任小平
-
高级实验师
- 性别：女
- 毕业院校：山东大学
- 学历：研究生(博士)毕业
- 学位：博士生
- 在职信息：在职
- 所在单位：机械工程学院
- 入职时间： 2010-07-16
- 所属院系：
机械工程学院
- 办公地点：千佛山校区西配楼
访问量：
-
[1]
张涵.
Research progress and application of vibration suppression technologies for damped boring tools.
Machines,
13,
883,
2025.
-
[2]
张瑞豪.
Intelligent identification of material removal behavior during scratching of 4H-SiC based on acoustic emission sensing and unsupervised deep learning.
Materials Science in Semiconductor Processing,
190,
109358,
2025.
-
[3]
王雪鹏.
Experimental characterization and formation mechanism of micro/ nano-scale DRX grains in FGH96 machined surface layer.
MATERIALS TODAY COMMUNICATIONS,
47,
2025.
-
[4]
任小平.
粉末冶金材料零件刀具优选试验研究.
《组合机床与自动化加工技术》,
1-4+9,
2025.
-
[5]
赵金富.
Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures.
METALS,
14,
2024.
-
[6]
赵金富.
Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures.
metals,
662,
2024.
-
[7]
王兵.
Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process.
Journal of manufacturing processes,
87,
123,
2023.
-
[8]
凌晨.
Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys.
Materials,
17,
2024.
-
[9]
任小平.
Study on the Formation Mechanism of Serrated Chips in the Cutting Process of Powder Metallurgy Superalloys Based on a Modified J-C Constitutive Relation Simulation Model.
coatings,
14,
2024.
-
[10]
赵金富.
Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718.
Tribology International,
2022.
-
[11]
赵金富.
A comprehensive review of generating, monitoring, evaluating, and controlling particle emissions during machining process.
JOURNAL OF MANUFACTURING SYSTEMS,
2023.
-
[12]
赵金富.
Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools.
JOURNAL OF ADVANCED RESEARCH,
2022.
-
[13]
王兵.
Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process.
Journal of manufacturing processes,
123,
2023.
-
[14]
任小平.
Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Parameters Optimization of Turning Superalloy Inconel 718..
Materials,
14,
2021.
-
[15]
赵金富.
Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718.
Tribology International,
171,
2022.
-
[16]
赵金富.
Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools.
JOURNAL OF ADVANCED RESEARCH,
38,
191,
2021.
-
[17]
朱平忠.
Effects of Sequential Operation with Heat Treatment and Mechanical Milling on Work Hardening for Superalloy GH4169.
METALS,
11,
2021.
-
[18]
张世波.
Phase transition and dynamic recrystallization mechanisms of white layer formation during turning superalloy Inconel 718.
Journal of Materials Research and Technology,
15,
5288,
2021.
-
[19]
任小平.
Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Parameters Optimization of Turning Superalloy Inconel 718.
MATERIALS,
14,
2021.
-
[20]
梁晓亮.
Tool wear-induced microstructure evolution in localized deformation layer of machined Ti-6Al-4V.
JOURNAL OF MATERIALS SCIENCE Journal,
55,
3636,
2020.
