- [21] 鲁洋. The cutting performance of saw blades with textured structures on the rake face, main flank face, and secondary flank face. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024.
- [22] 田润洲. EFFECT OF MICRO-TEXTURES AND CrAlSiN COATINGS ON THE FRICTION AND WEAR PROPERTIES OF 316L STAINLESS STEELS IN SEAWATER. surface review and letters, 2024.
- [23] 岳鸿志. Laser Surface Texturing for Ground Surface: Frictional Effect of Plateau Roughness and Surface Textures under Oil Lubrication. Lubricants, 12, 2024.
- [24] 王军燕. Properties of WS2-based multiple-layer films deposited by electrohydrodynamic jet deposition. Materials Today Communications, 40, 2024.
- [25] 张志慧. Wear Performance of Electro-Fluid Mask In Situ Forming TiO2-MoS2 Alternate Coatings Under Different Friction Conditions. TRIBOLOGY LETTERS, 72, 2024.
- [26] 张志慧. Electrofluid in-situ forming MoS2-TiO2 lubricant-hard alternate coatings sintered at different temperatures. Surface & Coatings Technology, 477, 2024.
- [27] 包一琛. Laser micro-cladding in situ forming textured surface to improve the tribological performance. wear, 550-551, 2024.
- [28] 张志慧. Two-step mask in-situ forming (CFx)n-TiO2/ZrO2 alternate coatings with different width ratios by electrohydrodynamic atomization. SURFACES AND INTERFACES, 44, 2024.
- [29] 吴佳星. Synergistic effects of heat-assisted ultrasonic rolling textures and self-lubricating coatings on the friction and wear properties of AISI 52100 steel. Materials Today Communications, 38, 2024.
- [30] 鲁洋. Cutting performance of saw blades with microtextured rougher and finisher sawteeth. ADVANCES IN MANUFACTURING , 2024.
- [31] 包一琛. Thick-film printing of TaS2 soft films on the textured surface to enhance wear life. Surface & Coatings Technology, 476, 2024.
- [32] 鲁洋. The cutting performance of saw blades with textured structures on the rake face, main and secondary flank face. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 131, 4915, 2024.
- [33] 吴佳星. Synergistic effect of heat-assisted ultrasonic rolling textures and self-lubricated coatings on the friction and wear properties of GCr15 steels. Materials Today Communications, 2024.
- [34] 鲁洋. The cutting and sawteeth wear performance of textured saw blades in machining of stainless steel pipes. ADVANCES IN MANUFACTURING, 2024.
- [35] 吴佳星. The tribological properties of PPS-PTFE/SiO2 coatings deposited on the textured surfaces processed by ultrasonic rolling. SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2024.
- [36] 孟莹. Theoretical and numerical studies of micro-textures fabrication by ultrasonic surface rolling process. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 73, 2023.
- [37] 包一琛. Tribological Properties of Bi<sub>2</sub>S<sub>3</sub>/MoS<sub>2</sub> Composite Coatings Deposited on Biomimetic Leaf Vein Textured Surfaces. TRIBOLOGY LETTERS, 71, 2023.
- [38] 王冉. Two-step printing Ni<sub>3</sub>Al/Cr<sub>3</sub>C<sub>2</sub>-Ti<sub>3</sub>SiC<sub>2</su b>/MoS<sub>2</sub> composite films using electrohydrodynamic atomization with a biomimetic shark-skin mask. 628, 2023.
- [39] 吴佳星. Synergistic Effects of Ultrasonic Rolling Textures and PTFE-PPS/SiO<sub>2</sub> Coatings on Dry Friction and Wear Properties of GCr15 Steel Surfaces. ADVANCED ENGINEERING MATERIALS Journal, 2023.
- [40] 王冉. Microstructure and tribological properties of Ni3Al–Cr3C2/Ni3Al micro-laminate composite films fabricated by electrohydrodynamic atomization technique. VACUUM, 200, 2022.
邓建新 (教授)
教授
性别：男
在职信息：在职
所在单位：机械工程学院
入职时间：1990-07-01
所属院系： 机械工程学院
访问量：
最后更新时间：..
最后更新时间：..