登录
|
山东大学
|
English
王桂龙
教授
所属院部:
材料科学与工程学院
访问次数:
次
论文成果
返回中文主页
Formation mechanism of porous structure in plastic parts injected by microcellular injection molding technology with variable mold temperature
所属单位:
材料科学与工程学院
发表刊物:
《材料工程》
全部作者:
王桂龙
第一作者:
王桂龙
论文类型:
基础研究
论文编号:
lw-143564
是否译文:
否
发表时间:
2009-09-01
上一条:
Low-density and structure-tunable microcellular PMMA foams with improved thermal-insulation and compressive mechanical properties
下一条:
Investigation on bubble morphological evolution and plastic part surface quality of microcellular injection molding process based on a multiphase-solid coupled heat transfer model
版权所有 ©山东大学 地址:中国山东省济南市山大南路27号 邮编:250100
查号台:(86)-0531-88395114
值班电话:(86)-0531-88364731 建设维护:山东大学信息化工作办公室
回到顶部