|
个人信息Personal Information
教授 博士生导师 硕士生导师
性别：男
出生日期：1979-07-04
毕业院校：Tohoku University
学历：研究生(博士)毕业
学位：博士生
在职信息：在职
所在单位：机械工程学院
入职时间：2012-04-26
学科：机械制造及其自动化
办公地点：No.1128,Building 7
联系方式：
扫描关注
- [141] 姚鹏 , 黄传真 , 刘含莲 and 朱洪涛. An Experimental Study on Finish Dry Milling of AISI 321 Stainless Steel. Materials science forum, 861, 26, 2016.
- [142] 朱洪涛 , 姚鹏 and 黄传真. Laser-Assisted Waterjet Microgrooving of Silicon Wafers for minimizing heat affected zone. Materials science forum, 861, 133, 2016.
- [143] 朱洪涛 , 姚鹏 , 刘增文 and 黄传真. Study on the effect of standoff distance on processing performance of alumina ceramics in two modes of abrasive waterjet turning patterns. Advanced Materials research, 797, 21, 2013.
- [144] 黄传真 , 朱洪涛 , 姚鹏 and 刘增文. An Experimental research on Abrasive Water Jet Polishing of the hard brittle ceramics. Advanced Materials research, 797, 15, 2013.
- [145] 朱洪涛 , 姚鹏 , 刘增文 and 黄传真. Material removal analysis in the radial-mode abrasive waterjet turning of ceramic materials. International Journal of Abrasive Technology, 6, 298, 2014.
- [146] 黄传真 , 姚鹏 and 朱洪涛. A Study on Erosion of Alumina Wafer in Abrasive Water Jet Machining. Advanced Materials research, 1017, 228, 2014.
- [147] 刘增文 , 朱洪涛 , 黄传真 and 姚鹏. A Study on Erosion Performance of Monocrystalline Silicon in Ultrasonic Vibration-assisted Abrasive Water Jet Machining. Advanced Materials research, 797, 39, 2013.
- [148] 刘含莲 , 黄传真 , 姚鹏 , 刘璐 and 刘雪飞. Al2O3 -SiCw -SiCnp 复合陶瓷刀具材料粉体的 分散混合工艺研究. 《工具技术》, 53, 28, 2019.
- [149] 姚鹏 , 黄传真 and 朱洪涛. 石英玻璃的热辅助高效塑性域干磨削. 《光学精密工程》, 24, 83, 2019.
- [150] 朱洪涛 and 姚鹏. Analytical modeling of surface roughness in precision grinding of particle reinforced metal matrix composites considering nanomechanical response of material. International Journal of Mechanical Sciences, 157-158, 243, 2019.
- [151] 黄传真 , 朱洪涛 and 姚鹏. 石英玻璃的单颗磨粒划擦应力场解析模型及损伤可控磨削机理研究. 《机械工程学报（中文版）》, 54, 191, 2018.
- [152] 姚鹏 , 黄传真 , 朱洪涛 , 邹斌 , 刘含莲 and 朱家豪. A helical interpolation precision truing and error compensation for arc-shaped diamond grinding wheel. international Journal of Advanced Manufacturing Technology, 100, 167, 2019.
- [153] 张振忠. Investigation and modeling of microgrooves generated on diamond grinding wheel by abrasive waterjet based on Box-Behnken experimental design. international Journal of Advanced Manufacturing Technology, 100, 321, 2019.
- [154] 朱洪涛 , 黄传真 , 姚鹏 and 姚阳. On the relations between the specific cutting energy and surface generation in micro-milling of maraging steel. international Journal of Advanced Manufacturing Technology, 585, 2019.
- [155] 朱洪涛 , 黄传真 , 姚鹏 , 刘雪飞 and 刘含莲. Fabrication of TiC TiB2 composite ceramic tool and its cutting performance in turning austenitic stainless steel. Advances in Applied Ceramics, 118, 473, 2019.
- [156] 姚鹏 and 姚阳. Investigation on chip formation and surface integrity in micro end milling of maraging steel. jamt, 2019.
- [157] 刘含莲 , 朱洪涛 , 姚鹏 and 黄传真. An Experimental Study on Finish Dry Milling of AISI 321 Stainless Steel. Materials science forum, 861, 26, 2016.
- [158] 朱洪涛 , 姚鹏 and 黄传真. Laser-Assisted Waterjet Microgrooving of Silicon Wafers for minimizing heat affected zone. Materials science forum, 861, 133, 2016.
- [159] 朱洪涛 , 姚鹏 and 黄传真. Laser-Assisted Waterjet Microgrooving of Silicon Nitride Ceramics with Near Damage-free. Materials science forum, 861, 69, 2016.
- [160] 朱洪涛 , 姚鹏 and 黄传真. A comparison among dry laser ablation and some different water-laser co-machining processes of single crystal silicon carbide.. Materials science forum, 861, 8, 2016.