Zhanqiang Liu
Professor
山东大学教授，从事制造工程理论与技术研究，机械工程学院学术委员会主任，山东省高效切削加工工程技术研究中心主任，高效洁净机械制造教育部重点实验室（山东大学）副主任，山东省高等学校高端装备设计制造与刀具技术实验室主任。 国家杰出青年科学基金获得者、国务院政府特殊津贴专家、宝钢优秀教师、山东省泰山学者特聘教授、山东省有突出贡献的中青年专家、教育部新世纪优秀人才、山东省优秀教师、山东省杰出青年科学基金获得者、霍英东教育基金会高等院校青年教... More+
Paper Publications
-
[161] 马海峰. Saturated adaptive barrier sliding mode control with state-dependent uncertainty limit. IET Contorl Theory and Applications, 15, 1762, 2021.
-
[162] 马海峰. Disturbance estimator-based switching function for discrete-time sliding mode control systems wit.... Transactions of the Institute of Measurement and Control, 43, 2715, 2021.
-
[163] 陈龙. Graphene Nanoarchitectonics: A New Material Horizon for Reinforcement of Sustainable Polymers. Frontiers in Materials, 7, 2020.
-
[164] 陈龙. Microstructure simulation and heat transfer optimization for graphene oxide doped anti-/deicing c.... Composites Science and Technology, 213, 2021.
-
[165] 陈龙. Mathematical modeling of heat transfer in GO-doped reinforce polymer for anti-/deicing of wind tu.... International Communications in Heat and Mass Transfer, 123, 2021.
-
[166] 任小平. Effects of Machined Surface Integrity on High-Temperature Low-Cycle Fatigue Life and Process Para.... MATERIALS, 14, 2021.
-
[167] 姜佳明. Formation mechanism of tearing defects in machining Nomex honeycomb core. international Journal of Advanced Manufacturing Technology, 112, 3167, 2021.
-
[168] 李国英. Effect of element Te on alterations of microstructure and mechanical property of nickel-based sup.... Applied Surface Science, 544, 2021.
-
[169] Liu, Yang. Stochastic Cutting Force Modeling and Prediction in Machining. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 142, 2020.
-
[170] 柳月. Optimisation of Planning Parameters for Machining Blade Electrode Micro-Fillet with Scallop Heigh.... MICROMACHINES, 12, 2021.
-
[171] 王鑫. A cost-effective serpentine micromixer utilizing ellipse curve. ANALYTICA CHIMICA ACTA Journal, 1155, 2021.
-
[172] 马海峰. Saturated adaptive barrier sliding mode control with state-dependent uncertainty limit. IET Control Theory & Applications, 2021.
-
[173] 刘战强. Milling of Ti–6Al–4V under hybrid Al2O3-MWCNT nanofluids considering energy consumption, surfac.... The International Journal of Advanced Manufacturing Technology, 2020.
-
[174] 牛佳慧. A comprehensive method for selecting cutting tool materials. international Journal of Advanced Manufacturing Technology, 110, 229, 2020.
-
[175] Su, Guosheng. On cutting temperatures in high and ultrahigh-speed machining. international Journal of Advanced Manufacturing Technology, 107, 73, 2020.
-
[176] 刘战强. 商用车挡泥板总成失效分析与试验规范制定. 《工程设计学报》, 2020.
-
[177] 刘国梁. The modification of corrosion resistance of 17-4PH stainless steel by cutting process. Journal of Manufacturing Processes, 49, 447, 2020.
-
[178] 赵文明. 整体叶盘铣削数控编程与加工技术. 航空制造技术, 58, 2017.
-
[179] 王宏卫. Biomechanical analysis of combination Ti/PEEK fusion cage designed with topology optimization. International Journal of Applied Electromagnetics and Mechanics, 64, 1245, 2020.
-
[180] 马海峰. Disturbance estimator based switching function for DSMC systems with control saturation. Transactions of the Institute of Measurement and Control, 2021.