Paper Publications
-
[621] aixing , Zhanqiang Liu and Song Qinghua. Predicting the effect of vibration on machining distortion in end milling aerospace monolithic co.... 2010 ASME International Manufacturing Scienc, 2, 51, 2010.
-
[622] Zhanqiang Liu and huangchuanzhen. Study on advanced cutting tools fabricated from coated powders and their cutting performance. ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 19-25, 259, 2004.
-
[623] Zhanqiang Liu , aixing and Wan Yi. Tool wear patterns and mechanisms of solid cemented carbide in high-speed milling of aluminum all.... Transactions of Nanjing University of Aeronautics and Astronautics, v24, 125, 2007.
-
[624] aixing , Zhanqiang Liu and Wan Yi. 高速铣削航空铝合金7050-T7451时刀具的磨损破损. 机械工程学报, 43, 103, 2007.
-
[625] Wan Yi , aixing , zhaojun , Zhanqiang Liu and Song Qinghua. Novel method for dynamic optimization of stability in high-speed milling system. Transactions of Nanjing University of Aeronau, 26, 184, 2009.
-
[626] Zhanqiang Liu and Sunny. Influence of cutting parameters on work hardening behavior of surface layer during turning supera.... The International Journal of Advanced Manufacturing Technology, 2016.
-
[627] Wan Yi , Zhanqiang Liu and 王桂森. Bioactivity of micropatterned TiO2 nanotubes fabricated by micro-milling and anodic oxidation. MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 95, 114, 2019.
-
[628] Zhanqiang Liu and huangchuanzhen. Tool damage and its effect on the machined-surface roughness in high-speed face-milling the 17-4P.... international Journal of Advanced Manufacturing Technology, 83, 257, 2016.
-
[629] huangchuanzhen , Zhanqiang Liu and zoubin. Machinability of Hastelloy C-276 Using Hot-pressed Sintered Ti(C7N3)-based Cermet Cutting Tools. chinese journal of mechanical engineering, 28, 599, 2015.
-
[630] Zhanqiang Liu and 李明爽. Mechanical properties and microstructure of Al2O3-TiB2-TiSi2 ceramic tool material. Ceramics International, 43, 14192, 2017.
-
[631] Wan Yi , aixing , zhaojun , Zhanqiang Liu and Song Qinghua. Novel method for dynamic optimization of stability in high-speed milling system. Transactions of Nanjing University of Aeronau, 26, 184, 2009.
-
[632] zoubin , Zhanqiang Liu and huangchuanzhen. Surface integrity and fatigue performance of 17-4PH stainless steel after cutting operations. Surface and Coatings Technology, 307, 182, 2016.
-
[633] Zhanqiang Liu and Wan Yi. Burr Controlling in Micro Milling with Supporting Material Method.. Procedia Manufacturing, 2015, 501, 2015.
-
[634] Song Qinghua , Zhanqiang Liu , Wan Yi and 石佳昊. Dynamic deformation of thin-walled plate with variable thickness under moving milling force. 16TH CIRP CONFERENCE ON MODELLING OF MACHINING OPERATIONS (16TH CIRP CMMO), 58, 311, 2017.
-
[635] dengjianxin , Zhanqiang Liu and 周军. Intelligent matching of cutting tools with workpiece materials. Key Engineering Materials, 315-316, 411, 2006.
-
[636] aixing , Zhanqiang Liu and Wan Yi. 高速铣削航空铝合金7050-T7451时刀具的磨损破损. 机械工程学报, 43, 103, 2007.
-
[637] Zhanqiang Liu , Wan Yi and Song Qinghua. Dynamic analysis of rectangular thin plates of arbitrary boundary conditions under moving loads. International Journal of Mechanical Sciences, 117, 16, 2016.
-
[638] Zhanqiang Liu and Song Qinghua. Boring bar with constrained layer damper for improving process stability. The International Journal of Advanced Manufacturing Technology, 83, 1951, 2016.
-
[639] Zhanqiang Liu , Wan Yi and Song Qinghua. A solid-analytical-based method for extracting cutter-workpiece engagement in sculptured surface .... The International Journal of Advanced Manufacturing Technology, 80, 1297, 2015.
-
[640] Zhanqiang Liu , aixing and Song Qinghua. Subdivision of chatter-free regions and optimal cutting parameters based on vibration frequencies.... International Journal of Mechanical Sciences, 83, 172, 2014.