• 2016-09 — 2021-06
  山东大学
  机械制造及其自动化
  工学博士学位
• 2012-09 — 2016-06
  山东大学
  机械设计制造及其自动化
  工学学士学位

• 2023-07 — 2500-01
   山东大学 
• 2021-07 — 2023-07
   山东大学 

(1) 俞兆亮.Atomic insights into nano-cutting behavior of single-crystal CuZn alloy.INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal.2025,294 (1):110229

(2) 解振威.Superpixel-based multiple decision-making method for unsupervised defect detection during drilling of CFRCs components.Measurement.2025,256 (C):118374

(3) 张涵.Research progress and application of vibration suppression technologies for damped boring tools.Machines.2025,13 (10):883

(4) 张瑞豪.Intelligent identification of material removal behavior during scratching of 4H-SiC based on acoustic emission sensing and unsupervised deep learning.Materials Science in Semiconductor Processing.2025,190 (1):109358

(5) 王雪鹏.Experimental characterization and formation mechanism of micro/ nano-scale DRX grains in FGH96 machined surface layer.MATERIALS TODAY COMMUNICATIONS.2025,47

(6) 李文倩.干气密封动环表面的螺旋槽纳秒激光制备研究.《中国机械工程(增刊)》.2024

(7) Liu, Annan.Chip breakage assisted by pulsed high-pressure jet during continuous cylindrical turning 42CrMo steel.Journal of manufacturing processes.2024,126 :245-251

(8) 赵金富.Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures.METALS.2024,14 (6)

(9) 郑力睿.A novel correction method to improve the IR measurement accuracy of cutting tool and workpiece temperature.Fourth International Conference on Advanced Optics and Photonics Research in Engineering (AOPR 2024).2024

(10) 江爱胜.Effects of TiAlN Coating Thickness on Machined Surface Roughness, Surface Residual Stresses, and Fatigue Life in Turning Inconel 718.metals.2024 (14)

(11) 赵金富.Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures.metals.2024,662 (14)

(12) 王红.Effects of dealloying surface modification on machinability improvement of NiTi alloy during micro-machining process.Tribology International.2024,195 (1):109608

(13) 辛明泽.干冰颗粒射流冷却铣削Inconel 718切削性能评价研究.航空制造技术.2024,67 (12):79-86

(14) 王红.Microstructure and mechanical properties of NiTi nanoporous structures fabricated with dealloying process.JOURNAL OF ALLOYS AND COMPOUNDS.2023,933

(15) 王红.Research on corrosion behavior and biocompatibility of NiTi alloy processed with combined dealloying and annealing treatment.Surface & Coatings Technology.2024,494

(16) 凌晨.Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys.MATERIALS.2024,17 (3)

(17) 赵金富.Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions.MICROMACHINES.2023,1263 (14)

(18) 赵金富.Modelling for prediction of time-varying heat partition coefficient at coated tool-chip interface in continuous turning and interrupted milling.International Journal of Machine Tools & Manufacture.2019 (147)

(19) 赵金富.One-Dimensional Heat Conduction Inverse Modelling of Heat Flux Generated at Tool Chip Interface in Cutting Inconel 718.IEEE Access .2019 (7):95240

(20) 赵金富.Cutting temperature measurement using an improved two-color infrared thermometer in turning Inconel 718 with whisker-reinforced ceramic tools.Ceramics International.2018 (44):19002

(21) 赵金富.Effects of Thermo-physical properties of Ti0.41Al0.59N coating on transient and steady cutting temperature distributions in coated cemented carbide tools.International Communications in Heat and Mass Transfer.2018 (96):80

(22) 赵金富.Tool coating effects on cutting temperature during metal cutting processes: Comprehensive review and future research directions.Mechanical Systems and Signal Processing.2021 (150)

(23) 赵金富.Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools.MATERIALS.2018 (11)

(24) 赵金富.Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources.INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY.2021 (117)

(25) 赵金富.Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718.Tribology International.2022 (0301-679X)

(26) 赵金富.A comprehensive review of generating, monitoring, evaluating, and controlling particle emissions during machining process.JOURNAL OF MANUFACTURING SYSTEMS.2023 (70)

(27) 赵金富.Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools.JOURNAL OF ADVANCED RESEARCH.2022 (38)

(28) 赵金富.Measurement of temperature-dependent thermal conductivity for PVD Ti0.55Al0.45N ceramic coating by time domain thermo-reflectance method.Ceramics International.2019 (45):8123

(29) 赵金富.PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718.INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER.2020 (163)

(30) 赵金富.Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiAlN coated carbide tools in initial tool wear stage.Journal of manufacturing processes.2020 (56)

1. 一种制备变厚度涂层样块的夹具及其使用方法

2. 一种耦合压痕测试的光纤涡流无损检测装置及测试方法

1. 数据驱动的碳化硅晶圆精密加工过程监测与控制技术, 2025-10-01-2026-10-31

2. 高性能硬韧复合刀具涂层开发, 2025-04-21-2028-03-20

3. 金刚石刀具宏微结构协同设计研究, 2024-12-01-2027-11-30

4. 复合材料表面损伤的光纤涡流同步同位检测技术研究, 2024-12-01-2026-11-30

5. 缸筒加工同轴度不良的改善, 2024-06-15-2025-03-01

6. 可转位刀具夹持稳定性和断屑机理研究-4, 2024-01-01-2026-03-31

7. 耐高温金属间化合物Ti2AlNb高性能切削与热疲劳性能评价, 2023-10-31-2026-12-31

8. （包干项目）涂层刀具的刀-屑接触界面热性能演化规律及其设计, 2022-11-01-2025-12-30

9. （包干项目）新型高速面铣刀强化散热机理与轻量化设计, 2022-09-07-2025-12-31