李剑峰山东大学主页平台管理系统--中文主页

李剑峰

学位：工学博士学位
职称：教授
所在单位：工程训练中心

教师英文名称：Li Jianfeng
教师拼音名称：Li Jianfeng
出生日期：1963-01-21
入职时间：1985-07-01
所在单位：工程训练中心
学历：博士研究生毕业
办公地点：1.兴隆山校区工程训练中心 2.千佛山校区创新大厦814
性别：男
联系方式：13954168841 ljf@sdu.edu.cn
在职信息：在职
毕业院校：山东工业大学（山东大学）
是否在职：1
博士生导师
硕士生导师

论文成果

[76] 许亚鹏. A Novel Rotational Actuator With Variable Stiffness Using S-Shaped Springs. 《IEEE-ASME TRANSACTIONS ON MECHATRONICS》, 26, 2249, 2021.
[77] 孙福来. Accurate measurement of CTE of aluminum alloy 7050-T7451 and the impact on thermal deformation analysi. Advanced Materials research, 566, 476, 2012.
[78] 周军. Finite Element Analysis of Micro-Cutting Aluminum 7050-T7451 with the Tool Edge Radius Considered. Advanced Materials research, 2010.
[79] 王福增. Experiments and finite element simulations on micro-milling of aluminum alloy7050-T7451. Advanced Materials research, 500, 650, 2012.
[80] 苑荣华. Experimental Study on Surface Roughness and Residual Stress by End Milling 69111 Stainless Stell. Advanced Materials research, 97-101, 1257, 2010.
[81] 苑荣华. 69111铣削加工参数优化研究. 《工具技术》, 43, 18, 2009.
[82] 黄晓明. 7050--T7451铝合金预拉伸板材热膨胀系数变化规律及机理. 《中国有色金属学报》, 23, 3282, 2013.
[83] 孙杰. Effect of initial residual stress and machining-induced residual stress on the deformation of aluminium alloy plate. SV-Journal of Mechanical Engineering, 2015.
[84] 朱兆聚. Investigation on the influence of tool wear upon chip morphology in end milling titanium alloy Ti6Al4V. international Journal of Advanced Manufacturing Technology, 2016.
[85] 孙玉晶. 钛合金铣削加工刀具磨损有限元预测分析. 机械工程学报, 2016.
[86] 孙杰. TC4 铣削加工的刀具磨损与切削力和振动关系研究. 《兵工学报》, 2015.
[87] 李国超. Study on Helical Groove and Circumferential Cutting Edge Machining Simulation of End Mill. Key Engineering Materials, 2013.
[88] Wang Fuzeng. Experiments and finite element simulations on micro-milling of aluminium alloy7050-T7451. Advanced Materials Research, 2012.
[89] 孙杰. Research on machining accuracy in milling Ti6Al4V thin-walled component with paraffin reinforcement. Applied mechanics and materials, 2012.
[90] 刘月萍. STUDY ON THE INFLUENCE OF DIFFERENT TOOL EDGE RADIUS ON MILLING TI6AL4V. Proceedings of the 7th International Conference on MicroManufacturing, 2010.

共485条 6/33

首页上页下页尾页页

扫一扫用手机查看