山东大学教师主页邹斌论文成果中文主页

QlH bec owd Fwh 8aq 682 1le 9rM TU9 DQX Tv3 Lzh zFY 2nx 4kB Tfn T14 t0C r3b pDY

其他栏目

语种
- English

邹斌

教授
性别：男
在职信息：在职
所在单位：机械工程学院
入职时间： 2008-07-01
所属院系：机械工程学院

访问量：

开通时间：..

最后更新时间：..

论文成果

当前位置中文主页 >> 科学研究 >> 论文成果

[41] 王伟. Controlled material removal mode and depth of micro cracks in precision grinding of fused silica - A theoretical model and experimental verification. Ceramics International, 43, 11596-11609, 2017.
[42] 贾天昊. Effect of process parameters on mechanical properties of Inconel718 superalloy fabricated by directional energy deposition. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 128, 2863-2883, 2023.
[43] 陈伟. Research on anti-interference detection of 3D-printed ceramics surface defects based on deep learning. Ceramics International, 49, 22479-22491, 2023.
[44] 王鹏. Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuous-Fiber-Reinforced PEEK Composites. coatings, 12, 2022.
[45] 张广旭. Design, manufacturing and properties of controllable porosity of ceramic filters based on SLA-3D printing technology. Ceramics International, 49, 1009-1019, 2022.
[46] 刘文波. Microstructure Evolution of TiC/Inconel 718 Composites Prepared by Direct Energy Deposition. Advanced Engineering Materials, 2023.
[47] 常京京. Preparation, characterization and coloring mechanism of 3D printed colorful ZrO2 ceramics parts. Materials Today Communications, 33, 2022.
[48] 陈伟. The defect detection of 3D-printed ceramic curved surface parts with low contrast based on deep learning. Ceramics International, 49, 2881-2893, 2022.
[49] 刘继凯. Challenges in topology optimization for hybrid additive-subtractive manufacturing: A review. Computer-Aided Design, 161, 2023.
[50] 庄悦希. Preparation of pre-impregnated continuous carbon fiber reinforced nylon6 filaments and the mechanical properties of 3D printed composites. Materials Today Communications, 35, 2023.
[51] 丁守岭. Hybrid layout and additive manufacturing of continuous carbon/glass fibers reinforced composites, and its effect on mechanical properties. composite structures, 319, 2023.
[52] 刘文波. Effect of TiC Content on Mechanical Properties and Microstructure Evolution of TiC/Inconel 718 Functionally Gradient Materials by Direct Energy Deposition. Advanced Engineering Materials, 2023.
[53] 薛锴. Geometric Structures for Sialon Ceramic Solid End Mills and Its Performance in High-Speed Milling of Nickel-Based Superalloys. coatings, 13, 2023.
[54] 张广旭. The 3D-Printed building and performance of Al2O3 ceramic filters with gradient hole density structures. Ceramics International, 49, 31496-31508, 2023.
[55] . Shear and Tensile Behaviors of Fiber-Reinforced Resin Matrix Composites Printed by the FDM Technology. coatings, 12, 2022.
[56] 陈伟. Research on Curved Parts Surface Quality Detection during Laser-Directed Energy Deposition Based on Blurry Inpainting Network. Advanced Engineering Materials, 2023.
[57] 陈伟. Research on the sustainable measurement of machined surface roughness under the influence of cutting environment. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 127, 4697-4711, 2023.
[58] 陈伟. Study on the Sustainable Detection of Machining Surface Defects under the Influence of Environmental Interference. coatings, 13, 2023.
[59] 丁守岭. Microstructure, mechanical properties and machinability of 316L stainless steel fabricated by direct energy deposition. 国际机械科学, 243, 2023.
[60] 陈清华. SLA-3d printing and compressive strength of PEGDA/nHAP biomaterials. Ceramics International, 2022.

共 310 条 3/16

首页上一页下一页尾页页