邹斌
-
教授
- 性别:男
- 在职信息:在职
- 所在单位:机械工程学院
- 入职时间: 2008-07-01
访问量:
-
[1]
郝松.
loThree dimensional Monte Carlo Simulation of Microstructure Evolution in Presence of Pores for Thre.
457-458,
1567-+,
2012.
-
[2]
刘继凯.
Topology optimisation for vat photopolymerization 3D printing of ceramics with flushing jet accessib.
VIRTUAL AND PHYSICAL PROTOTYPING,
19,
2024.
-
[3]
Jiang, Jingchao.
Special issue on machine learning in additive manufacturing.
International Journal of Computer Integrated Manufacturing,
36,
1255,
2023.
-
[4]
王伟.
Controlled material removal mode and depth of micro cracks in precision grinding of fused silica - A.
Ceramics International,
43,
11596-11609,
2017.
-
[5]
贾天昊.
Effect of process parameters on mechanical properties of Inconel718 superalloy fabricated by directi.
international Journal of Advanced Manufacturing Technology,
128,
2863-2883,
2023.
-
[6]
陈伟.
Research on anti-interference detection of 3D-printed ceramics surface defects based on deep learnin.
Ceramics International,
49,
22479-22491,
2023.
-
[7]
王鹏.
Improvement of Heat Treatment Process on Mechanical Properties of FDM 3D-Printed Short- and Continuo.
coatings,
12,
2022.
-
[8]
张广旭.
Design, manufacturing and properties of controllable porosity of ceramic filters based on SLA-3D pri.
Ceramics International,
49,
1009-1019,
2022.
-
[9]
刘文波.
Microstructure Evolution of TiC/Inconel 718 Composites Prepared by Direct Energy Deposition.
Advanced Engineering Materials,
2023.
-
[10]
常京京.
Preparation, characterization and coloring mechanism of 3D printed colorful ZrO2 ceramics parts.
Materials Today Communications,
33,
2022.
-
[11]
陈伟.
The defect detection of 3D-printed ceramic curved surface parts with low contrast based on deep lear.
Ceramics International,
49,
2881-2893,
2022.
-
[12]
刘继凯.
Challenges in topology optimization for hybrid additive-subtractive manufacturing: A review.
Computer-Aided Design,
161,
2023.
-
[13]
庄悦希.
Preparation of pre-impregnated continuous carbon fiber reinforced nylon6 filaments and the mechanica.
Materials Today Communications,
35,
2023.
-
[14]
丁守岭.
Hybrid layout and additive manufacturing of continuous carbon/glass fibers reinforced composites, an.
composite structures,
319,
2023.
-
[15]
刘文波.
Effect of TiC Content on Mechanical Properties and Microstructure Evolution of TiC/Inconel 718 Funct.
Advanced Engineering Materials,
2023.
-
[16]
薛锴.
Geometric Structures for Sialon Ceramic Solid End Mills and Its Performance in High-Speed Milling of.
coatings,
13,
2023.
-
[17]
张广旭.
The 3D-Printed building and performance of Al2O3 ceramic filters with gradient hole density structur.
Ceramics International,
49,
31496-31508,
2023.
-
[18]
.
Shear and Tensile Behaviors of Fiber-Reinforced Resin Matrix Composites Printed by the FDM Technolog.
coatings,
12,
2022.
-
[19]
陈伟.
Research on Curved Parts Surface Quality Detection during Laser-Directed Energy Deposition Based on .
Advanced Engineering Materials,
2023.
-
[20]
陈伟.
Research on the sustainable measurement of machined surface roughness under the influence of cutting.
international Journal of Advanced Manufacturing Technology,
127,
4697-4711,
2023.