教授
性别：男
在职信息：在职
所在单位：机械工程学院
入职时间：1990-07-01
访问量：
最后更新时间：..
-
[141]
邓建新.
Oxidation behavior and mechanical properties degradation of hot-pressed Al2O3/ZrB2/ZrO2 ceramic composites.
International Journal of Refractory Metals & Hard Materials,
27,
747,
2009.
-
[142]
周军 , 邓建新 and 刘战强.
Intelligent matching of cutting tools with workpiece materials.
Key Engineering Materials,
315-316,
411,
2006.
-
[143]
邓建新.
Influence of negative bias voltage on the mechanical and tribological properties of MoS2/Zr composite films.
Journal of Wuhan University of Technology--Materials Science Edition,
26,
412,
2011.
-
[144]
邓建新.
Microstructure, mechanical properties and tribological performance of TiSiN-WS2 hard-lubricant coatings.
Applied Surface Science,
309,
209,
2014.
-
[145]
邓建新.
Wear mechanisms of Al<sub>2</sub>O<sub>3</sub>/TiC/Mo/Ni ceramic wire-drawing dies.
Materials Science Engineering A,
v 424,
347,
2006.
-
[146]
邓建新.
Friction and wear behaviors of the PVD ZrN coated carbide in sliding wear tests and in machining processes.
wear,
264,
298,
2008.
-
[147]
邓建新.
Development of SiC/(W, Ti)C gradient ceramic nozzle materials for sand blasting surface treatments.
Inter J Refractory Metals & Hard Materials,
25,
130,
2007.
-
[148]
邓建新.
Performance of the self-lubricating textured tools in dry cutting of Ti-6Al-4V.
international Journal of Advanced Manufacturing Technology,
62,
943,
2012.
-
[149]
邓建新.
Sand erosion performance of B<inf>4</inf>C based ceramic nozzles.
Inter J Refractory Metals & Hard Materials,
26,
128,
2008.
-
[150]
邓建新.
Periodic nano-ripples structures fabricated on WC/Co based TiAlN coatings by femtosecond pulsed laser.
SURFACE ENGINEERING,
31,
271,
2015.
-
[151]
邓建新.
Effect of nano-scale textures on cutting performance of WC/Co-based Ti55Al45N coated tools in dry cutting.
International Journal of Refractory Metals and Hard Materials,
51,
35,
2015.
-
[152]
邓建新.
Fabrication and dry cutting performance of Si3N4/TiC ceramic tools reinforced with the PVD WS2/Zr soft-coatings.
Ceramics International,
41,
10261,
2015.
-
[153]
邓建新.
Effect of microscale texture on cutting performance of WC/Co-based TiAlN coated tools under different lubrication conditions.
Applied Surface Science,
326,
107,
2015.
-
[154]
邓建新.
Elevated temperature tribological properties of AlTiN coating up to 700°C.
SURFACE ENGINEERING,
31,
17,
2015.
-
[155]
邓建新.
硬质合金刀具车削氧化铝陶瓷生坯的磨损机理研究.
《工具技术》,
50,
9,
2016.
-
[156]
邓建新.
Effect of micro/nano-textures and burnished MoS2 addition on the tribological properties of PVD TiAlN coatings against AISI 316 stainless steel.
Surface and Coating Technology,
291,
382,
2016.
-
[157]
赵军 , 艾兴 and 邓建新.
A model of the thermal shock resistance parameter for functionally gradient ceramics.
MATERIALS SCIENCE AND ENGINEERING A,
2004.
-
[158]
赵军 , 艾兴 and 邓建新.
陶瓷构件形状对其抗热震性的影响.
机械工程学报,
2004.
-
[159]
邓建新.
Dry cutting performance of tools deposited with TiSiN-WS2/Ti-WS2 coatings.
SURFACE ENGINEERING,
31,
949,
2015.
-
[160]
邓建新.
Surface textures on cemented carbide cutting tools by micro EDM assisted with high frequency vibration.
international Journal of Advanced Manufacturing Technology,
82,
2157,
2016.
-
版权所有 ©山东大学 地址：中国山东省济南市山大南路27号 邮编：250100
查号台：（86）-0531-88395114
值班电话：（86）-0531-88364731 建设维护：山东大学信息化工作办公室
-
手机版
登录 | 山东大学
