教授
性别：男
在职信息：在职
所在单位：机械工程学院
入职时间：1990-07-01
访问量：
最后更新时间：..
-
[1]
岳鸿志.
Laser Surface Texturing for Ground Surface: Frictional Effect of Plateau Roughness and Surface Textures under Oil Lubrication.
Lubricants,
12,
2024.
-
[2]
王军燕.
Properties of WS2-based multiple-layer films deposited by electrohydrodynamic jet deposition.
Materials Today Communications,
40,
2024.
-
[3]
张志慧.
Wear Performance of Electro-Fluid Mask In Situ Forming TiO2-MoS2 Alternate Coatings Under Different Friction Conditions.
TRIBOLOGY LETTERS,
72,
2024.
-
[4]
张志慧.
Electrofluid in-situ forming MoS2-TiO2 lubricant-hard alternate coatings sintered at different temperatures.
Surface & Coatings Technology,
477,
2024.
-
[5]
包一琛.
Laser micro-cladding in situ forming textured surface to improve the tribological performance.
wear,
550-551,
2024.
-
[6]
张志慧.
Two-step mask in-situ forming (CFx)n-TiO2/ZrO2 alternate coatings with different width ratios by electrohydrodynamic atomization.
SURFACES AND INTERFACES,
44,
2024.
-
[7]
吴佳星.
Synergistic effects of heat-assisted ultrasonic rolling textures and self-lubricating coatings on the friction and wear properties of AISI 52100 steel.
Materials Today Communications,
38,
2024.
-
[8]
鲁洋.
Cutting performance of saw blades with microtextured rougher and finisher sawteeth.
ADVANCES IN MANUFACTURING ,
2024.
-
[9]
包一琛.
Thick-film printing of TaS2 soft films on the textured surface to enhance wear life.
Surface & Coatings Technology,
476,
2024.
-
[10]
鲁洋.
The cutting performance of saw blades with textured structures on the rake face, main and secondary flank face.
International Journal of Advanced Manufacturing Technology ,
131,
4915,
2024.
-
[11]
吴佳星.
Synergistic effect of heat-assisted ultrasonic rolling textures and self-lubricated coatings on the friction and wear properties of GCr15 steels.
Materials Today Communications,
2024.
-
[12]
鲁洋.
The cutting and sawteeth wear performance of textured saw blades in machining of stainless steel pipes.
ADVANCES IN MANUFACTURING,
2024.
-
[13]
吴佳星.
The tribological properties of PPS-PTFE/SiO2 coatings deposited on the textured surfaces processed by ultrasonic rolling.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES,
2024.
-
[14]
孟莹.
Theoretical and numerical studies of micro-textures fabrication by ultrasonic surface rolling process.
international Journal of Advanced Manufacturing Technology,
73,
2023.
-
[15]
包一琛.
Tribological Properties of Bi<sub>2</sub>S<sub>3</sub>/MoS<sub>2</sub> Composite Coatings Deposited on Biomimetic Leaf Vein Textured Surfaces.
TRIBOLOGY LETTERS,
71,
2023.
-
[16]
王冉.
Two-step printing Ni<sub>3</sub>Al/Cr<sub>3</sub>C<sub>2</sub>-Ti<sub>3</sub>SiC<sub>2</su b>/MoS<sub>2</sub> composite films using electrohydrodynamic atomization with a biomimetic shark-skin mask.
applied surface science,
628,
2023.
-
[17]
吴佳星.
Synergistic Effects of Ultrasonic Rolling Textures and PTFE-PPS/SiO<sub>2</sub> Coatings on Dry Friction and Wear Properties of GCr15 Steel Surfaces.
ADVANCED ENGINEERING MATERIALS Journal,
2023.
-
[18]
王冉.
Microstructure and tribological properties of Ni3Al–Cr3C2/Ni3Al micro-laminate composite films fabricated by electrohydrodynamic atomization technique.
VACUUM,
200,
2022.
-
[19]
王冉.
Preparation and infrared properties of Ni3Al–Cr3C2 composite films deposited by electrohydrodynamic atomization technology.
Materials Chemistry and Physics,
278,
2022.
-
[20]
Li, Yan.
Surface textures on cemented carbide cutting tools by micro EDM assisted with high-frequency vibration.
international Journal of Advanced Manufacturing Technology,
82,
2157-2165,
2016.
-
版权所有 ©山东大学 地址：中国山东省济南市山大南路27号 邮编：250100
查号台：（86）-0531-88395114
值班电话：（86）-0531-88364731 建设维护：山东大学信息化工作办公室
-
手机版
登录 | 山东大学
