Zhanqiang Liu
Professor
山东大学教授，从事制造工程理论与技术研究，机械工程学院学术委员会主任，山东省高效切削加工工程技术研究中心主任，高效洁净机械制造教育部重点实验室（山东大学）副主任，山东省高等学校高端装备设计制造与刀具技术实验室主任。 国家杰出青年科学基金获得者、国务院政府特殊津贴专家、宝钢优秀教师、山东省泰山学者特聘教授、山东省有突出贡献的中青年专家、教育部新世纪优秀人才、山东省优秀教师、山东省杰出青年科学基金获得者、霍英东教育基金会高等院校青年教... More+
Paper Publications
-
[221] 刘战强. 基于PLS的汽车外覆盖件冲压线运动规划及仿真. 计算机集成制造系统, 2020.
-
[222] 王兵. An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Allo.... International Journal of Precision Engineering and Manufacturing-Green Technology, 7, 35, 2020.
-
[223] 梁晓亮. Tool wear induced modifications of plastic flow and deformed material depth in new generated surf.... Journal of Materials Research and Technology, 9, 10782, 2020.
-
[224] 王兵. 高速切削材料变形及断裂行为对切屑形成的影响机理研究. 金属加工(冷加工), 2018.
-
[225] 刘文韬. 钛合金Ti-6Al-4V高压冷却车削过程有限元分析. 现代制造工程, 2018.
-
[226] 刘战强. Correlation between the microstructure and machinability in machining Al–(5-25)wt.%Si alloys. SAGE Open, 2020.
-
[227] Wang, Bing. Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T.... Journal of manufacturing processes, 27, 114, 2017.
-
[228] 赵建. Plastic flow behavior for machined surface material Ti-6Al-4V with rotary ultrasonic burnishing. Journal of Materials Research and Technology, 9, 2387, 2020.
-
[229] 刘灿宇. TiN刀具涂层抗多次冲击性能研究. 现代制造工程, 2018.
-
[230] Zhang, Peirong. Enhancing surface integrity and corrosion resistance of laser cladded Cr-Ni alloys by hard turnin.... Applied Surface Science, 409, 169, 2017.
-
[231] 郝广超. Thermal contact resistance enhancement with aluminum oxide layer generated on TiAlN-coated tool a.... Surface＆ Coatings Technology, 385, 2020.
-
[232] Teimouri, Reza. An analytical prediction model for residual stress distribution and plastic deformation depth in .... international Journal of Advanced Manufacturing Technology, 111, 127, 2020.
-
[233] 赵金富. One-Dimensional Heat Conduction Inverse Modelling of Heat Flux Generated at Tool-Chip Interface i.... IEEE Access , 7, 95240, 2020.
-
[234] 王情情. Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase tran.... Materials & Design, 119, 208, 2017.
-
[235] 王桂杰. Work hardening influencing on shape memory effect of NiTi alloy by varying milling speeds. SMART MATERIALS & STRUCTURES, 28, 2019.
-
[236] Zhang, Peirong. Correlation between the microstructure and machinability in machining Al-(5-25) wt% Si alloys. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 234, 1173, 2020.
-
[237] 梁晓亮. Sustainability assessment of dry turning Ti-6Al-4V employing uncoated cemented carbide tools as c.... Journal of Cleaner Production, 214, 279, 2019.
-
[238] 王桂杰. Influence of cutting parameters on surface roughness and strain hardening during milling NiTi sha.... international Journal of Advanced Manufacturing Technology, 102, 2211, 2019.
-
[239] 梁晓亮. Multi-pattern failure modes and wear mechanisms of WC-Co tools in dry turning Ti-6Al-4V. Ceramics International, 46, 24512, 2020.
-
[240] 牛金涛. Characteristics of machined surface integrity in face milling Al-Li alloy 2A97 with carbide inser.... international Journal of Advanced Manufacturing Technology, 101, 839, 2019.