 2022.
[6] Waqar, Saad. Evolution of residual stress behavior in selective laser melting (SLM) of 316L stainless steel through preheating and in-situ re-scanning techniques. Optics and Laser Technology, 149, 2022.
[7] 赵艳哲. Effect of rare earth oxide on the properties of laser cladding layer and machining vibration suppressing in side milling. APPLIED SURFACE SCIENCE, 2014.
[8] . Experimental and Taguchi-Based Grey Approach of Laser Metal Deposition Technique on Nickel-Based Superalloy. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019.
[9] 刘化强. Interfacial Characteristics and Mechanical Properties of CuSn15/HT250 Prepared via Additive Manufacturing Combined with an Inconel 718 Interlayer.. Materials 材料, 14, 2021.
[10] VINOTHKUMAR SIVALINGAM. Wear behaviour of whisker-reinforced ceramic tools in the turning of Inconel 718 assisted by an atomized spray of solid lubricants. Tribology International, 148, 2020.
[11] VINOTHKUMAR SIVALINGAM. Machining Behaviour, surface integrity and tool wear analysis in environment friendly turning of Inconel 718 alloy. Measurement, 174, 2021.
[12] VINOTHKUMAR SIVALINGAM. Machining performance and tool wear analysis on cryogenic treated insert during end milling of Ti-6Al-4V alloy. Journal of manufacturing processes, 32, 188, 2018.
[13] 贺伟. 膜片式液压微位移执行器设计与特性分析. 《液压与气动》, 48, 18-24, 2024.
[14] 郑帅. 基于变参数阻抗控制的机器人恒力打磨研究. 制造技术与机床, 9-15, 2024.
[15] 袭建人. 热震对SiC涂层的3D SiC/C-SiC复合材料结构和性能影响. 第六届空天动力联合会议暨中国航天第三专业信息网第四十二届技术交流会暨2021航空发动机技术发展高层论坛, 139-145, 2022.

共 329 条 1/22

首页上一页下一页尾页页

扫一扫用手机查看