Zhanqiang Liu

Professor

Visit:

Biography

       山东大学教授，从事制造工程理论与技术研究，机械工程学院学术委员会主任，山东省高效切削加工工程技术研究中心主任，高效洁净机械制造教育部重点实验室（山东大学）副主任，山东省高等学校高端装备设计制造与刀具技术实验室主任。

       国家杰出青年科学基金获得者、国务院政府特殊津贴专家、宝钢优秀教师、山东省泰山学者特聘教授、山东省有突出贡献的中青年专家、教育部新世纪优秀人才、山东省优秀教师、山东省杰出青年科学基金获得者、霍英东教育基金会高等院校青年教师基金获得者、第十一届山东省优秀科技工作者、山东省优秀博士后、山东省优秀研究生指导教师、上银优秀博士论文指导教师、山东省优秀学位论文指导教师、山东大学第十四届“我心目中的好导师”、Highly Cited Chinese Researchers（Elsevier）。

           山东大学  刘战强（https://www.mech.sdu.edu.cn/info/1127/121139.htm)

Education Background

• 1987-09-01-1991-07-01
  山东工业大学
  机械设计及制造
• 1991-07-01-1994-07-01
  山东工业大学
  机械制造
• 1995-10-01-1999-11-01
  香港城市大学
  机械制造工艺与设备

Work Experience

• 2025-06 — Now
  山东大学（威海）副校长，低空科学与工程学院院长 
  特聘教授
• 2023-12 — 2025-06
  山东大学（威海）副校长，机电与信息工程学院院长 
  特聘教授
• 2000-09 — Now
  机械工程学院山东大学机械工程学院
• 1999-09 — 2001-09
  山东大学
• 1994-07 — 1995-10
  山东工业大学机械工程系

Publication

Research direction

1. 先进加工理论与装备技术：制造科学与刀具技术；结构表面功能化设计与加工；增减材复合加工工艺与装备；加工过程监控与智能制造

Papers

(1)俞兆亮. Atomic insights into nano-cutting behavior of single-crystal CuZn alloy .INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal .2025 ,294 (1):110229

(2)解振威. A Novel Superpixel Segmentation Method Based on Adaptive Seed Expansion Random Walk Algorithm Toward Complex Scene Images Processing .《IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT》 .2025 ,74 (1):1

(3)解振威. Superpixel-based multiple decision-making method for unsupervised defect detection during drilling of CFRCs components .Measurement .2025 ,256 (C):118374

(4)张瑞豪. Intelligent identification of material removal behavior during scratching of 4H-SiC based on acoustic emission sensing and unsupervised deep learning .Materials Science in Semiconductor Processing .2025 ,190 (1):109358

(5)赵旺. Comprehensive insights into electrical properties enhancement of boron？sulfur co-doped diamond via ion implantation: First principles calculation and experimental validation .Diamond and Related Materials .2025 ,157 (1):112513

(6)王雪鹏. Experimental characterization and formation mechanism of micro/ nano-scale DRX grains in FGH96 machined surface layer .MATERIALS TODAY COMMUNICATIONS .2025 ,47

(7)Lyu, Wenjun. A novel analytical model for predicting ploughing effect on machined wall surface topography considering tool wear during slot milling process .Journal of manufacturing processes .2024 ,127 :9-26

(8)Zhang, Donglin. Cryogenic assisted femtosecond laser ablation of polycrystalline diamond .Diamond and Related Materials .2024 ,144

(9)Zhang, Zhicheng. Effect of plastic deformation of particle and substrate on metallurgical bonding during cold spraying .materials letters .2024 ,373

(10)任小平. 粉末冶金材料零件刀具优选试验研究 .《组合机床与自动化加工技术》 .2025 (03):1-4+9

(11)张泽文. Mechanism-informed prediction of γ-TiAl alloy mechanical behavior via molecular dynamics and explainable machine learning .MATERIALS TODAY COMMUNICATIONS .2025 ,48

(12)杜宜聪. Influence of strain rate-dependent grain boundary on mechanical property and machinability of IN718 via adaptive micro-cutting simulation .Machining Science and Technology .2025

(13)张陆杰. HAMA/GelMA-based hydrogel microneedle patch via DLP 3D bioprinting for high-efficiency ISF extraction .INTERNATIONAL JOURNAL OF PHARMACEUTICS .2025 ,680

(14)陈杰. Finite-frequency dynamic outputtime delay feedback control for chatter mitigation in turning .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2025 (2)

(15)孙鑫鹏. Quantitative analysis of milling chatter severity based on image-signal multi-modal data fusion .Journal of manufacturing processes .2025 (2)

(16)房晓辉. An intelligent tool wear monitoring model based on knowledge-data-driven physical-informed neural network for digital twin milling .Mechanical Systems and Signal Processing .2025 ,232

(17)Zhang, Chuanqi. Investigation of Surface Integrity of Conical Hole in Laser Polishing 440C Stainless Steel .METALS .2024 ,14 (1)

(18)李文倩. 干气密封动环表面的螺旋槽纳秒激光制备研究 .《中国机械工程(增刊)》 .2024

(19)Puthanveettil Madathil, Abhilash. Intrinsic and post-hoc XAI approaches for fingerprint identification and response prediction in smart manufacturing processes .JOURNAL OF INTELLIGENT MANUFACTURING .2024

(20)Liu, Annan. Chip breakage assisted by pulsed high-pressure jet during continuous cylindrical turning 42CrMo steel .Journal of manufacturing processes .2024 ,126 :245-251

(21)Ma, Kai. How does the uncut chip thickness affect the deformation states within the primary shear zone during metal cutting? .International Journal of Machine Tools & Manufacture .2024 ,199

(22)王超. Investigation on multi-pulse femtosecond laser scribing of copper: Analysis of ablation grooves development and modeling modification .Materials and design .2024 ,241

(23)Wang, Xin. Synthesis of Cu2O Nanoparticles by Ellipse Curve Micromixer .ACS Omega .2023 ,8 (32):29758-29769

(24)蔡玉奎. Enhancement of tribological performance with Laser surface texturing: A review .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY .2024 ,4 (94)

(25)赵祥洋. Bauschinger effect in nano-grinding of 3C-SiC: A molecular dynamics study .wear .2025

(26)赵金富. Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures .METALS .2024 ,14 (6)

(27)李坤於. An interpretable thread quality classification model for real-time inspection of tapping process .Measurement .2025 ,245

(28)房晓辉. Intelligent monitoring system for production lines in smart factories: A hybrid method integrating Transformer and Kalman filter .JOURNAL OF MANUFACTURING SYSTEMS .2025 ,79 :27-47

(29)李振民. Self-sensing sliding mode control of workpiece chatter based on accurate prediction of machining vibration .Journal of Sound and Vibration .2025 ,600

(30)秦靖. A task-cooperative drilling monitoring method based on heterogeneous multi-task learning: Task adaptive fusion guided by domain knowledge .Mechanical Systems and Signal Processing .2025 ,225

(31)彭业振. Toward high-performance machining of thin-walled parts: Fusion of parallel spatial-temporal information in high-speed milling for monitoring tool wear .Measurement .2025 ,248

(32)张泽文. First-principles investigation on the brittleness mechanism of TiAl alloys and the effect of doping .Journal of Materials Research and Technology .2025 ,35 :836-852

(33)李坤於. Geometric parameters optimization of tap via response surface methodology and nondominated sorting dung beetle optimization algorithm .《Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering》 .2025

(34)宫吉祥. Systematic error reduction in laser triangulation OMM: A study on measurement parameters and compensation techniques .Measurement .2025 ,247

(35)陈杰. Single-sensor-based reconstruction of force and displacement fields for thin-walled cylindrical shells milling .International Journal of Machine Tools and Manufacture .2025 (1)

(36)陈龙. Thermal conductivity and anti-corrosion of epoxy resin based composite coatings doped with graphene and graphene oxide .Composites Part C .2021 (5)

(37)王晨. Milling Chatter Control in Low Immersion Condition with an Active Electromagnetic Tool Holder System .MICROMACHINES .2025 (3)

(38)郑力睿. A novel correction method to improve the IR measurement accuracy of cutting tool and workpiece temperature .Fourth International Conference on Advanced Optics and Photonics Research in Engineering (AOPR 2024) .2024

(39)江爱胜. Effects of TiAlN Coating Thickness on Machined Surface Roughness, Surface Residual Stresses, and Fatigue Life in Turning Inconel 718 .metals .2024 (14)

(40)赵金富. Effects of PVD CrAlN/(CrAlB)N/CrAlN Coating on Pin–Disc Friction Properties of Ti2AlNb Alloys Compared to WC/Co Carbide at Evaluated Temperatures .metals .2024 ,662 (14)

(41)王红. Effects of dealloying surface modification on machinability improvement of NiTi alloy during micro-machining process .Tribology International .2024 ,195 (1):109608

(42)张瑞豪. Strain rate effect on material deformation and removal behavior during high speed scratching of 4H‐SiC .Tribology International .2023 ,187 (1):108756

(43)辛明泽. 干冰颗粒射流冷却铣削Inconel 718切削性能评价研究 .航空制造技术 .2024 ,67 (12):79-86

(44)Wang, Hong. Effects of dealloying surface modification on machinability improvement of NiTi alloy during micro-machining process .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2024 ,195

(45)Zhang, Ruihao. Polytypic transformation behavior from 4H-SiC to 3C-SiC during high-speed scratching of single crystalline silicon carbide .materials letters .2024 ,357

(46)王红. Microstructure and mechanical properties of NiTi nanoporous structures fabricated with dealloying process .JOURNAL OF ALLOYS AND COMPOUNDS .2023 ,933

(47)王兵. Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process .Journal of manufacturing processes .2023 ,87 :123

(48)王红. Research on corrosion behavior and biocompatibility of NiTi alloy processed with combined dealloying and annealing treatment .Surface & Coatings Technology .2024 ,494

(49)熊龙杰. Research on a new method of macro-micro platform linkage processing for large-format laser precision machining .MICROMACHINES .2025 (2)

(50)房晓辉. A dual knowledge embedded hybrid model based on augmented data and improved loss function for tool wear monitoring .ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING .2025 ,92

(51)杨欣宇. Milling chatter suppression based on the model predictive optimal control with Kalman state estimation .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2024 ,135 (5-6):2829-2846

(52)王小娟. Chatter Stability Prediction for Deep-Cavity Turning of a Bent-Blade Cutter .Sensors .2024 ,24 (2)

(53)杨佩菁. Numerical modeling and simulation for microneedles drug delivery: A novel comprehensive swelling-obstruction-mechanics model .European Journal of Pharmaceutics and Biopharmaceutics .2025 ,206

(54)王润琼. Milling surface roughness monitoring using real-time tool wear data .国际机械科学 .2025 ,285

(55)宋清华. 铣削加工测力刀柄参数优化设计研究 .《电子机械工程》 .2023 ,39 (3):1-5

(56)刘为向. Saturation-Tolerant Predefined Space-Time Super Twisting Control and Its Application to Piezoelectric Fast Steering Mirror .《IEEE-ASME TRANSACTIONS ON MECHATRONICS》 .2024

(57)肖志新. Real-Time milling tool breakage monitoring based on multiscale standard deviation diversity entropy .国际机械科学 .2023 ,240

(58)郭中义. Design and analysis of a compliant microgripper with a large amplification ratio .Microsystem Technologies .2023

(59)李振民. Chatter suppression techniques in milling processes:A state of the art review .CHINESE JOURNAL OF AERONAUTICS .2024 ,37 (7):1-23

(60)王小娟. 考虑移动边界约束作用的薄壁件铣削动特性研究 .《机械科学与技术》 .2024

(61)姜立平. Design and application of grooved grinding head for improving the machined surface quality of ceramic composites .Ceramics International .2024

(62)于锡潼. Surface integrity analysis of Si3N4 under cryogenic assisted femtosecond laser ablation .Ceramics International .2024

(63)杨佩菁. Dual cross-linking mechanism of sodium alginate composite hydrogel for adhesive microneedle patch preparation .Colloids and Surfaces A .2024 ,700

(64)冀寒松. Micro-milling machinability prediction for crystalline materials via numerical-analytical hybrid modelling and strain rate-dependent grain-scale simulation .Journal of manufacturing processes .2024 ,124 :972-984

(65)凌晨. Dynamic Mechanical Properties and Modified Johnson-Cook Model Considering Recrystallization Softening for Nickel-Based Powder Metallurgy Superalloys .Materials .2024 ,17 (3)

(66)任小平. Study on the Formation Mechanism of Serrated Chips in the Cutting Process of Powder Metallurgy Superalloys Based on a Modified J-C Constitutive Relation Simulation Model .coatings .2024 ,14 (8)

(67)王润琼. Toward digital twins for high-performance manufacturing: Tool wear monitoring in high-speed milling of thin-walled parts using domain knowledge .ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING .2024 ,88

(68)童佳威. Synergy of Al2O3/GO hybrid nanofluids: Molecular dynamics perspective on dispersion/adsorption evolution and its tribological validation .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2024 ,193

(69)肖志新. A novel cross-domain tool breakage monitoring method based on locality preserving joint transfer with intra-class compactness .Journal of manufacturing processes .2024 (20)

(70)韩高威. Model-Free Finite Frequency H∞ Control for Active Chatter Suppression in Turning .Journal of Sound and Vibration .2024 (12)

(71)赵金富. Comparison of Surface Morphology and Tool Wear in the Machining of Ti-6Al-4V Alloys with Uncoated and TiAlN Tools under Dry, Minimum Quantity Lubrication, Flood Cooling, and Low-Temperature Spray Jet Cooling Conditions .MICROMACHINES .2023 ,1263 (14)

(72)Singh, Tejinder Pal. Abrasive Wear Behavior of Cryogenically Treated Boron Steel (30MnCrB4) Used for Rotavator Blades .MATERIALS .2020 ,13 (2)

(73)Jamil, Muhammad. Milling of Ti-6Al-4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,107 (9-10):4141

(74)Khanna, Navneet. Optimization of Power Consumption Associated with Surface Roughness in Ultrasonic Assisted Turning of Nimonic-90 Using Hybrid Particle Swarm-Simplex Method .MATERIALS .2019 ,12 (20)

(75)王冬琦. Cutting characteristics of porcine tenderloin tissue along tangential direction of surface .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2018 ,98 (1-4):17

(76)石佳昊. On the segmentation-driven vibration in milling titanium alloy .Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engine .2018 ,34 (9):1508

(77)彭业振. A tool wear condition monitoring method for non-specific sensing signals .国际机械科学 .2023

(78)冀寒松. Episodes of single-crystal material removal mode and machinability in the micro-cutting process of superalloy Inconel-718 .Journal of Materials Research and Technology .2023 ,24 :2074-2085

(79)曹诚. Fiber orientation effects on grinding characteristics and removal mechanism of 2.5D Cf/SiC composites .CHINESE JOURNAL OF AERONAUTICS .2023

(80)付辉. Automatic detection and pixel-level quantification of surface microcracks in ceramics grinding: An exploration with Mask R-CNN and TransUNet .Measurement .2024 ,224

(81)李振民. Chatter suppression mechanism and parameters configuration of the spindle speed variation with piecewise characteristics .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2022 ,122 (7-8):3041-3055

(82)彭业振. Intelligent recognition of tool wear in milling based on a single sensor signal .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2022 ,124 (3-4):1077-1093

(83)王润琼. A milling tool wear monitoring method with sensing generalization capability .JOURNAL OF MANUFACTURING SYSTEMS .2023 ,68 :25-41

(84)冀寒松. Grain-scale material removal mechanisms of crystalline material micro-cutting .国际机械科学 .2022 ,233

(85)王润琼. Self-adaptive fusion of local-temporal features for tool condition monitoring: A human experience free model .Mechanical Systems and Signal Processing .2023 ,195

(86)孟芳汀. Influence of unilateral constraint on machining dynamics of large overhang milling cutter .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2023 ,125 (7-8):3577-3591

(87)王润琼. 基于特征自适应融合和集成学习的高性能铣削刀具状态监测 .机械工程学报 .2023 :1-9

(88)李振民. Response prediction of cantilever plates via mode superposition method and combination method of beam functions .Mechanical Systems and Signal Processing .2023 ,200

(89)冀寒松. Inconel-718微构件晶粒尺度伪随机建模与仿真 .机械工程学报 .2023 (17):1-9

(90)付辉. Grinding surface roughness prediction for silicon nitride ceramics: A dynamic grinding force and frequency domain approach .Ceramics International .2023

(91)高帆. Influence of Biocompatible Hydrophilic Coated Needle on Puncture Process through a Simulation Method .4th CIRP Conference on Biomanufacturing, CIRP-BioM 2019 .2020 ,89 :214-221

(92)冀寒松. Microstructure and machinability evaluation in micro milling of selective laser melted Inconel 718 alloy .Journal of Materials Research and Technology .2021 ,14 :348-362

(93)高帆. 医用穿刺针表面特性对穿刺过程的影响研究 .机械工程学报 .2021 ,57.0 (11.0):44-51

(94)王小娟. Dynamic model and stability prediction of thin-walled component milling with multi-modes coupling effect .Journal of Materials Processing Technology .2021 ,288

(95)Khan, Aqib Mashood. Energy-based cost integrated modelling and sustainability assessment of Al-GnP hybrid nanofluid assisted turning of AISI52100 steel .Journal of Cleaner Production .2020 ,257

(96)Singh, Gurraj. Progress for sustainability in the mist assisted cooling techniques: a critical review .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,109 (1-2):345

(97)Munish Kumar Gupta. Machinability investigations of hardened steel with biodegradable oil-based MQL spray system .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,108 (3):735

(98)冀寒松. A pseudorandom based crystal plasticity finite element method for grain scale polycrystalline material modeling .MECHANICS OF MATERIALS .2020 ,144

(99)Munish Kumar Gupta. Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy .Journal of Cleaner Production .2020 ,251

(100)Munish Kumar Gupta. Tribological behavior of textured tools in sustainable turning of nickel based super alloy .Tribology International .2021 ,155

(101)Munish Kumar Gupta. Ecological, economical and technological perspectives based sustainability assessment in hybrid-cooling assisted machining of Ti-6Al-4 V alloy .Sustainable Materials and Technologies .2020 ,26

(102)Munish Kumar Gupta. Impact of layer rotation on micro-structure, grain size, surface integrity and mechanical behaviour of SLM Al-Si-10Mg alloy .Journal of Materials Research and Technology .2020 ,9 (5):9506

(103)王小娟. Precise chatter monitoring of thin-walled component milling process based on parametric time-frequency transform method .Journal of Materials Processing Technology .2020 ,283

(104)李星. Gallium-based liquid metal hybridizing MoS₂ nanosheets with reversible rheological characteristics and enhanced lubrication properties .RSC advances .2023 ,13 (29):20365

(105)卢业忠. Real-time chatter detection based on fast recursive variational mode decomposition .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2023 (12)

(106)王一顺. Analyzing the performance of self-developed cermet micro end mills in machining of TC4 alloy micro-grooves .5th International Conference on Mechanics and Mechatronics Research (ICMMR) .2018 ,71 :424-428

(107)王腾. Fabrication of hierarchical micro/nanotopography on bio-titanium alloy surface for cytocompatibility improvement .Journal of Materials Science .2016 (21)

(108)万熠. Construction and characterization of micro/nano-topography on titanium alloy formed by micro-milling and anodic oxidation .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2017 (98)

(109)夏岩. Bifurcation and？chaos analysis for？a？spur gear pair system with？friction .Journal of the Brazilian Society of Mechanical Sciences and Engineering .2018 (529)

(110)王腾. Construction of a bioactive surface with micro/nano-topography on titanium alloy by micro-milling and alkali-hydrothermal treatment .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE .2016 (1086-1095)

(111)万熠. Osteogenic and antibacterial ability of micro-nano structures coated with ZnO on Ti-6Al-4V implant fabricated by two-step laser processing .JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY .2022 (131)

(112)王桂森. Incorporation of antibacterial ions on the micro/nanostructured surface and its effects on the corrosion behavior of titanium .Materials letters .2018 ,11 (216)

(113)任冰. Morphologically modified surface with hierarchical micro-/nano-structures for enhanced bioactivity of titanium implants .Journal of Materials Science .2018 (3)

(114)王腾. Effects of Superimposed Micro/Nano-Structured Titanium Alloy Surface on Cellular Behaviors In Vitro .Advanced Engineering Materials .2016 ,18 (7):1259-1266

(115)Wang, Qingqing. Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high-speed machining .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2016 ,82 (9-12):1725-1736

(116)Zhang Rui. Fabrication of Micro/Nano-textured Titanium Alloy Implant Surface and Its Influence on Hydroxyapatite Coatings .JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION .2016 ,31 (2):440-445

(117)夏岩. Development of a toolholder with high dynamic stiffness for mitigating chatter and improving machining efficiency in face milling .Mechanical Systems and Signal Processing .2020 ,145

(118)夏岩. Improvement of Milling Stable Processing Condition for a Cutter With Large Ratio of Length to Diameter .IEEE Access .2020 ,8 :200420

(119)夏岩. Chatter suppression in large overhang face milling using a toolholder with high dynamic performance .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,108 (5-6):1713

(120)夏岩. An improved numerical integration method to predict the milling stability based on the Lagrange interpolation scheme .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021 ,116 (7-8):2111

(121)张晓. Preparation of Superhydrophobic Surface on Titanium Alloy via Micro-Milling, Anodic Oxidation and Fluorination .MICROMACHINES .2020 ,11 (3)

(122)夏岩. Dynamic characteristics analysis of locomotive traction gear pair system under internal and external excitations .Engineering Computations (Swansea, Wales) .2020 ,37 (8):2587

(123)夏岩. Milling stability prediction based on the hybrid interpolation scheme of the Newton and Lagrange polynomials .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021 ,112 (5-6):1501

(124)王宏卫. The biomechanical effects of Ti versus PEEK used in the PLIF surgery on lumbar spine: a finite element analysis .COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING .2021

(125)王宏卫. Porous fusion cage design via integrated global-local topology optimization and biomechanical analysis of performance .Journal of the Mechanical Behavior of Biomedical Materials .2020 ,112

(126)于明志. 3D Printed Ti-6Al-4V Implant with a Micro/Nanostructured Surface and Its Cellular Responses .ACS Omega .2020 ,5 (49):31738

(127)王桂森. Corrosion Behavior of Titanium Implant with different Surface Morphologies .45th SME North American Manufacturing Research Conference (NAMRC) .2017 ,10 :363

(128)陈杰. Finite-frequency H∞ control for active chatter suppression in turning .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2023 (20)

(129)卢业忠. An interpretable anti-noise convolutional neural network for online chatter detection in thin-walled parts milling .Mechanical System and Signal Processing .2023 (20)

(130)李星. Gallium-based liquid metal hybridizing MoS2 nanosheets with reversible rheological characteristics and enhanced lubrication properties .RSC advances .2023 (卷13期29):20365

(131)赵金富. Modelling for prediction of time-varying heat partition coefficient at coated tool-chip interface in continuous turning and interrupted milling .International Journal of Machine Tools & Manufacture .2019 (147)

(132)赵金富. One-Dimensional Heat Conduction Inverse Modelling of Heat Flux Generated at Tool Chip Interface in Cutting Inconel 718 .IEEE Access .2019 (7):95240

(133)赵金富. Cutting temperature measurement using an improved two-color infrared thermometer in turning Inconel 718 with whisker-reinforced ceramic tools .Ceramics International .2018 (44):19002

(134)赵金富. Effects of Thermo-physical properties of Ti0.41Al0.59N coating on transient and steady cutting temperature distributions in coated cemented carbide tools .International Communications in Heat and Mass Transfer .2018 (96):80

(135)赵金富. Tool coating effects on cutting temperature during metal cutting processes: Comprehensive review and future research directions .Mechanical Systems and Signal Processing .2021 (150)

(136)赵金富. Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools .材料（materials） .2018 (11)

(137)赵金富. Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021 (117)

(138)赵金富. Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718 .Tribology International .2022 (0301-679X)

(139)赵金富. A comprehensive review of generating, monitoring, evaluating, and controlling particle emissions during machining process .JOURNAL OF MANUFACTURING SYSTEMS .2023 (70)

(140)赵金富. Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools .JOURNAL OF ADVANCED RESEARCH .2022 (38)

(141)赵金富. Measurement of temperature-dependent thermal conductivity for PVD Ti0.55Al0.45N ceramic coating by time domain thermo-reflectance method .Ceramics International .2019 (45):8123

(142)赵金富. PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718 .INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER .2020 (163)

(143)赵金富. Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiAlN coated carbide tools in initial tool wear stage .Journal of manufacturing processes .2020 (56)

(144)刘为向. Saturation-Tolerant Predefined Space-Time Super Twisting Control and Its Application to Piezoelectric Fast Steering Mirror .《IEEE-ASME TRANSACTIONS ON MECHATRONICS》 .2023 (4)

(145) On scheduled space-time convergence: sliding mode control through the scheduled time function .International Journal of Control, Automation and Systems .2023 (4)

(146)郭中义. Design and analysis of a compliant microgripper with a large amplification ratio .MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS .2023 (4)

(147)孙雨彤. A Novel Rate-Dependent Direct Inverse Preisach Model with Input Iteration for Hysteresis Compensation of Piezoelectric Actuators .International Journal of Control, Automation, and Systems .2023 (20)

(148)陈庆辉. Mechanism of laser-chemical process to remove of oxide layer and formation of periodic microstructures for drag reduction .SURFACES AND INTERFACES .2022 (35)

(149)唐一平. Fabrication of superhydrophobic stainless steel via hybrid femtosecond laser-chemical method with wear-resistance and anti-corrosion properties .Optics and Laser Technology .2023 (164)

(150)陈庆辉. Periodically oriented superhydrophobic microstructures prepared by laser ablation-chemical etching process for drag reduction .Applied Surface Science .2023 (615)

(151)王兵. Effects of tool angles and uncut chip thickness on consumption of plastic deformation energy during machining process .Journal of manufacturing processes .2023 (87):123

(152)王红. Microstructure and mechanical properties of NiTi nanoporous structures fabricated with dealloying process .JOURNAL OF ALLOYS AND COMPOUNDS .2023 (933)

(153)卢业忠. An early chatter detection method based on multivariate variational mode decomposition and chatter correlation factor .《IEEE-ASME TRANSACTIONS ON MECHATRONICS》 .2022 (6)

(154)肖志新. Real-Time milling tool breakage monitoring based on multiscale standard deviation diversity entropy .INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES Journal .2023 (1)

(155)马海峰. Predefined-Time Barrier Function Adaptive Sliding-Mode Control and Its Application to Piezoelectric Actuators .IEEE Transactions on Industrial Informatics .2022 (12)

(156)王兵. A rate-dependent damage model to characterize dynamic fracture behavior of Ti6Al4V under high strain rate loading .Engineering fracture mechanics .2022 ,274 (1):108781

(157)解振威. Optimizing amplitude to improve machined surface quality in longitudinal ultrasonic vibration-assisted side milling 2.5D C/SiC composites .composite structures .2022 ,297 (1):115963

(158)Su, Guosheng. Wear Characteristics of Cutting Tool in Brittle Removal of a Ductile Meta in High-Speed Machining .SYMMETRY-BASEL .2021 ,13 (9)

(159)赵有乐. Multi-scale modeling method for polycrystalline materials considering grain boundary misorientation angle .Materials and design .2022 ,221

(160)冀寒松. Evaluation and prediction of pore effects on single-crystal mechanical and damage properties of selective laser melted Inconel-718 .Materials and design .2022 ,219

(161)郑涛. Development of Tool Wear Standards and Wear Mechanism for Micro Milling Ti-6Al-4V Alloy .METALS .2022 ,12 (5)

(162)吕宗凯. Three-dimensional Modeling and Simulation of Muscle Tissue Puncture Process .Chinese Journal of Mechanical Engineering (English Edition) .2022 ,35 (1)

(163)任小平. Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Parameters Optimization of Turning Superalloy Inconel 718. .Materials .2021 ,14 (9)

(164)肖志新. Real-Time milling tool breakage monitoring based on multiscale standard deviation diversity entropy .International Journal of Mechanical Sciences .2022 (10.1016/j.ijmecsci.2022.107929)

(165)万熠. 未来刀具:先进切削刀具及未来趋势 .Hangkong Gongyi Jishu/Aeronautical Manufacturing Technology .2014 (12):38-43

(166)卢业忠. An early chatter detection method based on multivariate variational mode decomposition and chatter correlation factor .IEEE/ASME TRANSACTIONS ON MECHATRONICS .2022 (early access)

(167)赵金富. Modelling for prediction of time-varying heat partition coefficient at coated tool-chip interface in continuous turning and interrupted milling .International Journal of Machine Tools and Manufacture .2019 ,147 (103467)

(168)赵金富. Investigation of Cutting Temperature during Turning Inconel 718 with (Ti,Al)N PVD Coated Cemented Carbide Tools .材料（materials） .2018 ,11 (1281):1

(169)赵金富. Cutting temperature measurement using an improved two-color infrared thermometer in turning Inconel 718 with whisker-reinforced ceramic tools .Ceramics International .2018 ,44 (0):19002

(170)赵金富. Effects of Thermo-physical properties of Ti0.41Al0.59N coating on transient and steady cutting temperature distributions in coated cemented carbide tools .International Communications in Heat and Mass Transfer .2018 ,96 (0):80

(171)赵金富. PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718 .INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER .2020 ,163 (0)

(172)赵金富. Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021 ,117 (3-4):1117

(173)赵金富. Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiAlN coated carbide tools in initial tool wear stage .Journal of manufacturing processes .2020 ,56 (0)

(174)赵金富. One-Dimensional Heat Conduction Inverse Modelling of Heat Flux Generated at Tool- Chip Interface in Cutting Inconel 718 .IEEE ACCESS .2019 ,7 (0):95228

(175)赵金富. Effects of Al content in TiAlN coatings on tool wear and cutting temperature during dry machining IN718 .Tribology International .2022 ,171 (0)

(176)赵金富. Coating-thickness-dependent physical properties and cutting temperature for cutting Inconel 718 with TiAlN coated tools .JOURNAL OF ADVANCED RESEARCH .2021 ,38 (0):191

(177)赵金富. Measurement of temperature-dependent thermal conductivity for PVD Ti0.55Al0.45N ceramic coating by time domain thermo-reflectance method .Ceramics International .2019 ,45 (0):8123

(178)朱平忠. Effects of Sequential Operation with Heat Treatment and Mechanical Milling on Work Hardening for Superalloy GH4169 .METALS .2021 ,11 (9)

(179)张世波. Phase transition and dynamic recrystallization mechanisms of white layer formation during turning superalloy Inconel 718 .Journal of Materials Research and Technology .2021 ,15 :5288

(180)王鑫. Vortices degradation and periodical variation in spiral micromixers with various spiral structures .INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER .2022 ,183

(181)赵金富. Tool coating effects on cutting temperature during metal cutting processes: Comprehensive review and future research directions .Mechanical Systems and Signal Processing .2021 ,150

(182)王情情. Visco-plastic self-consistent modeling of crystallographic texture evolution related to slip systems activated during machining Ti-6AL-4V .JOURNAL OF ALLOYS AND COMPOUNDS .2021 ,853

(183)李国英. Intermetallic compounds Cr3Te4/NiNbTe2 formation during infiltrating Te into Inconel 718 .MATERIALS LETTERS Journal .2022 ,310

(184)姚共厚. Numerical prediction and experimental investigation of residual stresses in sequential milling of GH4169 considering initial stress effect .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2022 ,119 (11-12):7215

(185)殷庆安. Heat transfer enhancement with surface-active thermal conductive media coating during orthogonal cutting Inconel 718 .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2022

(186)Kundu, Pradeep. A machine learning-based framework for automatic identification of process and product fingerprints for smart manufacturing systems .Journal of manufacturing processes .2022 ,73 :128

(187)解振威. Longitudinal amplitude effect on material removal mechanism of ultrasonic vibration-assisted milling 2.5D C/SiC composites .Ceramics International .2021 ,47 (22):32144

(188)刘凯. Effects of the inclination angles of DLC end face micro-texture on the tribological properties of dry gas seal rings .SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES .2021 ,9 (4)

(189)梁晓亮. Prediction of residual stress with multi-physics model for orthogonal cutting Ti-6Al-4V under various tool wear morphologies .Journal of Materials Processing Technology .2021 ,288

(190)张志成. The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction .MATERIALS .2022 ,15 (6)

(191)胡健睿. Theoretical Modeling and Analysis of Directional Spectrum Emissivity and Its Pattern for Random Rough Surfaces with a Matrix Method .SYMMETRY-BASEL .2021 ,13 (9)

(192)王宏卫. Multiscale design and biomechanical evaluation of porous spinal fusion cage to realize specified mechanical properties .BIO-DESIGN AND MANUFACTURING .2022 ,5 (2):277

(193)蔡玉奎. Formation mechanism of superhydrophobicity of stainless steel by laser-assisted decomposition of stearic acid and its corrosion resistance .Optics and Laser Technology .2022 (153)

(194)Gupta, Munish Kumar. Experimental characterisation of the performance of hybrid cryo-lubrication assisted turning of Ti-6Al-4V alloy .Tribology International .2021 ,153

(195)冀寒松. Geometry-considered 3D pseudorandom grain-scale modelling for crystalline material miniature parts .materials and design .2021 ,210

(196)蔡文通. Dual-phase morphology distribution effects on mechanical behaviors of Ti6Al4V via pseudorandom crystal plasticity modeling .Journal of Materials Research and Technology .2022 ,17 :2897

(197)杜宜聪. Prediction of micro milling force and surface roughness considering size-dependent vibration of micro-end mill .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2022 ,119 (9-10):5807

(198)Gupta, Munish Kumar. A review on conventional and advanced minimum quantity lubrication approaches on performance measures of grinding process .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021

(199)马海峰. Predefined-Time Barrier Function Adaptive Sliding-Mode Control and Its Application to Piezoelectric Actuators .IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS .2022 (early access)

(200)高帆. Influence of a Biocompatible Hydrophilic Needle Surface Coating on a Puncture Biopsy Process for Biomedical Applications .COATINGS .2020 ,10 (2)

(201)Gupta, Munish Kumar. Environment and economic burden of sustainable cooling/lubrication methods in machining of Inconel-800 .Journal of Cleaner Production .2021 ,287

(202)Gupta, Munish Kumar. Tribological performance based machinability investigations in cryogenic cooling assisted turning of alpha-beta titanium Alloy .Tribology International .2021 ,160

(203)王小娟. Active vibration control of thin-walled milling based on ANFIS parameter optimization .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021 ,114 (1-2):563

(204)秦赟. Dynamic Response Analysis of a Thin Plate with Partially Constrained Layer Damping Optimization under Moving Loads for Various Boundary Conditions .Applied Sciences-Basel .2021 ,11 (7)

(205)王润琼. Multi-condition identification in milling Ti-6Al-4V thin-walled parts based on sensor fusion .Mechanical Systems and Signal Processing .2022 ,164

(206)王润琼. A Novel Unsupervised Machine Learning-Based Method for Chatter Detection in the Milling of Thin-Walled Parts .Sensors .2021 ,21 (17)

(207)王小娟. Position-Dependent Stability Prediction for Multi-Axis Milling of the Thin-Walled Component with a Curved Surface .Applied Sciences-Basel .2020 ,10 (24)

(208)殷庆安. Machinability improvement of Inconel 718 through mechanochemical and heat transfer effects of coated surface-active thermal conductive mediums .JOURNAL OF ALLOYS AND COMPOUNDS .2021 ,876

(209)赵建. Surface texture and friction property of Ti-6Al-4V processed by rotary ultrasonic rolling .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021 ,115 (1-2):463

(210)潘家豪. Constrained layer damping treatment of a model support sting .航空学报（英文版） .2021 ,34 (8):58

(211)Niu, Jintao. Novel combination of indicators to compare the corrosion behaviors of Al, Al-Li alloy 2A97, and other Al alloys .MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION .2021

(212)李国英. Effect of oxygen on Te infiltration into superalloy Inconel 718 at elevated temperature .Surface＆ Coatings Technology .2021 ,415

(213)赵金福. Analytical prediction of transient and steady cutting temperature distributions in coated tools under time-varied heat sources .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021

(214)殷庆安. Machinability improvement of Inconel 718 through mechanochemical and heat transfer effects of coated surface-active thermal conductive mediums .JOURNAL OF ALLOYS AND COMPOUNDS .2021 ,876

(215)刘欣恬. Optimization of thermal and hydrophobic properties of GO-doped epoxy nanocomposite coatings .NANOTECHNOLOGY REVIEWS .2021 ,10 (1):1236

(216)任俊杰. Study on the heat transfer reinforcement of glass fiber/epoxy resin composites by grafting and dispersing graphene oxide .Composites Science and Technology .2021 ,216 (1)

(217)陈龙. Optimization of thermal and hydrophobic properties of GO-doped epoxy nanocomposite coatings .NANOTECHNOLOGY REVIEWS .2021 ,10 (1):1236

(218)陈龙. An experimental investigation on heat transfer performance of rotating anti-/deicing component .Applied thermal engineering .2020 ,177 (1)

(219)王一顺. The micro-cutting performance of cermet and coated WC micro-mills in machining of TC4 alloy micro-grooves .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2018 ,96 (1-4):1403

(220)张帅. Edge passivation and quality of carbide cutting inserts treated by wet micro-abrasive blasting .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2018 ,96 (5-8):2307

(221)马海峰. Saturated adaptive barrier sliding mode control with state-dependent uncertainty limit .IET Contorl Theory and Applications .2021 ,15 (13):1762

(222)马海峰. Disturbance estimator-based switching function for discrete-time sliding mode control systems with control saturation .Transactions of the Institute of Measurement and Control .2021 ,43 (12):2715

(223)陈龙. Graphene Nanoarchitectonics: A New Material Horizon for Reinforcement of Sustainable Polymers .Frontiers in Materials .2020 ,7 (1)

(224)陈龙. Microstructure simulation and heat transfer optimization for graphene oxide doped anti-/deicing composites .Composites Science and Technology .2021 ,213 (1)

(225)陈龙. Mathematical modeling of heat transfer in GO-doped reinforce polymer for anti-/deicing of wind turbines .International Communications in Heat and Mass Transfer .2021 ,123

(226)任小平. Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Parameters Optimization of Turning Superalloy Inconel 718 .MATERIALS .2021 ,14 (9)

(227)姜佳明. Formation mechanism of tearing defects in machining Nomex honeycomb core .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2021 ,112 (11-12):3167

(228)李国英. Effect of element Te on alterations of microstructure and mechanical property of nickel-based superalloy Inconel 718 through alloy infiltration .Applied Surface Science .2021 ,544

(229)Liu, Yang. Stochastic Cutting Force Modeling and Prediction in Machining .JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME .2020 ,142 (12)

(230)柳月. Optimisation of Planning Parameters for Machining Blade Electrode Micro-Fillet with Scallop Height Modelling .MICROMACHINES .2021 ,12 (3)

(231)王鑫. A cost-effective serpentine micromixer utilizing ellipse curve .ANALYTICA CHIMICA ACTA Journal .2021 ,1155

(232)马海峰. Saturated adaptive barrier sliding mode control with state-dependent uncertainty limit .IET Control Theory & Applications .2021 (1)

(233)刘战强. Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surface quality, and tool wear: a sustainable machining. .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 (107)

(234)牛佳慧. A comprehensive method for selecting cutting tool materials .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,110 (1-2):229

(235)Su, Guosheng. On cutting temperatures in high and ultrahigh-speed machining .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,107 (1-2):73

(236)刘战强. 商用车挡泥板总成失效分析与试验规范制定 .《工程设计学报》 .2020 (27)

(237)刘国梁. The modification of corrosion resistance of 17-4PH stainless steel by cutting process .Journal of manufacturing processes .2020 ,49 :447

(238)赵文明. 整体叶盘铣削数控编程与加工技术 .航空制造技术 .2017 ,NULL (15):58

(239)王宏卫. Biomechanical analysis of combination Ti/PEEK fusion cage designed with topology optimization .International Journal of Applied Electromagnetics and Mechanics .2020 ,64 (1-4):1245

(240)马海峰. Disturbance estimator based switching function for DSMC systems with control saturation .Transactions of the Institute of Measurement and Control .2021 (1)

(241)马海峰. Design of Discrete-Time Sliding Mode Control with Disturbance Compensator based Switching Function .IEEE Transactions on Circuits and Systems II: Express Briefs .2020 (early access)

(242)赵文明. 基于hyperMILL的半开式整体叶轮五轴数控编程与加工技术 .《组合机床与自动化加工技术》 .2017 ,NULL (01):70

(243)Cai, Yukui. Product and Process Fingerprint for Nanosecond Pulsed Laser Ablated Superhydrophobic Surface .MICROMACHINES .2019 ,10 (3)

(244)庄鹏. 基于柔度耦合子结构法的主轴-卡盘与工件结合面参数辨识 .《机床与液压》 .2017 ,45 (07):38

(245)Su, Guosheng. Microstructure of spherical particles generated in high-speed machining of an alloy steel .International Journal of Materials Research .2017 ,108 (7):607

(246)陈龙. An experimental investigation on heat transfer performance of rotating anti-/deicing component .Applied thermal engineering .2020 (177)

(247)Keguo Zhang. Strain rate of material deformation in machining process from fluid flow perspective .Applied Sciences-Basel .2020 (10(9))

(248)张克国. Strain Rate of Metal Deformation in the Machining Process from a Fluid Flow Perspective .Applied Sciences-Basel .2020 ,10 (9)

(249)史振宇. Frequency-domain stability lobe prediction for high-speed face milling process under tool-workpiece dynamic interaction .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE .2017 ,231 (13):2336

(250)刘战强. On machinability and surface integrity in sequential machining of additively-manufactured thick coatings: A review. .Journal of manufacturing processes .2020 (Vol 53)

(251)刘战强. 深冷处理对TiAlN涂层刀具微观组织及力学性能的影响 .《工具技术》 .2020 ,54 (12)

(252)郝广超. The heat partition into cutting tool at tool-chip contact interface during cutting process: a review .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,108 (1-2):393

(253)Cai, Yukui. Effects of dimensional size and surface roughness on service performance for a micro Laval nozzle .Journal of Micromechanics and Microengineering .2017 ,27 (5)

(254)赵建. Analytical Prediction and Experimental Investigation of Burnishing Force in Rotary Ultrasonic Roller Burnishing Titanium Alloy Ti-6Al-4V .JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME .2020 ,142 (3)

(255)梁晓亮. Investigation of surface topography and its deterioration resulting from tool wear evolution when dry turning of titanium alloy Ti-6Al-4V .Tribology International .2019 ,135 :130

(256)Wang, Qingqing. Stress-induced orientation relationship variation for phase transformation of alpha-Ti to beta-Ti during high speed machining Ti-6Al-4V .MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING .2017 ,690 :32

(257)赵金富. Modelling for prediction of time-varying heat partition coefficient at coated tool-chip interface in continuous turning and interrupted milling .International Journal of Machine Tools and Manufacture .2019 ,147

(258)赵金富. PVD AlTiN coating effects on tool-chip heat partition coefficient and cutting temperature rise in orthogonal cutting Inconel 718 .INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER .2020 ,163

(259)Wang, Qingqing. Investigation the effect of strain history on crystallographic texture evolution based on the perspective of macro deformation for high speed machining Ti-6Al-4V .Materials Characterization .2017 ,131 :331

(260)陈栾霞. Process-surface morphology-tribological property relationships for H62 brass employing various manufacturing approaches .Tribology International .2020 ,148

(261)梁晓亮. Physic-chemical analysis for high-temperature tribology of WC-6Co against Ti-6Al-4V by pin-on-disc method .Tribology International .2020 ,146

(262)梁晓亮. Surface integrity analysis for high-pressure jet assisted machined Ti-6Al-4V considering cooling pressures and injection positions .Journal of manufacturing processes .2019 ,40 :149

(263)陈栾霞. Surface Characterization and Tribological Performance of Anodizing Micro-Textured Aluminum-Silicon Alloys .Material .2019 ,12 (11)

(264)Zhang, Peirong. Plastic deformation and critical condition for orthogonal machining two-layered materials with laser cladded Cr-Ni-based stainless steel onto AISI 1045 .Journal of Cleaner Production .2017 ,149 :1033

(265)梁晓亮. Dynamic recrystallization characterization in Ti-6Al-4V machined surface layer with process-microstructure-property correlations .Applied Surface Science .2020 ,530

(266)Teimouri, Reza. Analytical modeling of surface generation in ultrasonic ball burnishing including effects of indentation pile-up/sink-in and chipping fracture .ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING .2020 ,20 (4)

(267)Zhang, Jingjie. Prediction of cutting temperature distributions on rake face of coated cutting tools .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2017 ,91 (1-):49

(268)梁晓亮. Tool wear-induced microstructure evolution in localized deformation layer of machined Ti-6Al-4V .JOURNAL OF MATERIALS SCIENCE Journal .2020 ,55 (8):3636

(269)杨东. 钛合金TC4低塑性滚压表面完整性的实验研究 .华南理工大学学报（自然科学版） .2017 ,45 (01):137

(270)Liang, Xiaoliang. Experimental investigations on effects of tool flank wear on surface integrity during orthogonal dry cutting of Ti-6Al-4V .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2017 ,93 (5-):1617

(271)牛金涛. Anticorrosion property enhancement of Al–Li alloy 2A97 by lowering machined surface roughness .MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION .2021 (Volume71, Issue12)

(272)赵金富. Influences of coating thickness on cutting temperature for dry hard turning Inconel 718 with PVD TiAlN coated carbide tools in initial tool wear stage .Journal of manufacturing processes .2020 ,56 :1155

(273)梁晓亮. Multi-pattern failure modes and wear mechanisms of WC-Co tools in turning Ti-6Al-4V .Ceramics International .2020 (Volume 46, Issue 15)

(274)Zhang, Peirong. On machinability and surface integrity in subsequent machining of additively-manufactured thick coatings: A review .Journal of manufacturing processes .2020 ,53 :123

(275)Mohsan, Aziz Ui Hassan. A review on the progress towards improvement in surface integrity of Inconel 718 under high pressure and flood cooling conditions .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2017 ,91 (1-):107

(276)Zhang, Peirong. A study on corrosion behaviors of laser cladded Fe-Cr-Ni coating in as-cladded and machined conditions .MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION .2019 ,70 (4):711

(277)牛金涛. Comparative Study on Electrochemical Behavior of Al-Li Alloy 2A97 Machined Surfaces in Sodium Chloride Solution .IEEE Access .2020 ,7 :134198

(278)牛金涛. Effect of machining-induced surface integrity on the corrosion behavior of Al-Li alloy 2A97 in sodium chloride solution .MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION .2019 ,70 (2):259

(279)王桂杰. Effect of electrochemical polishing on surface quality of nickel-titanium shape memory alloy after milling .Journal of Materials Research and Technology .2020 ,9 (1):253

(280)刘战强. Investigation of size effect and idling on specific energy consumption and energy efficiency in high speed milling based on energy flow theory. .Energy .2020 (Volume 192)

(281)刘战强. 基于PLS的汽车外覆盖件冲压线运动规划及仿真 .计算机集成制造系统 .2020 (26)

(282)王兵. An Approach for Reducing Cutting Energy Consumption with Ultra-High Speed Machining of Super Alloy Inconel 718 .International Journal of Precision Engineering and Manufacturing-Green Technology .2020 ,7 (1):35

(283)梁晓亮. Tool wear induced modifications of plastic flow and deformed material depth in new generated surfaces during turning Ti-6Al-4V .Journal of Materials Research and Technology .2020 ,9 (5):10782

(284)王兵. 高速切削材料变形及断裂行为对切屑形成的影响机理研究 .金属加工(冷加工) .2018 (11)

(285)刘文韬. 钛合金Ti-6Al-4V高压冷却车削过程有限元分析 .现代制造工程 .2018 (10)

(286)刘战强. Correlation between the microstructure and machinability in machining Al–(5-25)wt.%Si alloys .SAGE Open .2020 (Vol 234, Issue 9)

(287)Wang, Bing. Acoustic emission signal analysis during chip formation process in high speed machining of 7050-T7451 aluminum alloy and Inconel 718 superalloy .Journal of manufacturing processes .2017 ,27 :114

(288)赵建. Plastic flow behavior for machined surface material Ti-6Al-4V with rotary ultrasonic burnishing .Journal of Materials Research and Technology .2020 ,9 (2):2387

(289)刘灿宇. TiN刀具涂层抗多次冲击性能研究 .现代制造工程 .2018 (07)

(290)Zhang, Peirong. Enhancing surface integrity and corrosion resistance of laser cladded Cr-Ni alloys by hard turning and low plasticity burnishing .Applied Surface Science .2017 ,409 :169

(291)郝广超. Thermal contact resistance enhancement with aluminum oxide layer generated on TiAlN-coated tool and its effect on cutting performance for H13 hardened steel .Surface＆ Coatings Technology .2020 ,385

(292)Teimouri, Reza. An analytical prediction model for residual stress distribution and plastic deformation depth in ultrasonic-assisted single ball burnishing process .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,111 (1-2):127

(293)赵金富. One-Dimensional Heat Conduction Inverse Modelling of Heat Flux Generated at Tool-Chip Interface in Cutting Inconel 718 .IEEE Access .2020 ,7 :95240

(294)王情情. Metallurgical-based prediction of stress-temperature induced rapid heating and cooling phase transformations for high speed machining Ti-6Al-4V alloy .Materials & Design .2017 ,119 :208

(295)王桂杰. Work hardening influencing on shape memory effect of NiTi alloy by varying milling speeds .SMART MATERIALS & STRUCTURES .2019 ,28 (10)

(296)Zhang, Peirong. Correlation between the microstructure and machinability in machining Al-(5-25) wt% Si alloys .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE .2020 ,234 (9):1173

(297)梁晓亮. Sustainability assessment of dry turning Ti-6Al-4V employing uncoated cemented carbide tools as clean manufacturing process .Journal of Cleaner Production .2019 ,214 :279

(298)王桂杰. Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2019 ,102 (5-8):2211

(299)梁晓亮. Multi-pattern failure modes and wear mechanisms of WC-Co tools in dry turning Ti-6Al-4V .Ceramics International .2020 ,46 (15):24512

(300)牛金涛. Characteristics of machined surface integrity in face milling Al-Li alloy 2A97 with carbide inserts .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2019 ,101 (1-4):839

(301)任小平. Microstructure refinement and work hardening in a machined surface layer induced by turning Inconel 718 super alloy .INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS .2018 ,25 (8):937

(302)殷庆安. Recent progress of machinability and surface integrity for mechanical machining Inconel 718: a review .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2020 ,109 (1-2):215

(303)Zhang, Jingjie. Transient and steady-state temperature distribution in monolayer-coated carbide cutting tool .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2017 ,91 (1-):59

(304)梁晓亮. State-of-the-art of surface integrity induced by tool wear effects in machining process of titanium and nickel alloys: A review .Measurement .2019 ,132 :150

(305)吕沃耘. Effects of overlap rate and energy density on mechanical properties of Inconel 718 by multiple small-spot-LSP impacts .Materials Research Express .2019 ,6 (6)

(306)郝广超. Influences of TiAlN Coating on Cutting Temperature during Orthogonal Machining H13 Hardened Steel .coatings .2019 ,9 (6)

(307)任小平. Microstructure refinement and work hardening in a machined surface layer induced by turning Inconel 718 super alloy .International Journal of Minerals, Metallurgy and Materials .2018 ,33 (8):937

(308)王鑫. Investigations into planar splitting and recombining micromixers with asymmetric structures .Journal of Micromechanics and Microengineering .2020 ,30 (1)

(309)牛金涛. Anticorrosion property enhancement of Al-Li alloy 2A97 by lowering machined surface roughness .MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION .2020 ,71 (12):1980

(310)赵金富. Measurement of temperature-dependent thermal conductivity for PVD Ti0.55Al0.45N ceramic coating by time domain thermo-reflectance method .Ceramics International .2019 ,45 (7):8123

(311)赵建. Ultrasonic-Induced Phase Redistribution and Acoustic Hardening for Rotary Ultrasonic Roller Burnished Ti-6Al-4V .METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE .2020 ,51 (3):1320

(312)郝广超. Experimental study on the formation of TCR and thermal behavior of hard machining using TiAlN coated tools .INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER .2019 ,140 :1

(313)李晓君. Tool Wear, Surface Topography, and Multi-Objective Optimization of Cutting Parameters during Machining AISI 304 Austenitic Stainless Steel Flange .METALS .2019 ,9 (9)

(314)刘战强. 基于响应曲面法的Nomex蜂窝高速铣削参数优化 .《工具技术》 .2020 ,54 (11)

(315)Zhang, P. R.. Machinability for dry turning of laser cladded parts with conventional vs. wiper insert .Journal of manufacturing processes .2017 ,28 :494

(316)刘阳. Analysis and implementation of chatter frequency dependent constrained layer damping tool holder for stability improvement in turning process .Journal of Materials Processing Technology .2019 ,266 :687

(317)Zhang, Peirong. On sustainable manufacturing of Cr-Ni alloy coatings by laser cladding and high-efficiency turning process chain and consequent corrosion resistance .Journal of Cleaner Production .2017 ,161 :676

(318)刘战强. A New Finite Element Approach Without Chip Formation to Predict Residual Stress Profile Patterns in Metal Cutting .Technical Publication. MSEC2009 .2009 ,0 (0):419

(319)刘战强. 高速切削过程中绝热剪切临界条件的研究 .《工具技术》 .2009 ,0 (11):8

(320)刘战强. 车削高温合金GH2132时切削力和表面粗糙度的建模与试验分析 .《工具技术》 .2009 ,43 (10):19

(321)刘战强. 高速车削铁基高温合金硬质合金刀具磨损机理 .《农业机械学报》 .2009 ,40 (11):240

(322)刘战强. A new FEM approach to predict residual stress profiles in hard turning without simulating chip formation .Transactions of NAMRC/SME .2010 ,38 (0):33

(323)刘战强. Experimental study on wear mechanism of cutting tool and cutting temperature in high speed machining superalloy .Advanced Materials research .2010 ,102-104 (0):525

(324)刘战强. Cutting forces and tool wear patterns in five-axis milling Fe-based superalloy with bull-nose end mill .Advanced Materials research .2010 ,97-101 (0):2049

(325)刘战强. 铣削粉末冶金高温合金的刀具优选试验 .《制造技术与机床》 .2010 ,0 (3):105

(326)刘战强. Machinability Investigation in High Speed Turning of Powder Metallurgy nickel-base Superalloy with Sialon Ceramic Inserts .Advanced Materials research .2010 ,139-141 (0):805

(327)刘战强. Machining Performance and Tool Wear of Coated Carbide Inserts in High Speed Turning Powder Metallurgy nickel-base Superalloy .IEEE CPS .2010 ,0 (0):71

(328)刘战强. 涂层刀具铣削粉末冶金镍基高温合金试验研究 .华南理工大学学报 .2010 ,38 (8):83

(329)刘战强. Experimental research in high efficiency milling of powder metallurgy superalloy .ICMTMA 2010 .2010 ,0 (0):178

(330)刘战强. 涂层硬质合金刀具铣削粉末冶金高温合金的切削性能研究 .四川大学学报(工程科学版) .2010 ,42 (3):206

(331)刘战强. Prediction the effect of vibration on machining distortion in HSM aerospace monolithic components .MSEC2010 .2010 ,0 (0):12

(332)刘战强. Study on Wear Properties and Mechanisms of Coated Carbide Tools in Dry Turning of 300M Steel .Advanced Materials research .2011 ,314-316 (0):1142

(333)刘战强. 涂层硬质合金刀具铣削粉末冶金镍基高温合金时的失效机理 .北京工业大学学报. .2011 ,37 (1):1

(334)刘战强. Selection of Tool Materials and Cutting Parameters Optimization for Turning Powder Metallurgy Nickel-based superalloy .Advanced Materials research .2011 ,154-155 (0):708

(335)刘战强. Research on Cutting Performance of High-speed Steel Drills during Drilling the Powder Metallurgy Nickel-based Superalloy .Key Engineering Materials .2011 ,464 (0):556

(336)刘战强. SURFACE INTEGRITY AND FATIGUE STRENGTH OF HARD MILLED SURFACES .MSEC2011 .2011 ,0 (0):199

(337)刘战强. 刀具寿命变异系数的研究 .《工具技术》 .1995

(338)刘战强. 高速车削数据库的研究与开发 .《机械工程师》 .2003 ,8 (8):10

(339)刘战强. 陶瓷刀具切削数据库管理系统的建立 .《机械工程师》 .2003

(340)刘战强. Thermodynamic entropy and its application in metal cutting system .2008 ,7130 (0)

(341)刘战强. 静态铣削力作用下的薄板大变形有限元分析 .中北大学学报 .2009 ,30 (1):21

(342)刘战强. 铣刀参数对薄壁零件铣削稳定性的影响 .华南理工大学学报 .2009 ,37 (2):29

(343)刘战强. Analytical and numerical solutions of transient heat conduction in monolayer coated tools .Materials Processing Technology .2009 ,209 (5):2369

(344)刘战强. Case modifying of high-speed cutting database based on CSP and similarity theory .Frontiers of Mechanical Engineering .2009 ,4 (1):83

(345)刘战强. 基于热力学的LT55陶瓷刀具加工45钢扩散与氧化磨损 .中国机械工程 .2009 ,20 (1):74

(346)刘战强. The influence of tool flank wear on residual stresses induced by milling aluminum alloy .Journal of Materials Processing Technology .2009 ,209 (9):4502

(347)刘战强. A new approach to cutting temperature prediction considering the diffusion layer in coated tools .Machine Tools and Manufacture .2009 ,49 (7-8):619

(348)刘战强. 涂层刀具切削温度研究现状 .《工具技术》 .2009 ,43 (1):3

(349)刘战强. 涂层刀具切削温度自测传感器 .中国机械工程 .2009 ,20 (4):397

(350)刘战强. 基于热力学的WC基硬质合金刀具加工各种常见工件材料的匹配研究 .《制造技术与机床》 .2009 ,0 (3):94

(351)刘战强. 基于对流换热原理的刀具热量和温度研究 .《武汉理工大学学报》 .2009 ,31 (6):130

(352)刘战强. 基于热力学的PCD刀具扩散与氧化磨损 .《武汉理工大学学报》 .2009 ,31 (6):126

(353)刘战强. PCBN刀具加工TC4钛合金的切削加工性 .山东大学学报（工学版） .2009 ,39 (1):77

(354)刘战强. 国内外高速高效加工领域研究现状分析比较 .机械工程导报 .2009 ,0 (5):16

(355)刘战强. 微切削中的切屑变形系数及切削变形研究 .《工具技术》 .2009 ,43 (4):11

(356)刘战强. 超额自由能的热力学计算 .《工具技术》 .2009 ,3 (8):46

(357)刘战强. Thermodynamics analysis of oxidation wear behavior of cemented carbide tools in high speed machining .Journal of Wuhan University of Technology .2009 ,24 (6):867

(358)刘战强. 难加工材料切削数据库系统的研究与开发 .《工具技术》 .2009 ,43 (10):39

(359)刘战强. 用解析法计算高速切削单涂层刀具瞬态温度分布 .机械工程学报 .2010 ,46 (1):187

(360)刘战强. 基于热力学的PCD刀具加工ZL109铝合金的扩散磨损 .天津大学学报 .2010 ,43 (4):162

(361)刘战强. 高速车削时刀屑摩擦区的熵产生 .《机械设计》 .2010 ,20 (2):90

(362)刘战强. 硬切削AISI440C不锈钢切削力建模及试验分析 .《工具技术》 .2010 ,44 (0):3

(363)刘战强. 粉末冶金切削加工性的研究进展 .《工具技术》 .2010 ,44 (3):3

(364)刘战强. 正交微切削中切削力预测模型研究 .《武汉理工大学学报》 .2010 ,34 (1):130

(365)刘战强. The actual geometry of the cutting tool involved in machining .Advanced Manufacturing Technology .2010 ,46 (1-4):91

(366)刘战强. Modeling of flow stress in orthogonal micro-cutting process based on strain gradient plasticity theory .Advanced Manufacturing Technology .2010 ,46 (1-4):143

(367)刘战强. Effect of Process Routing on Machining Deformation for Multi-Frame Double Sided Monolithic Components .Advanced Materials research .2010 ,97-101 (0):2894

(368)刘战强. Effects of tool geometry and workpiece hardness on surface roughness in finish hard turning of AISI 440C steel .Advanced Materials research .2010 ,97-101 (0):1815

(369)刘战强. Thermodynamical Matching of Alumina Based Composite Ceramic Tools with Typical workpiece materials .Advanced Manufacturing Technology .2010 ,49 (5):431

(370)刘战强. Finite Element Simulation of Machining of Ti-6Al-4V Alloy with Thermodynamical Constitutive Equation .Advanced Manufacturing Technology .2010 ,49 (5):567

(371)刘战强. Diffusion and oxidation wear of PCBN tool based on thermodynamics .AMR .2010 ,25 (2):265

(372)刘战强. Signal frequency and parameter estimation for power systems using the hierarchical identification principle .Mathematical and Computer Modelling .2010 ,52 (0):854

(373)刘战强. An experimental study on influences of material brittleness on chip morphology .Advanced Manufacturing Technology .2010 ,51 (1):87

(374)刘战强. Simulation and analysis of aerodynamics for high speed face milling cutters .SCIENCE CHINA Technological Sciences .2010 ,53 (9):2575

(375)刘战强. 材料切削加工性的综合评价方法 .《工具技术》 .2010 ,44 (7):3

(376)刘战强. 圆锯片噪声及其降噪技术的研究进展 .2010 ,44 (8):3

(377)刘战强. A novel sensor using tool coating and its substrate as thermocouple to measure cutting temperatures .MSEC2010 .2010 ,0 (0):317

(378)刘战强. Model of hard turning: effect of tool geometry on cutting force .36th International MATADOR Conference .2010 ,0 (0):227

(379)刘战强. YF45MnV易切削钢与45钢的切削加工性对比研究 .2010 ,44 (1):15

(380)刘战强. An Experimental and Numerical Analyses of Hard Turning AISI 440C Martensitic Steel .Frontiers of Design and Manufacturing .2010 ,1 (1):1

(381)刘战强. 切削用量优化模型的建立及应用 .《工具技术》 .2010 ,44 (5):39

(382)刘战强. 汽车行业铸铁材料切削数据库系统的功能与结构 .《工具技术》 .2010 ,44 (9):9

(383)刘战强. 高速切削加工稳定性研究综述 .《工具技术》 .2010 ,44 (9):3

(384)刘战强. 螺旋齿拉刀的有限元分析 .《工具技术》 .2010 ,44 (10):30

(385)刘战强. 螺旋齿圆孔拉倒与普通圆孔拉刀应力分析 .《工具技术》 .2010 ,44 (11):26

(386)刘战强. 基于剪切带断裂特征的锯齿形切屑形成机理演化的研究 .《工具技术》 .2010 ,44 (10):17

(387)刘战强. 锯齿形切屑变形表征与其形态演化研究 .《农业机械学报》 .2010 ,41 (1):223

(388)刘战强. 整体式螺旋微径刀具的应用研究进展 .《工具技术》 .2010 ,44 (10):3

(389)刘战强. 高速高效加工领域科学技术发展研究 .机械工程学报 .2010 ,46 (23):106

(390)刘战强. 涂层刀具扩散层的形成及其热传导分析 .机械工程学报 .2010 ,46 (21):194

(391)刘战强. AN ASSESSMENT, DEFINITION, AND DETERMINATION OF THE MINIMUM UNCUT CHIP THICKNESS OF MICROCUTTING AND IMPACT ON MACHINING NEW POWDER METALLURGY NICKEL-BASED SUPERALLOYS .IMECE2011 .2011 ,0 (0):11

(392)刘战强. Modeling and FEM Analysis for Interference between Tool Shank and Shrink Fit Toolholder .Advanced Materials research .2011 ,328-330 (1):446

(393)刘战强. 不同壁厚热缩刀柄夹持力的研究 .《工具技术》 .2011 ,45 (5):21

(394)刘战强. 高速铣削Inconel 718 已加工表面残余应力的有限元分析 .《工具技术》 .2011 ,45 (5):13

(395)刘战强. 基于应变梯度的微切削第一变形区几何分析模型的研究 .武汉理工大学学报(交通科学与工程版) .2011 ,35 (1):213

(396)刘战强. 夹杂物对FGH95粉末高温合金切削加工力学特性的研究 .《组合机床与自动化加工技术》 .2011 ,4 (1):1

(397)刘战强. The Analysis of Saw-tooth Chip Formation in High Speed Machining Through Material Micro-hardness Measurement .Advanced Materials research .2011 ,188 (0):9

(398)刘战强. Aeroacoustic performance evaluation of milling cutters based on the flow field on the cutter surface .Advanced Materials research .2011 ,188 (0):398

(399)刘战强. Influence of cutting speed on surface integrity for powder metallurgy nickel-based superalloy FGH95 .Advanced Manufacture Technology .2011 ,56 (1):553

(400)刘战强. Cutting force, Cutting Temperature and Tool Wear in End Milling of Powder Metallurgy Nickel-based Superalloy FGH95 .Advanced Materials research .2011 ,188 (0):55

(401)刘战强. 高温合金高速切削锯齿形切屑应变与应变率研究 .《农业机械学报》 .2011 ,42 (2):225

(402)刘战强. 高速面铣刀气动噪声计算与分析 .中国科学 技术科学 .2011 ,41 (1):63

(403)刘战强. 切削速度对Inconel 718加工表面完整性的影响 .《农业机械学报》 .2011 ,42 (1):223

(404)刘战强. 平头螺旋刃立铣刀切削力预报模型的建立与数值仿真（二）切削参数对铣削力的影响 .《工具技术》 .2011 ,45 (4):8

(405)刘战强. 平头螺旋刃立铣刀切削力预报模型的建立与数值仿真（一） 刀具几何参数对铣削力的影响 .《工具技术》 .2011 ,45 (3):17

(406)刘战强. 高速切削锯齿形切屑表征的研究现状综述 .《工具技术》 .2011 ,45 (5):3

(407)刘战强. 高速切削锯齿形切屑形成机理的研究现状与发展 .《工具技术》 .2011 ,45 (3):3

(408)刘战强. J-C本构参数对绝热剪切影响的敏感性分析 .《航空学报》 .2011 ,32 (11):2140

(409)刘战强. 高速面铣刀气动噪声及其频谱分析 .机械工程学报 .2011 ,47 (11):163

(410)刘战强. 面铣刀气动噪声数值模拟及不等齿距面铣刀的降噪方法 .科学通报 .2011 ,56 (1):1940

(411)刘战强. An experimental study of machinability of FGH95 in end milling with coated carbide tools .2011 ,7997 (0):1

(412)刘战强. Experiments and Simulation of Elastic-plastic Deformation in Thin Wall Part Milling .Advanced Materials research .2011 ,314-316 (1):482

(413)刘战强. 球头铣刀瞬态切削力建模与数值仿真 .《农业机械学报》 .2011 ,42 (8):200

(414)刘战强. Effect of cutting speed on surface integrity in high speed machining nickel-based superalloy Inconel 718 .Materials science forum .2012 ,697-698 (1):208

(415)刘战强. Study on Residual Stresses in Milling Aluminium Alloy 7050-T7451 .13th International Conference on Advanced Des .2008 ,0 (0):169

(416)刘战强. Relationships among SFLP, DFLP and robust layout .6th International Conference on e-Engineering .2008 ,10-12 (0):235

(417)刘战强. Modeling and simulating of single-row facility layout based on manufacturing costs .6th International Conference on e-Engineering .2008 ,10-12 (0):51

(418)刘战强. Modeling and Simulation of Three-dimensional Stability Lobes of Milling Thin-walled Plate .IEEE International Conference on Automation a .2008 ,0 (0):532

(419)刘战强. Determination of Minimum Uncut Chip Thickness in Micromachining .8th China-Japan International Conference on U .2009 ,69-70 (0):408

(420)刘战强. Heat Conduction Analysis of Coated Cutting Tools with Temperature-dependent Properties .2009 ,69-70 (0):389

(421)刘战强. Modeling the Minimum Chip Thickness in Orthogonal Micro-cutting Based on Plastic Strain Gradient .8th China-Japan International Conference on U .2009 ,69-70 (0):203

(422)刘战强. Effect of Helix Angle and Normal Rake Angle on Stability in End Milling .8th China-Japan International Conference on U .2009 ,69-70 (0):394

(423)刘战强. Modeling and simulation of big deformations of thin walled plate in end milling process .2007 :2384

(424)刘战强. The application of case-based reasoning in high-speed machining database .2002 :950

(425)刘战强. An intelligent cutting database for die and mold making operations .12th International Manufacturing Conference i .2006 ,532-533 :105

(426)刘战强. Development of case-based database for high-speed machining .ADVANCES IN GRINDING AND ABRASIVE PROCESSES .2012

(427)刘战强. Cutting tool materials for high speed machining .Progress in Natural Science-Materials International .2005 ,15 (9):777

(428)刘战强. Machinability for turning of 1Cr18Ni9Ti austenitic stainless steel with ceramic tool .ADVANCES IN MACHINING & MANUFACTURING TECHNOL .2006 ,315-316 :584

(429)刘战强. The impact of tool materials and cutting parameters on surface roughness in high-speed face-milling .ADVANCES IN GRINDING AND ABRASIVE PROCESSES .2004 ,462-465 :259

(430)刘战强. High-speed milling of cast iron with ceramic and PCBN tools .ADVANCES IN GRINDING AND ABRASIVE PROCESSES

(431)刘战强. Recent developments in tool materials for high speed machining .ADVANCES IN MATERIALS MANUFACTURING SCIENCE A .2004 ,471-472 :438

(432)刘战强. Intelligent error compensation in CNC machining through synergistic interactions among modeling, sensing and learning .ADVANCES IN MATERIALS MANUFACTURING SCIENCE A .2004 ,471-472 :178

(433)刘战强. Development of an intelligent system for tool materials selection in high speed machining .ADVANCES IN MATERIALS MANUFACTURING SCIENCE A .2004 ,471-472 :82

(434)刘战强. Development of high-speed cutting database system with hybrid intelligent reasoning .Key Engineering Materials .2006 ,315-316 :696

(435)刘战强. A comparison study of surface hardening by grinding versus machining .Key Engineering Materials .2005 ,304-305 :156

(436)刘战强. Surface roughness in high feed turning with wiper insert .Key Engineering Materials .2008 ,375-376 (0):406

(437)刘战强. Deformations of thin-walled plate due to static end milling force .Journal of Materials Processing Technology .2008 ,206 (1-3):345

(438)刘战强. Three-dimensional stability lobe and maximum material removal rate in end milling of thin-walled plate .Int.J.ofAdv.Manuf.Techn. .2009 ,0 (43):33

(439)刘战强. 航空铝合金薄壁件铣削变形预测研究 .《工具技术》 .2014

(440)刘战强. 基于加工特征的铣削力预测研究 .《现代制造工程》 .2014

(441)刘战强. Micro ball end milling of nickel-based alloy for Laval nozzle .Materials science forum .2014

(442)刘战强. Edge preparation on cutting force, cutting temperature and tool wear for hard turning .Materials science forum .2014

(443)刘战强. Milling force prediction for circular contour machining .Materials science forum .2014

(444)刘战强. Research on transient temperature of cutting tool during high speed slot milling of AISI H13 .Materials science forum .2014

(445)刘战强. Investigations on the machinability of titanium alloy TC25 .Materials science forum .2014

(446)刘战强. Machining feature classification and description for intelligent tool selection .Key Engineering Materials .2014

(447)刘战强. 镍基合金Inconel 718薄壁件铣削加工数控程序和切削参数优化 .《机床与液压》 .2016

(448)刘战强. 基于UG二次开发技术的PDM/CAM集成方法研究 .《机床与液压》 .2016

(449)刘战强. 高速切削Ti-6Al-4V绝热剪切带应变、应变率有限元模拟研究 .《现代制造工程》 .2016

(450)刘战强. Heat Conduction in Coated Tools during Cutting based on Finite Element Simulation .Key Engineering Materials .2016

(451)刘战强. Characterization of thrust performance of micro-nozzle machined by micro-end milling .2016

(452)刘战强. Optimization of cutting parameters and burrs control with PMMA coating in micro-milling titanium alloys .Materials science forum .2016

(453)刘战强. Numerical Analysis of Aeroacoustic Noise for High-Speed Face Milling Cutters in Three Dimensional Unsteady Flow Fields .ASME Journal of Manufacturing Science and Engineering .2012

(454)刘战强. Development of a thermocouple sensor using tool coating and its substrate to measure metal turning temperatures .International Journal of Materials and Product Technology .2013

(455)刘战强. Experimental study on cutting force and surface roughness for 7050-T7451 aluminum alloy of high speed milling .Applied Mechanics & Materials .2013

(456)刘战强. 高效切削与高完整性加工技术 .航空制造技术 .2016

(457)刘战强. 加强刀具技术研究，提高制造业竞争力 .航空制造技术 .2016

(458)刘战强. 旋转超声滚压加工中的滚压力与滚压深度及表面形貌研究 .《兵工学报》 .2016

(459)刘战强. 约束阻尼型镗杆的优化及减振性能研究 .《航空学报》 .2016

(460)刘战强. 沟槽与方柱阵列结构的微铣削和加工表面疏水性 .机械工程学报 .2016

(461)刘战强. 材料动态性能对高速切削切屑形成的影响规律 .中国科学-E：技术科学 .2016

(462)刘战强. Investigations on deformation and fracture behavior of workpiece material during high speed machining of 7050-T7451 aluminum alloy .CIRP Journal of Manufacturing Science and Technology .2016

(463)刘战强. Experimental investigation of cutting tool temperature during slot milling of AerMet 100 steel .Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture .2016

(464)刘战强. Evolutions of grain size and micro-hardness during chip formation and machined surface generation for Ti-6Al-4V in high speed machining .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2016

(465)刘战强. Machinability investigations on turning of Cr-Ni-based stainless steel cladding formed by laser cladding process .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2016

(466)刘战强. Method of strain-rate difference calculation in high-speed metal cutting .Measurement .2016

(467)刘战强. Modeling and prediction for 3D surface topography in finish turning with conventional and wiper inserts .Measurement .2016

(468)刘战强. Influence of machined surface roughness on thrust performance of micro-nozzle manufactured by micro-milling .Experimental Thermal and Fluid Science .2016

(469)刘战强. Cutting performance of solid ceramic end milling tools in machining hardened AISI H13 steel .International Journal of Refractory Metals and Hard Materials .2016

(470)刘战强. Development of constrained layer damping toolholder to improve chatter stability in end milling .International Journal of Mechanical Sciences .2016

(471)刘战强. Plastic deformation induced nano-scale twins in Ti-6Al-4V machined surface with high speed machining .Materials Science and Engineering: A .2016

(472)刘战强. Quantification of Microstructural Features and Prediction of Mechanical Properties of a Dual-Phase Ti-6Al-4V Alloy .Materials .2016

(473)刘战强. Investigations of ultrasonic frequency effects on surface deformation in rotary ultrasonic roller burnishing Ti-6Al-4V .Materials and design .2016

(474)刘战强. Physical-mechanical and electrochemical corrosion behaviors of additively manufactured Cr-Ni-based stainless steel formed by Laser cladding .Materials and design .2016

(475)刘战强. Evaluation on fracture locus of serrated chip generation with stress triaxiality in high speed machining of Ti6Al4V .Materials and design .2016

(476)刘战强. Proper selection of cutting parameters and cutting tool angle to lower the specific cutting energy during high speed machining .Journal of Cleaner Production .2016

(477)刘战强. 基于CFD的微型拉伐尔喷嘴选型与扩张段长度仿真优化研究 .《四川大学学报（工程科学版）》 .2014

(478)刘战强. 镍基粉末高温合金切削加工表面白层形成热-力耦合作用机理 .机械工程学报 .2014

(479)刘战强. 约束阻尼型减振镗杆 .《航空学报》 .2014

(480)刘战强. Deformation-phase transformation coupling mechanism of white layer formation in high speed machining of FGH95 Ni-based superalloy .Applied Surface Science .2014

(481)刘战强. Serrated chip formation mechanism based on mixed mode of ductile fracture and adiabatic shear .Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture .2014

(482)刘战强. Effect of cutter geometric configuration on aerodynamic noise generation in face milling cutters .Applied Acoustics .2014

(483)刘战强. Analytical modeling of adiabatic shear band spacing for serrated chip in high-speed machining .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2014

(484)刘战强. Investigations on the chip formation mechanism and shear localization sensitivity of high-speed machining Ti6Al4V .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2014

(485)刘战强. Surface morphology and microcrack formation for 7050-T7451 aluminum alloy in high speed milling .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2015 ,78 (1):281

(486)刘战强. Machinability of hastelloy C-276 using Hot-pressed sintered Ti(C7N3)-based cermet cutting tools .Chinese Journal of Mechanical Engineering (English Edition) .2015 ,28 (3):599

(487)刘战强. Energy consumption characteristics in finish hard milling of tool steels .Procedia Manufacturing .2015 ,1 :477

(488)刘战强. 基于最小吉布斯自由能的疏水表面接触角研究 .山东大学学报(工学版) .2015 ,45 (2):56

(489)刘战强. 微喷砂后处理工艺对涂层刀具性能的影响规律 .《现代制造工程》 .2015 (7):85

(490)刘战强. 基于UG二次开发技术的CAD/CAE/CAM软件集成方法研究 .《机床与液压》 .2015 ,43 (9):141

(491)刘战强. 铣削力预测方法和影响因素综述 .《机械科学与技术》 .2015 (8):1190

(492)刘战强. 机械加工强化机理与工艺技术研究进展 .中国机械工程 .2015 ,26 (3):403

(493)刘战强. 切削加工表面变质层厚度的图像识别技术研究 .天津大学学报：自然科学与工程技术版 .2015 (6):547

(494)刘战强. Analysis and optimization of surface roughness in rotary ultrasonic burnishing of titanium alloy Ti-6Al-4V .Advanced Materials research .2015 ,806 :406

(495)刘战强. Modeling and prediction of tool-chip interface temperature in hard machining of H13 steel with PVD coated tools .International Journal of Machining and Machinability of Materials .2015 ,17 (5):381

(496)刘战强. Plastic flow modeling of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy at elevated temperatures and high strain rates .Journal of Wuhan University of Technology-Mater. Sci. Ed. .2015 ,30 (3):611

(497)刘战强. Fluid-like properties of chip flow in high-speed metal cutting process .Machining Science and Technology .2015 ,19 (1):71

(498)刘战强. Brittle removal mechanism of ductile materials with ultra high speed machining .ASME Journal of Manufacturing Science and Engineering .2015 ,137 (6):061002-1

(499)刘战强. Residual surface topology modeling and simulation analysis for micro-machined nozzle .International Journal of Precision Engineering and Manufacturing .2015 ,16 (1):157

(500)刘战强. Shear localization sensitivity analysis for Johnson-Cook constitutive parameters on serrated chips in high speed machining of Ti6Al4V .Simulation Modelling Practice and Theory .2015 ,55 :63

(501)刘战强. Optimization of machining parameters for micro-machining nozzle based on characteristics of surface roughness .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2015 ,80 (5):1403

(502)刘战强. Theorical modeling and experimental validation of specific cutting force for micro end milling .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2015 ,77 (5):1433

(503)刘战强. Surface topography analysis and cutting parameters optimization for peripheral milling titanium alloy Ti–6Al–4V .International Journal of Refractory Metals and Hard Materials .2015 ,51 :192

(504)刘战强. Fluid mechanics of internal flow with friction and cutting strategies for micronozzles .International Journal of Mechanical Sciences .2015 ,100 :41

(505)刘战强. Investigations of critical cutting speed and ductile-to-brittle transition mechanism for workpiece material in ultra high speed machining .International Journal of Mechanical Sciences .2015 ,104 :44

(506)刘战强. Effect of sequential turning and burnishing on the surface integrity of Cr-Ni-based stainless steel formed by laser cladding process .Surface and Coatings Technology .2015 ,276 :327

(507)刘战强. Surface plastic deformation and surface topography prediction in peripheral milling with variable pitch end mill .International Journal of Machine Tools and Manufacture .2015 ,91 (43):53

(508)刘战强. Influences of chip serration on micro-topography of machined surface in high-speed cutting .International Journal of Machine Tools and Manufacture .2015 ,89 :202

(509)刘战强. Machining deformation prediction for frame components considering multifactor coupling effects .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2013 ,68 (1-4):187

(510)刘战强. A numeric investigation of friction behaviors along tool/chip interface in nanometric machining of a single crystal copper structure .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2013 ,68 (1-4):365

(511)刘战强. Elastic-plastic Deformation of Milling Thin Wall Part .2013 ,345 :321

(512)刘战强. 纳米切削过程中刀-屑接触区应力分布研究 .机械工程学报 .2013 ,49 (19):147

(513)刘战强. Influence of Three-dimensional Stability Lobes on the Cutter Design .Applied mechanics and materials .2013 ,345 :521

(514)刘战强. 合金元素对铸造铝合金切削加工性的影响 .《工具技术》 .2013 ,47 (8):3

(515)刘战强. 基于切削加工特征的车削刀具的选择 .《工具技术》 .2013 ,47 (2):33

(516)刘战强. FEM Analyzing Effect of Tool Body Materials on Security Reliability for Face-Milling Cutter .Advanced Materials research .2013 ,797 :161

(517)刘战强. Influence of size effect on burr formation in micro cutting .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2013 ,68 (9-12):1911

(518)刘战强. 基于CFD的高速切削层流模拟 .《航空学报》 .2013 ,34 (3):703

(519)刘战强. Wear mechanism of PVD TiAlN coated cemented carbide tool in dry turning titanium alloy TC4 .Advanced Materials research .2013 ,652-654 :2200

(520)刘战强. Effect of cutting conditions on the machinability of stainless steel formed by laser cladding .Advanced Materials research .2013 ,797 :166

(521)刘战强. Analytical and experimental study on formation of concentrated shear band of saw tooth chip in high-speed machining .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2013 ,65 (9-12):1735

(522)刘战强. Size effect on surface roughness in micro turning .International Journal of Precision Engineering and Manufacturing .2013 ,14 (3):345

(523)刘战强. Dynamic behaviour of Ti-17 alloy under high strain rates at elevated temperatures .Materials at High Temperatures .2013 ,30 (2):145

(524)刘战强. Comparison of tool–chip stress distributions in nano-machining of monocrystalline silicon and copper .International Journal of Mechanical Sciences .2013 ,77 :30

(525)刘战强. Damage of the machined surface and subsurface in orthogonal milling of FGH95 superalloy .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2013 ,68 (5-8):1573

(526)刘战强. 圆弧铣刀瞬态切削力建模与数值仿真 .《应用基础与工程科学学报》 .2012 ,20 (6):1022

(527)刘战强. 切削用量对立铣加工钛合金Ti6Al4V 切削力和切削温度影响规律的有限元仿真研究 .《工具技术》 .2012

(528)刘战强. Influence of Cutting Parameters on Surface Characteristics for Milling Powder Metallurgy Nickel-Based Superalloy .Advanced Materials research .2012 ,399 (401):1635

(529)刘战强. 双通道热电偶测温系统及其在切削温度测试中的应用 .《工具技术》 .2012 ,46 (10):83

(530)刘战强. 面向加工特征的刀具和切削参数计算机辅助选择系统 .《工具技术》 .2012 ,3 (3):16

(531)刘战强. 铣削加工系统动态特性参数识别研究进展 .《工具技术》 .201 ,6 :3

(532)刘战强. 高速切削过程中的材料流体特性研究 .《工具技术》 .2012 ,8 :7

(533)刘战强. 基于有限元法的微径铣刀变形分析 .《组合机床与自动化加工技术》 .2012 ,5 :1

(534)刘战强. 平面铣削刀具前刀面瞬态切削温度的研究 .《现代制造工程》 .2012 ,1 :8

(535)刘战强. 高速切削中切削速度对工件材料力学性能和切屑形态的影响机理 .中国科学: 技术科学 .2012 ,42 (11):1305

(536)刘战强. 镍基粉末高温合金切削加工表面白层研究 .《稀有金属材料与工程》 .201 ,41 (1):698

(537)刘战强. 镍基高温合金高速铣削加工表面完整性 .中南大学学报(自然科学版) .2012 ,43 (7):2593

(538)刘战强. Three-dimensional stability lobes of milling thin-walled plate with different cutter geometry parameters .2012 :975

(539)刘战强. Analyses of Size Effect on Surface Roughness in Micro Turning Process .Materials science forum .2012 ,723 :389

(540)刘战强. Method of Precise Tool Setting for Micro Turning .Materials science forum .2012 ,723 :383

(541)刘战强. Time Molding in Rough Milling of Circular Cavity .Materials science forum .2012 (723):87

(542)刘战强. Sustainable High Speed Dry Cutting of Magnesium Alloys .Materials science forum .2012 ,723 :3

(543)刘战强. Experimental Investigations of Size Effect on Cutting Force, Specific Cutting Energy, and Surface Integrity during Micro Cutting .Materials science forum .2012 ,723 (371):376

(544)刘战强. Chip Formation Characteristics in High-Speed Machining of Hardened AISI1045 Steel .Advanced Materials research .2012 ,565 :484

(545)刘战强. Fluid Characteristics of Material Flow in High Speed Metal Cutting Process .Advanced Materials research .2012 (500):544

(546)刘战强. Influence of Cutting Speed on Plastic Deformation in Machined Surface of FGH95 PM Superalloy .Applied mechanics and materials .2012 (148-149):163

(547)刘战强. Experimental Analysis on Spherical Chips in High-Speed Machining of Hardened AerMet100 .Materials science forum .2012 ,723 :67

(548)刘战强. Influence of Tool Flank Wear on Surface Integrity in Orthogonal Milling of Powder Metallurgy Superalloy .Materials science forum .2012 ,723 :182

(549)刘战强. Analytical Modeling to Predict Adiabatic Shear Critical Condition for Orthogonal Cutting .Materials science forum .2012

(550)刘战强. Numerical Analysis of Face Milling Ti6Al4V with Different Tool Materials .Materials science forum .2012

(551)刘战强. Investigations of Transient Machined Workpiece Surface Temperature in High Speed Peripheral Milling Using Inverse Method .Materials science forum .2012 ,723 :14

(552)刘战强. Characterization of chip formation during machining 1045 steel .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2012 ,63 :881

(553)刘战强. Effect of cutting speed on surface integrity and chip morphology in high-speed machining of PM nickel-based superalloy FGH95 .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2012

(554)刘战强. Wear characteristics of nano TiAlN-coated carbide tools in ultra-high speed machining of AerMet100 .wear .2012 ,289 :124

(555)刘战强. Characteristics of chip evolution with elevating cutting speed from low to very high .International Journal of Machine Tools and Manufacture .2012 (54-55):82

(556)刘战强. Numerical Analysis of Aeroacoustic Noisef or High-Speed Face Milling Cutters in Three Dimensional Unsteady Flow Fields .ASME Journal of Manufacturing Science and Engineering .2012 ,134 (4):041002

(557)刘战强. 高效切削铁基高温合金刀具磨损特性研究 .制造业自动化 .2011 ,33 (10):48

(558)刘战强. 铣削粉末冶金高温合金FGH95时工件温度的研究 .《工具技术》 .2011 ,45 (10):3

(559)刘战强. 基于雷达图法的材料切削加工性评价 .《机床与液压》 .2011 ,39 (15):1

(560)刘战强. 基于应变梯度塑性理论的微切削第一变形区应变分布研究 .中国机械工程 .2011 ,22 (15):1797

(561)刘战强. 基于B/S模式的零件加工特征文件传递与存储技术研究 .《现代制造工程》 .2011 ,0 (17):14

(562)刘战强. 切削Ti-6Al-4V硬质合金涂层平头立铣刀的几何参数优化仿真研究 .《工具技术》 .2011 ,45 (10):7

(563)刘战强. Thermodynamical matching of alumina-based composite ceramic tools with typical workpiece materials .The International Journal of Advanced Manufac .2010 ,49 (49):567

(564)刘战强. Numerical modeling of minimum uncut chip thickness for micromachining with different rake angle .ASME .2011 ,0 (2):403

(565)蔡玉奎. Optimum end milling tool path and machining parameters for micro Laval nozzle manufacturing .Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture .2017 (10)

(566)蔡玉奎. Product and process fingerprint for nanosecond pulsed laser ablated superhydrophobic surface .MICROMACHINES .2019 (10)

(567)蔡玉奎. Effects of dimensional size and surface roughness on service performance for a micro Laval nozzle .JOURNAL OF MICROMECHANICS AND MICROENGINEERING .2017 (27)

(568)蔡玉奎. Influence of machined surface roughness on thrust performance of micro-nozzle manufactured by micro-milling .Experimental Thermal and Fluid Science .2016 (77)

(569)马海峰. Design of Discrete-Time Sliding Mode Control With Disturbance Compensator-Based Switching Function .IEEE Transactions on Circuits and Systems II: Express Briefs .2021 ,68 (4):1268

(570)马海峰. Sliding Mode Control for Uncertain Discrete-Time Systems Using an Adaptive Reaching Law .IEEE Transactions on Circuits and Systems II: Express Briefs .2021 ,68 (2):722

(571)陈龙. Mathematical modeling of heat transfer in GO-doped reinforce polymer for anti-/deicing of wind turbines .International Communications in Heat and Mass Transfer .2021 ,123 (1)

(572)宋清华. Precise chatter monitoring of thin-walled milling based on parametric time-frequency transform method .Journal of Materials Processing Technology .2020 (111)

(573)宋清华. Influence of biocompatible hydrophilic needle surface coating on puncture biopsy process for biomedical applications .Coatings .2020 ,10 (1)

(574)马海峰. Sliding Mode Control for Uncertain Discrete-Time Systems using An Adaptive Reaching Law .IEEE Transactions on Circuits and Systems II: Express Briefs .2020 (10)

(575)张蕊. Corrosion resistance and biological activity of TiO2 implant coatings produced in oxygen-rich environments .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE .2017 ,231 (1):20

(576)靳一帆. Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties .Journal of Materials Processing Technology .2017 ,240 :233

(577)王桂森. Fabrication of an orderly micro/nanostructure on titanium surface and its effect on cell proliferation .Mater Lett .2018 ,212 :247

(578)王桂森. Surface Functionalization of Micro/Nanostructured Titanium with Bioactive Ions to Regulate the Behaviors of Murine Osteoblasts .Advanced Engineering Materials .2017 ,19 (11)

(579)王桂森. Construction of Complex Structures Containing Micro-Pits and Nano-Pits on the Surface of Titanium for Cytocompatibility Improvement .MATERIALS .2019 ,12 (17)

(580)史振宇. Swept Mechanism of Micro-Milling Tool Geometry Effect on Machined Oxygen Free High Conductivity Copper (OFHC) Surface Roughness .Materials .2017 ,10 (2)

(581) Optimization design and simulationanalysis of composite material anti-/deicing component for wind turbine blade .26TH IAHR SYMPOSIUM ON HYDRAULIC MACHINERY AND SYSTEMS, PTS 1-7 .2019 ,227

(582)王兵. A Modified Johnson-Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy .JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME .2019 ,141 (1)

(583)杜宜聪. Size-dependent responses of micro-end mill based on strain gradient elasticity theory .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2019 ,100 (5-8):1839

(584)刘国梁. The modified surface properties and fatigue life of Incoloy A286 face-milled at different cutting parameters .MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING .2017 ,704 :1

(585)刘国梁. The modification of corrosion resistance of 17-4PH stainless steel by cutting process .Journal of manufacturing processes .2020 ,49 (447)

(586)黄传真. Study on surface integrity of compacted graphite iron milled by cemented carbide tools and ceramic tools .International J of Advanced Manufacturing Technology .2019 ,103 :4123

(587)宋清华. Machining characteristics based life cycle assessment in eco-benign turning of pure titanium alloy .Journal of Cleaner Production .2020 (11)

(588)陈龙. Numerical Simulation on Effect of Graphene Doped Morphology on Heat Transfer Efficiency of Anti-/deicing Component .2019 International Conference on Mechanical Design .2019

(589)宋清华. Vibration suppression of thin-walled workpiece milling using a time-space varying PD control method via piezoelectric actuator .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2019

(590)宋清华. Hydrodynamic lubrication analysis of two-dimensional section between piston skirt and textured cylinder wall considering slip boundary conditions .Tribology International .2019

(591)陈龙. Optimization design and simulationanalysis of composite material anti- .3rd International Conference on Energy Engineering and Environmental Protection .2018

(592)宋清华. A generalized cutting force model for five-axis milling processes .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE .2019 ,233 (1):3

(593)刘逢时. 先进切削加工技术综述 .《工具技术》 .2003 ,37 (357):3

(594)黄传真. Study on advanced cutting tools fabricated from coated powders and their cutting performance .ADVANCES IN GRINDING AND ABRASIVE PROCESSES .2004 ,19-25 :259

(595)宋清华. Influence of rotational damping on stability in end milling processes .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2018

(596)石佳昊. On the segmentation-driven vibration in milling titanium alloy .Journal of Engineering Manufacture .2018

(597)宋清华. A generalized cutting force model for five-axis milling processes .Journal of Engineering Manufacture .2018

(598)杜宜聪. Size-dependent responses of micro-end mill based on strain gradient elasticity theory .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2018

(599)高建. Chatter detection and stability regions acquisition in thin-walled workpiece milling based on CMWT .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2018

(600)王桂森. Bioactivity of micropatterned TiO2 nanotubes fabricated by micro-milling and anodic oxidation .MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS .2019 ,95 :114

(601)宋清华. Parametric study of dynamic response of sandwich plate under moving loads .Thin-Walled structures .2018

(602)贾俊楠. Effect of wall roughness on performance of microchannel applied in microfluidic device .Microsystem Technologies .2018

(603)Sunny. A simulation model for predicting surface integrity coupled thermal-mechanical effect in turning of Inconel 718 super alloy .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2019 ,100 (5-8):1825

(604)王冬琦. Cutting characteristics of porcine tenderloin tissue along tangenrial direction of surface .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2018

(605)巫永琳. Stability of turning process with a distributed cutting force model .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2018

(606)邹斌. Machinability of Hastelloy C-276 Using Hot-pressed Sintered Ti(C7N3)-based Cermet Cutting Tools .Chinese Journal of Mechanical Engineering (English Edition) .2015 ,28 (3):599

(607)宋清华. Dynamic response and parametric analysis of geometrically nonlinear functionally graded plate with arbitrary constraints under moving mass .IEEE Access .2018

(608)Wan Yi. Research on Cutting Cast Super Alloy K24 with Milling and Abrasive Water Jet Methods .2012 ,697-698 :157

(609)Yukui Cai. Optimum end milling tool path and machining parameters for micro Laval nozzle manufacturing .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE .2017 ,231 (10):1703

(610)石佳昊. Formulating a numerically low-cost method of a constrained layer damper for vibration suppression in thin-walled component milling and experimental validation .International Journal of Mechanical Sciences .2017 ,128 :294

(611)宋清华. A time-space discretization method in milling stability prediction of thin-walled component .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2017 ,89 (9-):2675

(612)石佳昊. Partial Surface Damper to Suppress Vibration for Thin Walled Plate Milling .Chinese Journal of Mechanical Engineering (English Edition) .2017 ,30 (3):632

(613)宋清华. Vibration analysis of functionally graded plate with a moving mass .Applied Mathematical Modelling .2017 ,46 :141

(614)石佳昊. Dynamic deformation of thin-walled plate with variable thickness under moving milling force .16th CIRP Conference on Modelling of Machining Operations (16th CIRP CMMO) .2017 ,58 :311

(615)Wan Yi. Burr Controlling in Micro Milling with Supporting Material Method. .2015 ,2015 (1):501

(616)Zhanqiang Liu. Burr controlling in micro milling with supporting material method .2015 ,1 :501

(617)石佳昊. A novel stability prediction approach for thin-walled component milling considering material removing process .中国航空学报（英文版） .2017 ,30 (05):1789

(618)石佳昊. A novel stability prediction approach for thin-walled component milling considering material removing process .CHINESE JOURNAL OF AERONAUTICS .2017 ,30 (5):1789

(619)李明爽. Mechanical properties and microstructure of Al2O3-TiB2-TiSi2 ceramic tool material .Ceramics International .2017 ,43 (16):14192

(620)Wan Yi. Cutting Forces and Tool Wear Patterns in Five-axis Milling Fe-based Super Alloy with Bull-nose End Mill .2010 ,97-101 (3):2049

(621)Wan Yi. Identification of Stability Lobes in High-Speed Milling Flexible Parts with Bull-Nose End Mills .2010 ,443 :297

(622)Wan Yi. Research on Thermodynamic Characteristics in High-Speed Machining System .2011 ,188 :21

(623)Wan Yi. Effect of milling speed and feed on surface residual stress of 7050-T7451 aluminum alloy .2012 ,499 :217

(624)Zhanqiang Liu. Task Scheduling and Routing Optimization for AGVs Based on Intelligent Multi-Agent technologies in Tobacco AS/RS .2007 :2840

(625)宋清华. Comprehensive cutting force model for milling processes with solid end mills and inserted cutters .Key Engineering Materials .2014 (589-590):82

(626)Wan Yi. Turbine blade distortion analysis during spiral NC milling based on FEM .2012 ,723 :143

(627)宋清华. Subdivision of chatter-free regions and optimal cutting parameters based on vibration frequencies for peripheral milling process .International Journal of Mechanical Sciences .2014 ,83 :172

(628)Wan Yi. Influence of milling parameters on surface residual stresses of 7050-T7451 aluminum alloy .2012 ,723 :208

(629)宋清华. Boring bar with constrained layer damper for improving process stability .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2016 ,83 (9):1951

(630)Zhanqiang Liu. 基于MATLAB Web Server和ASP.NET技术远程切削参数优化方法 .《机械设计与制造》 .2011 ,0 (12):85

(631)Wan Yi. Damage Analysis of Cemented Carbide Tool in High Speed Milling Induced by Thermal Stress with Laser Shock .2009 ,69-70 (0):399

(632)Sunny. Time Molding in Rough Milling of Circula .Materials science forum .2012 ,723 :87

(633)Sunny. 混合推理在难加工材料切削数据库系统的应用 .《工具技术》 .2011 ,45 (458):35

(634)周军. Intelligent matching of cutting tools with workpiece materials .Key Engineering Materials .2006 ,315-316 :411

(635)Sunny. A computer-based intelligent system for automatic tool selection .Materials science forum .2012 ,723 :238

(636)Zhanqiang Liu. Hybrid modeling with finite element analysis and statistical method for residual stress prediction in peripheral milling of titanium alloy Ti-6Al-4V .International Journal of Mechanical Sciences .2016

(637)黄传真. Tool damage and its effect on the machined-surface roughness in high-speed face-milling the 17-4PH stainless steel .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2016 ,83 :257

(638)黄传真. Surface integrity and fatigue performance of 17-4PH stainless steel after cutting operations .Surface and Coatings Technology .2016 ,307 :182

(639)宋清华. Instability of internal damping due to collet chuck holder for rotating spindle-holder-tool system .Mechanism and Machine Theory .2016 ,101 :95

(640)宋清华. A solid-analytical-based method for extracting cutter-workpiece engagement in sculptured surface milling .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2015 ,80 :1297

(641)宋清华. Application of Sherman-Morrison-Woodbury formulas in instantaneous dynamic of peripheral milling for thin-walled component .International Journal of Mechanical Sciences .2015 ,96-97 :79

(642)宋清华. Dynamic analysis of rectangular thin plates of arbitrary boundary conditions under moving loads .International Journal of Mechanical Sciences .2016 ,117 :16

(643)宋清华. The influence of chatter on machining distortion for thin-walled component peripheral milling .Advances in Mechanical Engineering .2014

(644)宋清华. Prediction of cutter-workpiece engagement for five-axis ball-end milling .Materials science forum .2014 ,800-801 :254

(645)宋清华. Chatter stability for micromilling processes with flat end mill .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2014 (71):1159

(646)Wan Yi. 先进切削刀具及未来趋势 .航空制造技术 .2014 ,2014 (12):40

(647)史振宇. Actually Geometry of Milling Tool Involved in Cutting Process .2012 ,723 :394

(648)刘逢时. 先进切削加工技术综述 .《工具技术》 .2003 ,37 (357):3

(649)宋清华. Predicting the effect of vibration on machining distortion in end milling aerospace monolithic components .2010 ,2 (0):51

(650)黄传真. Study on advanced cutting tools fabricated from coated powders and their cutting performance .ADVANCES IN GRINDING AND ABRASIVE PROCESSES .2004 ,19-25 :259

(651)Zhanqiang Liu. 小字号汉字的数控加工技术 .《机械制造》 .2008 ,46 (522):34

(652)Wan Yi. Tool wear patterns and mechanisms of solid cemented carbide in high-speed milling of aluminum alloy .Transactions of Nanjing University of Aeronautics and Astronautics .2007 ,v24 (2):125

(653)Wan Yi. 高速铣削航空铝合金7050－T7451时刀具的磨损破损 .机械工程学报 .2007 ,43 (4):103

(654)宋清华. Novel method for dynamic optimization of stability in high-speed milling system .Transactions of Nanjing University of Aeronau .2009 ,26 (3):184

(655)Zhanqiang Liu. 机床可用度与缓冲区容量的关系模型研究 .《工具技术》 .2006 (9):24

(656)Sunny. Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718 .INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY .2016

(657)邹斌. Machinability of Hastelloy C-276 Using Hot-pressed Sintered Ti(C7N3)-based Cermet Cutting Tools .chinese journal of mechanical engineering .2015 ,28 (3):599

(658)Wan Yi. Burr Controlling in Micro Milling with Supporting Material Method. .Procedia Manufacturing .2015 ,2015 (1):501

(659)Wan Yi. Cutting Forces and Tool Wear Patterns in Five-axis Milling Fe-based Super Alloy with Bull-nose End Mill .Advanced Materials research .2010 , 97-101 (3):2049

(660)Wan Yi. Identification of Stability Lobes in High-Speed Milling Flexible Parts with Bull-Nose End Mills .Key Engineering Materials .2010 ,443 :297

(661)Wan Yi. Research on Thermodynamic Characteristics in High-Speed Machining System .Advanced Materials research .2011 ,188 :21

(662)Wan Yi. Effect of milling speed and feed on surface residual stress of 7050-T7451 aluminum alloy .Key Engineering Materials .2012 ,499 :217

(663)宋清华. Comprehensive cutting force model for milling processes with solid end mills and inserted cutters .Key Engineering Materials .2014 (589-590):82

(664)Wan Yi. Turbine blade distortion analysis during spiral NC milling based on FEM .Materials science forum .2012 ,723 :143

(665)宋清华. Subdivision of chatter-free regions and optimal cutting parameters based on vibration frequencies for peripheral milling process .International Journal of Mechanical Sciences .2014 ,83 :172

(666)Wan Yi. Influence of milling parameters on surface residual stresses of 7050-T7451 aluminum alloy .Materials science forum .2012 ,723 :208

(667)宋清华. Boring bar with constrained layer damper for improving process stability .The International Journal of Advanced Manufacturing Technology .2016 ,83 (9):1951

(668)Wan Yi. Damage Analysis of Cemented Carbide Tool in High Speed Milling Induced by Thermal Stress with Laser Shock .Advanced Materials research .2009 ,69-70 (0):399

(669)Sunny. Time Molding in Rough Milling of Circula .Materials science forum .2012 ,723 :87

(670)Sunny. 混合推理在难加工材料切削数据库系统的应用 .《工具技术》 .2011 ,45 (458):35

(671)周军. Intelligent matching of cutting tools with workpiece materials .Key Engineering Materials .2006 ,315-316 :411

(672)Sunny. A computer-based intelligent system for automatic tool selection .Materials science forum .2012 ,723 :238

(673)黄传真. Tool damage and its effect on the machined-surface roughness in high-speed face-milling the 17-4PH stainless steel .international Journal of Advanced Manufacturing Technology .2016 ,83 :257

(674)黄传真. Surface integrity and fatigue performance of 17-4PH stainless steel after cutting operations .Surface and Coatings Technology .2016 ,307 :182

(675)宋清华. Application of Sherman-Morrison-Woodbury formulas in instantaneous dynamic of peripheral milling for thin-walled component .International Journal of Mechanical Sciences .2015 ,96-97 :79

(676)宋清华. Dynamic analysis of rectangular thin plates of arbitrary boundary conditions under moving loads .International Journal of Mechanical Sciences .2016 ,117 :16

(677)宋清华. The influence of chatter on machining distortion for thin-walled component peripheral milling .Advances in Mechanical Engineering .2014

(678)宋清华. Prediction of cutter-workpiece engagement for five-axis ball-end milling .Materials science forum .2014 ,800-801 :254

(679)宋清华. Chatter stability for micromilling processes with flat end mill .The International Journal of Advanced Manufacturing Technology .2014 (71):1159

(680)史振宇. Actually Geometry of Milling Tool Involved in Cutting Process .Materials science forum .2012 ,723 :394

(681)宋清华. Predicting the effect of vibration on machining distortion in end milling aerospace monolithic components .2010 ASME International Manufacturing Scienc .2010 ,2 (0):51

(682)黄传真. Study on advanced cutting tools fabricated from coated powders and their cutting performance .ADVANCES IN GRINDING AND ABRASIVE PROCESSES .2004 ,19-25 :259

(683)Wan Yi. Tool wear patterns and mechanisms of solid cemented carbide in high-speed milling of aluminum alloy .Transactions of Nanjing University of Aeronautics and Astronautics .2007 ,v24 (2):125

(684)Wan Yi. 高速铣削航空铝合金7050－T7451时刀具的磨损破损 .机械工程学报 .2007 , 43 (4):103

(685)宋清华. Novel method for dynamic optimization of stability in high-speed milling system .Transactions of Nanjing University of Aeronau .2009 ,26 (3):184

(686)Sunny. Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718 .The International Journal of Advanced Manufacturing Technology .2016

(687)王桂森. Bioactivity of micropatterned TiO2 nanotubes fabricated by micro-milling and anodic oxidation .MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS .2019 ,95 :114

(688)黄传真. Tool damage and its effect on the machined-surface roughness in high-speed face-milling the 17-4PH stainless steel .international Journal of Advanced Manufacturing Technology .2016 ,83 :257

(689)邹斌. Machinability of Hastelloy C-276 Using Hot-pressed Sintered Ti(C7N3)-based Cermet Cutting Tools .chinese journal of mechanical engineering .2015 ,28 (3):599

(690)李明爽. Mechanical properties and microstructure of Al2O3-TiB2-TiSi2 ceramic tool material .Ceramics International .2017 , 43 (16):14192

(691)宋清华. Novel method for dynamic optimization of stability in high-speed milling system .Transactions of Nanjing University of Aeronau .2009 ,26 (3):184

(692)黄传真. Surface integrity and fatigue performance of 17-4PH stainless steel after cutting operations .Surface and Coatings Technology .2016 ,307 :182

(693)Wan Yi. Burr Controlling in Micro Milling with Supporting Material Method. .Procedia Manufacturing .2015 ,2015 (1):501

(694)石佳昊. Dynamic deformation of thin-walled plate with variable thickness under moving milling force .16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO) .2017 ,58 :311

(695)周军. Intelligent matching of cutting tools with workpiece materials .Key Engineering Materials .2006 ,315-316 :411

(696)Wan Yi. 高速铣削航空铝合金7050－T7451时刀具的磨损破损 .机械工程学报 .2007 , 43 (4):103

(697)宋清华. Dynamic analysis of rectangular thin plates of arbitrary boundary conditions under moving loads .International Journal of Mechanical Sciences .2016 ,117 :16

(698)宋清华. Boring bar with constrained layer damper for improving process stability .The International Journal of Advanced Manufacturing Technology .2016 ,83 (9):1951

(699)宋清华. A solid-analytical-based method for extracting cutter-workpiece engagement in sculptured surface milling .The International Journal of Advanced Manufacturing Technology .2015 ,80 :1297

(700)宋清华. Subdivision of chatter-free regions and optimal cutting parameters based on vibration frequencies for peripheral milling process .International Journal of Mechanical Sciences .2014 ,83 :172

(701)宋清华. Prediction of cutter-workpiece engagement for five-axis ball-end milling .Materials science forum .2014 ,800-801 :254

(702)Wan Yi. Identification of Stability Lobes in High-Speed Milling Flexible Parts with Bull-Nose End Mills .Key Engineering Materials .2010 ,443 :297

(703)宋清华. Predicting the effect of vibration on machining distortion in end milling aerospace monolithic components .2010 ASME International Manufacturing Scienc .2010 ,2 (0):51

(704)贾俊楠. Effect of wall roughness on performance of microchannel applied in microfluidic device .Microsystem Technologies .2018

(705)宋清华. Dynamic response and parametric analysis of geometrically nonlinear functionally graded plate with arbitrary constraints under moving mass .IEEE Access .2018

(706)石佳昊. On the segmentation-driven vibration in milling titanium alloy .Journal of Engineering Manufacture .2018

(707)巫永琳. Stability of turning process with a distributed cutting force model .The International Journal of Advanced Manufacturing Technology. .2018

(708)石佳昊. Partial Surface Damper to Suppress Vibration for Thin Walled Plate Milling .chinese journal of mechanical engineering .2017 , 30 (3):632

(709)石佳昊. A novel stability prediction approach for thin-walled component milling considering material removing process .CHINESE JOURNAL OF AERONAUTICS .2017 , 30 (5):1789

(710)石佳昊. Formulating a numerically low-cost method of a constrained layer damper for vibration suppression in thin-walled component milling and experimental validation .International Journal of Mechanical Sciences .2017 , 128 :294

(711)王冬琦. Cutting characteristics of porcine tenderloin tissue along tangenrial direction of surface .The International Journal of Advanced Manufacturing Technology. .2018

(712)宋清华. Vibration analysis of functionally graded plate with a moving mass .Applied Mathematical Modelling .2017 , 46 :141

(713)杜宜聪. Size-dependent responses of micro-end mill based on strain gradient elasticity theory .International Journal of Advanced Manufacturing Technology .2018

(714)宋清华. A time-space discretization method in milling stability prediction of thin-walled component .international Journal of Advanced Manufacturing Technology .2017 , 89 (9-):2675

(715)高建. Chatter detection and stability regions acquisition in thin-walled workpiece milling based on CMWT .International Journal of Advanced Manufacturing Technology .2018

(716)Wan Yi. Cutting Forces and Tool Wear Patterns in Five-axis Milling Fe-based Super Alloy with Bull-nose End Mill .Advanced Materials research .2010 , 97-101 (3):2049

(717)Sunny. 混合推理在难加工材料切削数据库系统的应用 .《工具技术》 .2011 ,45 (458):35

(718)Wan Yi. Damage Analysis of Cemented Carbide Tool in High Speed Milling Induced by Thermal Stress with Laser Shock .Advanced Materials research .2009 ,69-70 (0):399

(719)黄传真. Study on advanced cutting tools fabricated from coated powders and their cutting performance .ADVANCES IN GRINDING AND ABRASIVE PROCESSES .2004 ,19-25 :259

(720)Wan Yi. Tool wear patterns and mechanisms of solid cemented carbide in high-speed milling of aluminum alloy .Transactions of Nanjing University of Aeronautics and Astronautics .2007 ,v24 (2):125

(721)Sunny. Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718 .The International Journal of Advanced Manufacturing Technology .2016

(722)宋清华. Instability of internal damping due to collet chuck holder for rotating spindle-holder-tool system .Mechanism and Machine Theory .2016 ,101 :95

(723)宋清华. Application of Sherman-Morrison-Woodbury formulas in instantaneous dynamic of peripheral milling for thin-walled component .International Journal of Mechanical Sciences .2015 ,96-97 :79

(724)Wan Yi. 先进切削刀具及未来趋势 .航空制造技术 .2014 ,2014 (12):40

(725)宋清华. The influence of chatter on machining distortion for thin-walled component peripheral milling .Advances in Mechanical Engineering .2014

(726)宋清华. Chatter stability for micromilling processes with flat end mill .The International Journal of Advanced Manufacturing Technology .2014 (71):1159

(727)宋清华. Comprehensive cutting force model for milling processes with solid end mills and inserted cutters .Key Engineering Materials .2014 (589-590):82

(728)Wan Yi. Research on Thermodynamic Characteristics in High-Speed Machining System .Advanced Materials research .2011 ,188 :21

(729)Wan Yi. Research on Cutting Cast Super Alloy K24 with Milling and Abrasive Water Jet Methods .Materials science forum .2012 ,697-698 :157

(730)Wan Yi. Effect of milling speed and feed on surface residual stress of 7050-T7451 aluminum alloy .Key Engineering Materials .2012 ,499 :217

(731)Wan Yi. Influence of milling parameters on surface residual stresses of 7050-T7451 aluminum alloy .Materials science forum .2012 ,723 :208

(732)Wan Yi. Turbine blade distortion analysis during spiral NC milling based on FEM .Materials science forum .2012 ,723 :143

(733)史振宇. Actually Geometry of Milling Tool Involved in Cutting Process .Materials science forum .2012 ,723 :394

(734)Sunny. A computer-based intelligent system for automatic tool selection .Materials science forum .2012 ,723 :238

(735)Sunny. Time Molding in Rough Milling of Circula .Materials science forum .2012 ,723 :87

(736)刘逢时. 先进切削加工技术综述 .《工具技术》 .2003 ,37 (357):3

(737)宋清华. Parametric study of dynamic response of sandwich plate under moving loads .Thin-Walled structures .2018

(738)Sunny. A simulation model for predicting surface integrity coupled thermal-mechanical effect in turning of Inconel 718 super alloy .The International Journal of Advanced Manufacturing Technology. .2019 ,100 (5-8):1825

(739)石佳昊. A novel stability prediction approach for thin-walled component milling considering material removing process .中国航空学报（英文版） .2017 ,30 (05):1789

(740)宋清华. Influence of rotational damping on stability in end milling processes .International Journal of Advanced Manufacturing Technology .2018

(741)蔡玉奎. Optimum end milling tool path and machining parameters for micro Laval nozzle manufacturing .PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE .2017 , 231 (10):1703

(742)宋清华. A generalized cutting force model for five-axis milling processes .Journal of Engineering Manufacture .2018

(743)Zhanqiang Liu. 机床可用度与缓冲区容量的关系模型研究 .《工具技术》 .2006 (9):24

(744)Zhanqiang Liu. 小字号汉字的数控加工技术 .《机械制造》 .2008 ,46 (522):34

(745)Zhanqiang Liu. Hybrid modeling with finite element analysis and statistical method for residual stress prediction in peripheral milling of titanium alloy Ti-6Al-4V .International Journal of Mechanical Sciences .2016

(746)Zhanqiang Liu. Burr controlling in micro milling with supporting material method .Procedia Manufacturing .2015 ,1 :501

(747)Zhanqiang Liu. Task Scheduling and Routing Optimization for AGVs Based on Intelligent Multi-Agent technologies in Tobacco AS/RS .International Conference on Transportation Engineering 2007, ICTE 2007 .2007 :2840

(748)Zhanqiang Liu. 基于MATLAB Web Server和ASP.NET技术远程切削参数优化方法 .《机械设计与制造》 .2011 ,0 (12):85

Patents

1. 一种制备变厚度涂层样块的夹具及其使用方法

2. 一种基于对抗学习网络的带钢表面缺陷检测方法及系统

3. 一种光纤涡流超声复合无损检测仪器及检测方法

4. 一种非共振椭圆振动切削装置及其切削方法

5. 一种耦合压痕测试的光纤涡流无损检测装置及测试方法

6. 基于多域特征行为规律表征的刀具磨损监测方法及系统

7. 一种具有清洁功能的光伏面板系统

8. 一种弱刚性薄壁件装夹及变形校正装置及方法

9. 一种基于水锤效应的机翼除冰装置及工作方法

10. 一种异形壳体内形面在线测量-误差修正装置及方法

11. 一种弱刚性结构件加工变形校正及颤振抑制的工装及方法

12. 一种带有内冷射流结构的刀具

13. 一种自适应主动控制热传导切削刀片、刀具及制备方法

14. 一种异形壳体内形面在线测量-误差修正装置及方法

15. 基于荧光追踪样点的材料表层去除原位测量装置及方法

16. 一种基于液滴定向运动的飞机防除冰装置及方法

17. 基于自适应变分模态分解的在线颤振检测方法及系统

18. 一种NiTi合金表面切削工艺及粗糙度调节方法

19. 一种飞行器薄壁工件切边轨迹校正系统及方法

20. 一种基于迁移学习的跨域刀具破损监测方法及系统

21. 一种涡轮盘类零件加工工艺的验证方法

22. 一种管道内移动支撑装置及管道清理设备

23. 一种机翼除冰装置及飞行器

24. 一种用于磨削加工的柔性夹持机构及磨削加工装置

25. 一种NiTi合金表面切削工艺及粗糙度调节方法

26. 一种自锐性金属结合剂金刚石磨料层制备工艺

27. 一种确定脉冲激光焦点位置的方法及装置

28. 一种多孔NiTi/凝胶复合材料、功能合金及应用

29. 具有三级位移放大并可实现平行夹取的压电驱动微夹钳

30. 一种用于不粘锅内表面处理的加工装置及方法

31. 一种用于深腔加工的嵌入式阻尼减振车刀杆及方法

32. 一种机械手爪

33. 一种多传感信号融合监测薄壁件铣削数据降维方法及系统

34. 晶体材料零件三维晶体塑性有限元建模方法及系统

35. 一种舰船火炮自动除冰装置

36. 一种带有可调式主动断屑装置的车刀及工作方法

37. 用于增材制造的石榴状黑色陶瓷颗粒及其制备方法和应用

38. 用于3D打印的核壳状黑色陶瓷颗粒及其制备方法和应用

39. 一种可集成于铣床的刀具-工件摩擦系数测量装置及方法

40. 一种复合材料零件加工机床用粉尘吸收装置

41. 风电叶片除冰装置的移动机构、风电叶片除冰装置及方法

42. Semiconductor piezoresistive icing detector and working method thereof

43. Moving mechanism of wind power blade deicing device, wind power blade deicing

44. 用于镍、铬合金切削的表层渗碲弱化处理辅助加工方法

45. 深度生成网络辅助的功能性全冠修复体形态生成方法

46. 一种纳秒激光辅助硝酸银热分解的纳米银线制备方法、纳米银线和应用

47. 一种利用预切削法制备低摩擦系数涂层刀具的方法及刀具

48. 基于电阻值测试的刀具涂层厚度测量电极、装置及方法

49. 一种消防阀门、消防喷头及消防系统

50. 一种利用高温辅助预切削法制备硬涂层刀具的方法及设备

51. 一种机翼除冰装置及包括该除冰装置的机翼

52. 一种石墨烯复合材料直升机旋翼防除冰装置及制作方法

53. 一种用于蜂窝及复合材料加工的内吸式铣削刀具

54. 一种水膜空化与除冰液联合防除冰整流罩

55. 一种变截面减振卧式铣刀

56. 一种多尺度表面结构植入体

57. 一种多尺度表面结构植入体及其制备方法

58. 一种变口径的3D打印机挤出头及其打印方法

59. 利用低熔点合金辅助加工薄壁挠性元件的方法

60. 数字图像相关法测量高速正交切削过程应变装置及方法

61. 一种切削加工形成生物钛合金氧化膜的方法

62. 一种薄壁圆筒件车削用夹具及加工装置

63. 一种薄壁圆筒件车削用装夹方法、夹具及加工装置

64. 便携式可折叠3D打印机

65. 一种用于复杂曲面类薄壁件铣削的柔性夹具

66. 一种利用表面微沟槽减阻降噪的高速面铣刀

67. 利用低熔点合金来控制微细加工中毛刺产生的方法

68. 一种汽车中冷器翅片在线喷涂装置及翅片生产线

69. 一种用于涂层刀具抗冲击性能测试的试验装置

70. 整体式全陶瓷超密齿三面刃铣刀及其制造方法

71. 基于加工特征选择切削用量并自动设置参数的方法及系统

72. 整体式全陶瓷超密齿三面刃铣刀

73. 一种高压内冷侧流除屑的新型双螺旋钻头

74. 车削-等静压滚压复合装置

75. 多模式滚压刀具

76. 用正交切削法测定材料断裂韧性的方法

77. 涂层阻尼减振刀杆及其减振测试方法

78. 具有超高切削线速度的多功能切削装置

79. 显现镍基高温合金已加工表面白层的腐蚀剂及其制备方法和应用

80. 刀具高速断续切削性能评价测试装置

81. 一种铣削温度测试装置、系统及方法

82. 用于不同孔径管道内壁清理的旋刀式清管器及清理装置

83. 用于不同孔径管道内壁清理的旋刀式清管器及清理装置

84. 一种回转刀具高速空转噪声德测试方法

85. 一种提高干摩擦条件下铝合金表面耐磨性的方法

86. 一种用于曲面加工的可控制超声撞针复合装置及方法

87. 利用力敏粒子测量高速切削变形区应变和应变率场的装置及方法

88. 一种深二度烧伤高速旋转切痂装置

89. 一种逐层嵌套梯度功能陶瓷刀具及其制备方法

90. 一种回转刀具高速空转噪声德测试方法

91. 一种散射型周期结构阻尼减振车刀杆

92. 一种用于环形薄壁深腔加工的等刚度支承辅助装置及方法

93. 一种利用力敏粒子测量高速切削变形区应变和应变率场的装置

94. 粘弹性约束阻尼结构减振车刀杆

95. 一种用于曲面加工的压力可控超声撞针复合装置

96. 显现镍基高温合金已加工表面白层的腐蚀剂及其制备方法和应用

97. 一种深二度烧伤高速旋转切痂装置

98. 一种用于涂层刀具抗冲击性能测试的试验装置

99. 抑制毛刺产生的变刃口圆弧半径微径铣刀及其制造方法

100. 用于深Ⅱ度烧伤的电动削痂机

101. 基于加工特征选择切削用量并自动设置参数的方法及系统

102. 一种获取超高切削线速度的方法

103. 车削-等静压滚压复合装置

104. 多模式滚压刀具

Research Projects

1. 4D打印石墨烯/PLA吸波编织结构形-性一体化协同设计研究, 2025-01-01-2027-01-01

2. （包干项目）高性能加工技术, 2025-01-01-2027-12-31

3. 航空复材加工用金刚石涂层刀具的研发, 2024-12-01-2027-11-30

4. 复杂曲面构件高效精密自适应加工工艺及刀具技术, 2024-11-25-2028-12-31

5. 难加工材料与构件能场辅助高效低损伤加工研究, 2023-12-29-2026-12-31

6. 可转位刀具夹持稳定性和断屑机理研究, 2024-01-01-2026-03-31

7. 超快激光精密加工及装备研发, 2024-01-01-2026-12-31

8. 覆冰条件下风电桨叶防除冰涂层研究, 2023-12-26-2024-12-31

9. 基于仿生超滑表面的铲式触土部件抗粘脱附及耐磨机理研究 , 2022-12-30-2024-12-30

10. 科学家展览脚本库项目, 2022-10-31-2023-12-31

11. 宏微耦合系统智能控制理论与技术研究, 2023-01-01-2025-12-31

12. 热解石墨材料熔覆增韧机制及密封环功能表面的跨尺度设计加工, 2022-09-07-2026-12-31

13. 高速干切工艺使能关键技术及基础数据库（2021年奖励）, 2021-09-26-2024-06-30

14. 高速干切工艺使能关键技术及基础数据库（2021年补助）, 2021-09-26-2024-06-30

15. 高端切削刀具开发与研发技术能力提升, 2021-11-30-2026-11-30

16. GFJG-KM20220017, 2022-01-01-2023-12-31

17. 切削刀具优化及蠕墨铸铁高效切削的研究, 2021-08-01-2025-12-31

18. 精密数控机床传感器制造关键技术及应用示范, 2020-12-01-2023-12-01

19. 精密数控机床传感器制造关键技术及应用示范, 2020-12-01-2023-12-31

20. 精密数控机床传感器制造关键技术及应用示范-2, 2020-12-01-2023-12-31

21. 精密数控机床传感器制造关键技术及应用示范-4, 2020-12-01-2023-12-31

22. 精密数控机床传感器制造关键技术及应用示范, 2020-12-01-2023-12-31

23. 高速干切工艺使能关键技术及基础数据库, 2020-10-22-2022-12-31

24. 2019年科技创新发展基金-山东省高效切削加工工程技术研究中心, 2019-06-01-2021-12-31

25. 高速干切削机理与新型机床工具系统设计理论及方法, 2019-06-01-2022-06-30

26. 基于长服役寿命的航空发动机典型难加工材料零件高性能切削技术, 2014-01-01-2016-12-31

27. 高速高效刀具切削性能评价与设计技术, 2007-11-09-2010-08-09

28. 基于能场作用机理的高完整性表面高速切削应用基础研究, 2018-06-22-2021-12-31

29. 基于长疲劳寿命的GH4169镍基高温合金切削变质层微观组织结构演变及形成机理研究, 2019-04-26-2022-06-30

30. 复合材料风电桨叶电热及石墨烯涂覆防/除冰技术研究, 2019-04-26-2022-06-30

31. 石墨密封环表面熔覆浸渍强化机理及微织构设计加工, 2019-04-26-2022-06-30

32. 弱刚性工艺系统高性能加工, 2019-04-26-2022-06-30

33. 艾兴学术成长资料采集, 2019-06-30-2021-12-31

34. 某机1-3级叶片的高效加工研究, 2008-12-04-2008-12-31

35. 微通道超疏水表面设计及表面粗糙度控制研究, 2013-10-01-2015-12-31

36. 超细晶粒整体硬质合金涂层精密刀具的研究与开发, 2009-01-30-2011-12-30

37. 面向航空发动机高温合金盘件长疲劳寿命的加工表面状态与性质演化及调控机制研究, 2018-12-07-2022-12-31

38. 汽车大型覆盖件全自动柔性冲压生产线, 2017-01-01-2019-12-31

39. 精密刀具动态性能与涂层刀具切削性能强化, 2015-01-01-2017-12-31

40. 切削、磨削加工工艺与装备, 2015-01-01-2019-12-31

41. 汽车发动机配套精密高效刀具开发—自筹经费, 2013-01-01-2014-12-31

42. 激光熔覆粉末不锈钢的切削机理与工艺基础研究, 2013-08-15-2017-12-31

43. 激光熔覆立柱以车代磨工艺技术, 2013-04-03-2013-12-31

44. 高速硬铣削加工多层多元纳米复合涂层刀具及其切削性能研究, 2013-01-01-2016-12-31

45. 第五届高速加工国际会议, 2012-08-01-2012-12-31

46. 汽车发动机配套精密高效刀具开发, 2012-01-01-2014-12-31

47. 制造业信息化过程中的实时协调控制与重构的方法与应用, 2005-01-01-2005-10-30

48. 面向对象的快速可重构生产线虚拟设计技术的研究与开发, 2002-12-30-2004-12-30

49. 高速精密微细5轴加工中心的研究与开发, 2007-12-30-2009-12-30

50. 高档数控机床切削动力学特性测试技术研究, 2008-10-01-2010-09-30

51. 切削刀具基础数据平台的建立, 2009-01-01-2010-12-31

52. 多场耦合强作用下超高速加工的切削学行为, 2009-01-01-2010-12-31

53. 多场耦合强作用下超高速切削机理研究, 2011-01-01-2013-12-31

54. 精密工具创新能力平台建设, 2010-01-01-2011-12-31

55. 高速数控机床用新型工具系统, 2009-03-01-2010-12-31

56. 一种研究金属直角切削切屑形成的方法（专利许可）, 2011-04-08-2011-05-01

57. 关于YF45MnV非调质钢切削性能试验委托协议, 2008-06-11-2008-12-31

58. 面向对象的虚拟可重构多生产线规划设计与仿真的研究, 2005-10-10-2007-12-30

59. 高速切削基础理论与加工精度研究

60. 高速刀具实验条件设计与建设, 2011-01-01-2013-12-31

61. 基于多重尺度效应耦合的超硬微铣刀设计理论和制造技术, 2010-01-01-2013-12-31

62. 超高速微细切削加工变形学研究, 2009-11-01-2012-12-31

63. 高速面铣刀气动噪声产生机理及其拓扑结构优化研究, 2010-01-01-2012-12-31

64. 基于最长疲劳寿命的超高强度钢干硬切削加工表面完整性与工艺优化研究, 2009-01-01-2010-12-30

65. 高速微细切削加工的关键科学问题研究, 2007-12-01-2010-12-31

66. 基于应变梯度塑性理论的高速微细切削变形学研究, 2007-01-01-2009-12-31

67. 快速可重构活塞自动生产线的虚拟设计, 2005-01-30-2007-12-30

68. 混合智能推理高速切削数据库的研究, 2004-01-01-2006-12-30

69. 高速切削加工过程的集成建模与仿真研究, 2003-12-01-2006-12-30

70. 基于涂层热电效应的刀具瞬态切削温度测试方法, 2009-11-27-2009-12-31