张存生山东大学主页平台管理系统--中文主页

+

个人信息

张存生

(教授)

教师姓名：张存生
教师拼音名称：zhangcunsheng
入职时间：2008-11-17
所在单位：材料科学与工程学院
性别：男
职称：教授
在职信息：在职

论文成果

当前位置: 中文主页 >> 科学研究 >> 论文成果

[97] 张存生 and 赵国群. Numerical and Experimental Investigation on Thermo-mechanical Behavior during Transient Extrusion Process of High-strength 7××× Aluminum Alloy Profile. international Journal of Advanced Manufacturing Technology, 85, 1915, 2016.
[98] 张存生 and 赵国群. Optimization of porthole extrusion dies with the developed algorithm based on finite volume method. international Journal of Advanced Manufacturing Technology, 85, 1901, 2016.
[99] 张存生 and 赵国群. Identification of friction coefficients and strain-compensated？Arrhenius-type constitutive model by two-stage inverse analysis technique. International Journal of Mechanical Sciences, 98, 195, 2015.
[100] 张存生 and 赵国群. Investigation of the influence of the initial groove angle in the M-K model on limit strains and forming limit curves. International Journal of Mechanical Sciences, 98, 59, 2015.
[101] 张存生 , 赵国群 and 管延锦. Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections. international Journal of Advanced Manufacturing Technology, 78, 927, 2015.
[102] 张存生 and 赵国群. Effects of temperature and strain rate on the forming limit curves of AA5086 sheet. Procedia Engineering, 81, 772, 2014.
[103] 张存生 , 赵国群 , 管延锦 and 陈良. State-of-the-art of extrusion welding and proposal of a method to evaluate quantitatively welding quality during three-dimensional extrusion process. Materials and design, 89, 737, 2016.
[104] 赵国群 , 张存生 and 管延锦. Process modeling and die optimization design of aluminum alloy extrusion profiles used in high-speed train. The 11th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2013), 2013.
[105] 赵国群 , 张存生 and 管延锦. Optimal design of second-step welding chamber for a condenser tube extrusion die based on response surface method and genetic algorithm. Materials and Manufacturing Process, 2013.
[106] 赵国群 , 张存生 and 管延锦. Effect of process parameters on die wear behavior of aluminum alloy rod extrusion. Materials and Manufacturing Process, 2013.
[107] 张存生 , 赵国群 and 管延锦. Numerical and experimental research on extrusion process of a three-cavity aluminum profile. AIP Proceeding paper, 2013.
[108] 张存生 and 赵国群. Effect of extrusion stem speed on extrusion process for a hollow aluminum profile. Materials Science and Engineering B, 177, 1691, 2012.
[109] 张存生 , 赵国群 and 管延锦. Optimization of an aluminum profile extrusion process based on Taguchi’s method with S/N analysis. international Journal of Advanced Manufacturing Technology, 60, 589, 2012.
[110] 张存生 , 管延锦 and 赵国群. Design of a multihole porthole die for aluminum tube extrusion. Materials and Manufacturing Processes, 27, 147, 2012.
[111] 张存生. Effects of a strain rate sensitive material on the optimization of an hydroforming process. International Journal of Material Forming, 335, 2008.
[112] 张存生 , 赵国群 and 管延锦. Investigation on effects of die orifice layout on three-hole porthole extrusion of aluminum alloy 6063 tubes. Journal of Materials Engineering and Performance, 22, 1223, 2013.

共192条 7/12

首页上页下页尾页页