李剑峰山东大学主页平台管理系统--中文主页

李剑峰

学位：工学博士学位
职称：教授
所在单位：工程训练中心

教师英文名称：Li Jianfeng
教师拼音名称：Li Jianfeng
出生日期：1963-01-21
入职时间：1985-07-01
所在单位：工程训练中心
学历：博士研究生毕业
办公地点：1.兴隆山校区工程训练中心 2.千佛山校区创新大厦814
性别：男
联系方式：13954168841 ljf@sdu.edu.cn
在职信息：在职
毕业院校：山东工业大学（山东大学）
是否在职：1
博士生导师
硕士生导师

论文成果

[151] 张松 and 李剑峰. Effects of electrolytes pH on morphologies and mechanical properties of α-Al2O3/Ni composite coatings and role of zeta potentials in co-deposition process. Surface & Coatings Technology, 249, 118, 2014.
[152] 张松 and 李剑峰. Tool wear criterion, tool life, and surface roughness during high-speed end-milling Ti-6Al-4V alloy. JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 11, 587, 2010.
[153] 张松 and 李剑峰. Microstructural alteration and microhardness at near-surface of AISI H13 steel by hard milling. Machining Science and Technology, 16, 473, 2011.
[154] 张松 and 李剑峰. Tool life and cutting forces in end milling Inconel 718 under dry and minimum quantity cooling lubrication cutting conditions. Journal of Cleaner Production, 32, 81, 2012.
[155] 张松 , 李剑峰 and 孙杰. Tool wear and cutting forces variation in high-speed end-milling Ti-6Al-4V alloy. international Journal of Advanced Manufacturing Technology, 46, 69, 2010.
[156] 张松 and 李剑峰. Determination of surface and in-depth residual stress distributions induced by hard milling of H13 steel. Production Engineering-Research & Development, 6, 375, 2012.
[157] 张松 and 李剑峰. Saw-tooth chip formation and its effect on cutting force fluctuation in turning of Inconel 718. International Journal of Precision Engineering and Manufacturing, 14, 957, 2013.
[158] 贾秀杰 and 李剑峰. Establishment and Analysis of Erosion Depth Model for Impeller Material FV520B. International Journal of Precision Engineering and Manufacturing-Green Technology, 3, 2016.
[159] 孙杰 , 国凯 , 李剑峰 and 汪海晋. The effect of cutting temperature in milling of carbon fiber reinforced polymer composites. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 91, 380, 2016.
[160] 贾秀杰 and 李剑峰. 离心式空压机内固粒对叶轮磨损的数值模拟. 中南大学学报（自然科学版）, 10, 2013.
[161] 李燕乐 , 李方义 and 李剑峰. Constitutive modeling and deformation analysis for the ultrasonic-assisted incremental forming process. international Journal of Advanced Manufacturing Technology, 2019.
[162] 李剑峰 , 王威强 and 孙杰. Effect of cracked blade distribution on vibration characteristics of centrifugal impeller. Applied Mechanics and Materials, 2013.
[163] 张松 and 李剑峰. Influence of surface functional parameters on friction behavior and elastic–plastic deformation of grinding surface in mixed lubrication state. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 233, 870, 2019.
[164] 张松 , 李剑峰 and 海源. 基于射频识别技术的车间级刀具管理系统研究. 《计算机集成制造系统》, 22, 1907, 2016.
[165] 张松 and 李剑峰. Tool path planning and milling surface simulation for vehicle rear bumper mold. Advances in Mechanical Engineering, 8, 1, 2016.

共485条 11/33

首页上页下页尾页页

扫一扫用手机查看