张存生山东大学主页平台管理系统--中文主页

+

个人信息

张存生

(教授)

教师姓名：张存生
教师拼音名称：zhangcunsheng
入职时间：2008-11-17
所在单位：材料科学与工程学院
性别：男
职称：教授
在职信息：在职

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

[81] 陈良 , 赵国群 , 张存生 and 陈高进. Microstructure evolution during solution treatment of extruded Al-Zn-Mg profile containing a longitudinal weld seam. JOURNAL OF ALLOYS AND COMPOUNDS , 729, 210, 2017.
[82] 陈良 , 赵国群 , 张存生 and 张济枭. Study on solid bonding behavior of AZ31 Mg alloy during porthole die extrusion process. international Journal of Advanced Manufacturing Technology, 93, 2791, 2017.
[83] 陈良 , 赵国群 , 张存生 and 范相坤. Joining of 1060/6063 aluminum alloys based on porthole die extrusion process. Journal of Materials Processing Technology, 250, 65, 2017.
[84] 陈良 , 赵国群 and 张存生. Influence of aging treatment on the microstructure, mechanical properties and anisotropy of hot extruded Al-Mg-Si plate. Materials & Design, 182, 107999, 2019.
[85] 陈良 , 赵国群 and 张存生. Microstructure and mechanical properties of hot extruded Mg-8.89Li-0.96Zn alloy. Results in Physics, 13, 102148, 2019.
[86] 林军 , 陈良 , 管延锦 , 张存生 and 高夫征. Solving 2D Poisson-type equations using meshless SPH method. Results in Physics, 2019.
[87] 陈良 , 赵国群 and 张存生. Investigation on microstructure and mechanical properties of Al–5.50Zn–2.35Mg–1.36Cu alloy fabricated by hot extrusion process. Journal of Materials Research, 34, 3151, 2019.
[88] 陈良 , 赵国群 , 张存生 and 唐建伟. Study on Al/Mg/Al sheet fabricated by combination of porthole die co-extrusion and subsequent hot rolling. JOURNAL OF ALLOYS AND COMPOUNDS , 784, 727, 2019.
[89] 陈良 , 赵国群 , 张存生 and 袁盛伟. Correlation between homogenization treatment and subsequent hot extrusion of Al-Mg-Si alloy. JOURNAL OF MATERIALS SCIENCE Journal, 54, 9843, 2019.
[90] 张存生 , 赵国群 and 陈良. One-time determination of 20 material parameters in a strain-compensated constitutive model and its application in extrusion for an Al-Zn-Mg thin-walled profile. Thin-Walled structures, 135, 65, 2019.
[91] 赵国群 , 陈良 and 张存生. Application and analysis of spread die and flat container in the extrusion of a large-size, hollow and flat-wide aluminum alloy profile. International Journal of Advanced Manufacturing Technology, 94, 4247, 2018.
[92] 陈良 , 赵国群 , 张存生 and 唐建伟. Co-extrusion of dissimilar AA6063/AA7075 by porthole die at various temperatures. JOURNAL OF ALLOYS AND COMPOUNDS, 764, 162, 2018.
[93] 陈良 , 赵国群 and 张存生. Microstructure and texture evolution during porthole die extrusion of Mg-Al-Zn alloy. Journal of Materials Processing Technology, 259, 346, 2018.
[94] 陈良 , 赵国群 and 张存生. Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets. MATERIALS SCIENCE AND ENGINEERING A, 718, 390, 2018.
[95] 陈良 , 赵国群 and 张存生. Microstructure evolution of AZ91 alloy during hot extrusion process with various ram velocity. Vacuum, 150, 136, 2018.
[96] 陈良 , 赵国群 , 张存生 and 李玉强. Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion. JOURNAL OF ALLOYS AND COMPOUNDS, 749, 293, 2018.

共203条 6/13

首页上页下页尾页页